* Remove contrib/testingcds. For now the entire setup directory used to

build Debian CDs is in svn at svn+ssh://svn.debian.org/svn/debian-cd/setup
This commit is contained in:
Joey Hess 2005-09-06 14:25:28 +00:00
parent 10f1ae01cc
commit 353d57dffd
3 changed files with 7 additions and 261 deletions

View File

@ -1,258 +0,0 @@
#!/bin/bash
#
# testingcds (c) 2005 Santiago Garcia Mantinan <manty@manty.net>
#
# GPL v2
#
# This file is included here just as an example, it was used when building the
# official testing cds at some point, it was written for a very specific setup
# and then went over a lot of changes during its life, so now this code is
# horrible, hoever some fellows feel it should be included in debian-cd,
# well, I (manty) will leave that on their hands.
#
# The setup we have uses normal debian-cd for daily builds, while it uses a jte
# patched debian-cd for weekly builds, this is done just for speed, the script
# should work with normal debian-cd for all kind of builds just removing -jte
# down there. We are currently just building isos for dailies and jigdos for
# weeklies, no snapshots being generated on the build machine, so I cannot
# waranty that all the code down here works, again, I must stress that you
# should take this just as an example, because part of it is untested and
# the rest is written for a very very specific setup, so... no waranties at all
#
# This is how this script is called for the daily images:
# OMIT_MANUAL=1 NORECOMMENDS=1 NOSUGGESTS=1 COMPLETE=0 INSTALLER_CD=1 TASK=tasks/debian-installer-sarge DOJIGDO=0 DI=sarge DI_DIST=sarge ./testingcds "$arch"
# OMIT_MANUAL=1 NORECOMMENDS=1 NOSUGGESTS=1 COMPLETE=0 INSTALLER_CD=2 TASK=tasks/debian-installer+kernel-sarge DOJIGDO=0 DI=sarge DI_DIST=sarge ./testingcds "$arch"
# OMIT_MANUAL=1 NORECOMMENDS=1 NOSUGGESTS=1 COMPLETE=0 INSTALLER_CD=1 TASK=tasks/debian-installer-sid DOJIGDO=0 DI=sid DI_WWW_HOME=default DI_DIR="$ARCH_DI_DIR" ./testingcds "$arch"
# OMIT_MANUAL=1 NORECOMMENDS=1 NOSUGGESTS=1 COMPLETE=0 INSTALLER_CD=2 TASK=tasks/debian-installer+kernel-sid DOJIGDO=0 DI=sid DI_WWW_HOME=default DI_DIR="$ARCH_DI_DIR" ./testingcds "$arch"
# This is respectively for sarge_d-i businesscards, sarge_d-i netinsts,
# sid_d-i businesscards, and sid_d-i netinsts.
# Where $ARCH_DI_DIR is set to the path for the local mirror of the d-i daily
# built images, this parameter can be omited if no mirror of the images is used
# For the weekly images it is run for normal cds like this:
# DI_DIST=sarge ./testingcds "$arch"
# and for the dvds like this:
# PUBDIRJIG=/path_to_the/dvd INSTALLER_CD=3 DEFBINSIZE=4440 DEFSRCSIZE=4432 DI_DIST=sarge ./testingcds "$arch"
# Set up and cleaning
if [ $# -lt 1 ]
then
echo $0 \$ARCH
echo "variables: PUBDIR[ISO|JIG]"
exit 1
fi
if [ ! "$DATE" ];then DATE=`/bin/date -u +%Y%m%d`;fi
export ARCH=$1
export PATH=$PATH:/sbin:/usr/sbin
if [ ! "$PUBDIRJIG" ];then PUBDIRJIG=/org/cdimage.debian.org/www/testing/cd;fi
if [ ! "$PUBDIRISO" ];then PUBDIRISO=/org/cdimage.debian.org/www/testing;fi
if [ ! "$JIGDOFALLBACKURLS" ];then
if [ "$ARCH" = "amd64" ];then
export JIGDOFALLBACKURLS="Debian=http://amd64-cdsnap.debian.net/cdimage/snapshot-amd64/Debian/"
else
export JIGDOFALLBACKURLS="Debian=http://us.cdimage.debian.org/cdimage/snapshot/Debian/"
fi
fi
# $DI is used to set DI_CODENAME and also to specify the directory for images
if [ "$DI" ];then
export DI_CODENAME="$DI"
PUBDIRJIG="$PUBDIRJIG"/"$DI"_d-i
PUBDIRISO="$PUBDIRISO"/"$DI"_d-i
fi
CALC="Using previous sizes estimations."
if [ "$INSTALLER_CD" = "1" -o "$INSTALLER_CD" = "2" ]
then
# Do a tradicional build for the ISOs of the small cds
cd /org/cdimage.debian.org/setup/debian-cd &&
. ../CONF.sh
# this is for build.sh
export CF=../CONF.sh
export IMAGETARGET=bin-official_images
# to save some time
export SKIPMIRRORCHECK=yes
else
# Do the size stimation and a JTE build for jigdos
cd /org/cdimage.debian.org/setup/debian-cd-jte &&
. ../CONF.sh &&
export IMAGETARGET="ok bootable upgrade bin-infos bin-list" &&
export CF=../CONF.sh &&
./build.sh $ARCH >/dev/null 2>&1 &&
cd tools && CALC=`./calc` && cd ..
# this is for build.sh
if [ "$ARCH" = "i386" ]
then
export IMAGETARGET=official_images
else
export IMAGETARGET=bin-official_images
fi
fi
if [ ! "$OUT" ];then echo Error on the config;exit 1;fi
if [ "$INSTALLER_CD" = "1" ];then export OFFICIAL="Official BusinessCard Snapshot";fi
if [ "$INSTALLER_CD" = "2" ];then export OFFICIAL="Official NetInst Snapshot";fi
export LOG="`pwd`/../log/"
rm -rf "$OUT"
mkdir -p "$OUT"
mkdir -p "$LOG"
overview_log="$LOG/overview"
overview () {
if [ -e $overview_log ]; then
grep -v " $1 " $overview_log > $overview_log.new
mv $overview_log.new $overview_log
fi
LANG=C echo "$(dpkg --print-architecture) ($(date)) $(whoami)@$(hostname | cut -d . -f 1) $1 $2" >> $overview_log
}
# Upgrade sarge's debian-installer task file
# changed this old line into the new one so that amd64 doesn't break
# cd tasks && ../tools/generate_di_list && ../tools/generate_di+k_list && cd .. || exit 1
cd tasks && ../tools/generate_di_list ; ../tools/generate_di+k_list ; cd ..
DEBOOTUDEB=`/bin/sed -n \
's/Filename: \(pool\/main\/d\/debootstrap\/debootstrap-udeb.*udeb\)$/\1/p' \
$MIRROR/dists/$DI_CODENAME/main/debian-installer/binary-$ARCH/Packages`
if [ -z "$DEBOOTUDEB" ];then exit 1;fi
echo "$CALC" >"$LOG/$INSTALLER_CD$DI$ARCH"
echo Using ${DEBOOTUDEB##*/} to get packages used by d-i. >>"$LOG/$INSTALLER_CD$DI$ARCH"
rm -rf ../debootstrap
dpkg -x "$MIRROR/$DEBOOTUDEB" ../debootstrap
# Do the actual building
if ./build.sh $ARCH >>"$LOG/$INSTALLER_CD$DI$ARCH" 2>&1;then
# if it went ok get things ready for publishing
# we treat the netinst images in a different way
if [ "$INSTALLER_CD" = "1" -o "$INSTALLER_CD" = "2" ]
then
# NETINST STUFF (ISO ONLY)
# make the dirs we'll use to publish things
mkdir -p "$OUT"/$ARCH
# rename the isos from .raw to .iso and put them in their place
for i in "$OUT"/*-1.raw
do
I=${i##*/}
if [ "$INSTALLER_CD" = "1" ];then
NETINSTNAME=${I%-binary-1.raw}-businesscard.iso
else
NETINSTNAME=${I%-binary-1.raw}-netinst.iso
fi
mv $i "$OUT"/$ARCH/$NETINSTNAME
done
# change images names from raw to iso on the MD5SUMS
sed "s/[^ ]*-1.raw$/$NETINSTNAME/" "$OUT"/MD5SUMS >>"$OUT"/$ARCH/MD5SUMS
# Publish the new version
mkdir -p "$PUBDIRISO"/$ARCH/$DATE
if [ -e "$PUBDIRISO"/$ARCH/$DATE/MD5SUMS ];then
grep -v $NETINSTNAME "$PUBDIRISO"/$ARCH/$DATE/MD5SUMS > "$PUBDIRISO"/$ARCH/$DATE/MD5SUMS.tmp
fi
cat "$OUT"/$ARCH/MD5SUMS >> "$PUBDIRISO"/$ARCH/$DATE/MD5SUMS.tmp
mv "$PUBDIRISO"/$ARCH/$DATE/MD5SUMS.tmp "$PUBDIRISO"/$ARCH/$DATE/MD5SUMS
mv "$OUT"/$ARCH/$NETINSTNAME "$PUBDIRISO"/$ARCH/$DATE/
rm -f "$PUBDIRISO"/$ARCH/current
ln -s $DATE "$PUBDIRISO"/$ARCH/current
# Remove the oldest daily builds, leave only the last 3
NUM=`/bin/ls -d "$PUBDIRISO"/$ARCH/20*/|wc -l`
NUM=$(($NUM-3))
/bin/ls -d "$PUBDIRISO"/$ARCH/20*/|head -n $NUM|tr '\012' '\000'|xargs -0 /bin/rm -rf --
else
# NORMAL STUFF, IE NORMAL ISO and JIGDO
# ISO STUFF
if [ "$DOJIGDO" != 2 ]
then
# make the dirs we'll use to publish things
mkdir -p "$OUT"/isos/$ARCH
# rename the isos from .raw to .iso and put them in their place
for i in "$OUT"/*.raw
do
I=${i##*/}
mv $i "$OUT"/isos/$ARCH/${I%.raw}.iso
done
# change images names from raw to iso on the MD5SUMS
sed 's/raw$/iso/' "$OUT"/MD5SUMS >"$OUT"/isos/$ARCH/MD5SUMS
# Remove the old version and publish the new one
rm -rf "$PUBDIRISO"/isos/$ARCH/
mkdir -p "$PUBDIRISO"/isos/
mv "$OUT"/isos/$ARCH/ "$PUBDIRISO"/isos/$ARCH/
fi
# JIGDO STUFF
if [ "$DOJIGDO" != 0 ]
then
# make the dirs we'll use to publish things
mkdir -p "$OUT"/jigdo-area/$ARCH/jigdotemplates
# change images names from raw to iso on the MD5SUMS
sed 's/raw$/iso/' "$OUT"/MD5SUMS >"$OUT"/jigdo-area/$ARCH/MD5SUMS
# put the templates aside
mv "$OUT"/*.template "$OUT"/jigdo-area/$ARCH/jigdotemplates
# finish up the jigdos (compress & move them)
gzip --best --no-name "$OUT"/*.jigdo
for i in "$OUT"/*.jigdo.gz;do mv $i ${i%.gz};done
mv "$OUT"/*.jigdo "$OUT"/jigdo-area/$ARCH/
# Remove the old version and publish the new one
if [ "$IMAGETARGET" = "official_images" ]
then
rm -rf "$PUBDIRJIG"/jigdo-area/source/
mkdir -p "$PUBDIRJIG"/jigdo-area/source/jigdotemplates/
mv "$OUT"/jigdo-area/$ARCH/*-source-*.jigdo "$PUBDIRJIG"/jigdo-area/source/
grep "source-.*.iso$" "$OUT"/jigdo-area/$ARCH/MD5SUMS > "$PUBDIRJIG"/jigdo-area/source/MD5SUMS
mv "$OUT"/jigdo-area/$ARCH/jigdotemplates/*-source-*.template "$PUBDIRJIG"/jigdo-area/source/jigdotemplates/
grep -v "source-.*.iso$" "$OUT"/jigdo-area/$ARCH/MD5SUMS > "$OUT"/jigdo-area/$ARCH/MD5SUMS.new
mv "$OUT"/jigdo-area/$ARCH/MD5SUMS.new "$OUT"/jigdo-area/$ARCH/MD5SUMS
fi
rm -rf "$PUBDIRJIG"/jigdo-area/$ARCH/
mkdir -p "$PUBDIRJIG"/jigdo-area/
mv "$OUT"/jigdo-area/$ARCH/ "$PUBDIRJIG"/jigdo-area/$ARCH/
# Calculate snapshot path, remove the old snapshot and publish the new one
# SNAP=${JIGDOFALLBACKURLS##Debian=http://us.cdimage.debian.org/cdimage/}
# SNAP=${PUBDIRJIG%%testing*}${SNAP%%/Debian*}
# mkdir -p "$SNAP"
# mv "$OUT"/snapshot/* "$SNAP"
# Remove the oldest snapshots, leave only the last 2
# NUM=`/bin/ls -d "${SNAP%%/$DATE}"/20*/|wc -l`
# NUM=$(($NUM-2))
# /bin/ls -d "${SNAP%%/$DATE}"/20*/|head -n $NUM|tr '\012' '\000'|xargs -0 /bin/rm -rf --
fi
fi
# Mail the cd sizes of the cds
if [ -e "../.debian-cd.mail" ]
then
MYEMAIL=`grep -v "^#" "../.debian-cd.mail"`
else
MYEMAIL=`whoami`
fi
for i in $MYEMAIL
do
grep "extents written" "$LOG/$INSTALLER_CD$DI$ARCH"|mail -s "testingcds $INSTALLER_CD$DI$ARCH went ok" "$i"
done
overview "$INSTALLER_CD$DI$ARCH" success
else
if [ -e "../.debian-cd.mail" ]
then
MYEMAIL=`grep -v "^#" "../.debian-cd.mail"`
else
MYEMAIL=`whoami`
fi
for i in $MYEMAIL
do
echo Error when trying to create cds for $INSTALLER_CD$DI$ARCH|mail -s "testingcds $INSTALLER_CD$DI$ARCH has failed" "$i"
done
overview "$INSTALLER_CD$DI$ARCH" failed
fi

8
debian/changelog vendored
View File

@ -1,6 +1,6 @@
debian-cd (2.2.24) UNRELEASED; urgency=low
* Frans Pop
[ Frans Pop ]
- Update for Sparc:
- sparc64: switch to 2.6.12 kernel; make CD multiboot 2.6 and 2.4,
using 2.6.12 by default
@ -8,7 +8,11 @@ debian-cd (2.2.24) UNRELEASED; urgency=low
- restructure silo.conf with proper support for install, expert and
rescue boot options
-- Frans Pop <fjp@debian.org> Mon, 5 Sep 2005 22:58:18 +0200
[ Joey Hess ]
* Remove contrib/testingcds. For now the entire setup directory used to
build Debian CDs is in svn at svn+ssh://svn.debian.org/svn/debian-cd/setup
-- Joey Hess <joeyh@debian.org> Tue, 6 Sep 2005 10:24:36 -0400
debian-cd (2.2.23) unstable; urgency=low

2
debian/rules vendored
View File

@ -58,7 +58,7 @@ binary-indep: build install
dh_testdir
dh_testroot
dh_installdocs README*
dh_installexamples contrib/testingcds
dh_installexamples
dh_installmenu
# dh_installemacsen
# dh_installinit