5aa7863d82
Also extract isolinux.bin from the syslinux package in the case of etch
...
CD images (since it's no more provided by debian-cd itself).
2008-11-07 16:32:06 +00:00
7b28512cf9
Don't try to copy sbm on etch CD images as it got removed.
2008-11-07 15:53:36 +00:00
d0734e24cc
Actually move the file
2008-11-02 09:25:55 +00:00
23f23e05c9
Actually move the file
2008-11-02 09:23:09 +00:00
6853ba25d6
Update update_popcon to cope better with errors; now uses curl instead of wget
2008-11-02 09:20:39 +00:00
7567a51136
Remove last few references to (raw)list.exclude
2008-11-01 23:11:52 +00:00
b45e780519
Rename list2cds to sort_deps - more accurate name now that other code does the per-disc splitting later
2008-11-01 23:08:01 +00:00
bdb3e3984b
Remove no longer used references to rawlist.exclude and list.exclude files
...
These files have not been used since the introduction of make_disk_trees.pl.
Remove remaining references, which results in a nice clean up of the Makefile.
2008-11-01 23:06:59 +00:00
e59ad475b0
Drop brltty from the netinst CDs
...
brltty has started pulling in libicu, which has a size of 5MB.
An overhead of 5MB is just too big for netinst CD images for a
package that is only needed by a very small group of users and
that will normally also be available from a mirror (brltty gets
installed during finish-install).
For full CDs and DVDs the package will still get included as it's
listed in forcd1.
2008-10-29 14:02:42 +00:00
274c7dd7a0
Revert "Drop ancient workaround for dependency resolution"
...
Looks like the workaround is still needed after all, so just remove
unifont from the packages that are forced.
Also, add pptp-linux to images using the di+k list instead of through
this hack (changelog says adding it here needed "FIXME later...").
2008-10-14 12:39:32 +00:00
9200e82ade
Stop including jfbterm unifont on all images
...
They are no longer installed from D-I as jbfterm was only needed for
base-config and unifont's dependencies have become insane.
Saves 15MB on i386 netinst images.
2008-10-14 11:37:03 +00:00
aec7c50df4
Add easy-build.sh script
...
A new wrapper script around build.sh that should make it a lot easier
for new users to use debian-cd and to build custom images.
2008-10-14 08:22:03 +00:00
bb9fad3216
Allow multi-arch builds using D-I images from official mirrors or local D-I images
...
This is made possible by allowing to include a "%ARCH%" placeholder in the
environment variables DI_WWW_HOME and DI_DIR which is expanded to the correct
value at runtime.
Supported for Etch and later.
2008-10-14 08:22:00 +00:00
d48db452d6
Make use of MAXISOS and MAXJIGDOS more consistent
2008-10-14 08:21:57 +00:00
07a91b45e3
Drop support for building Sarge CDs
2008-10-14 08:02:21 +00:00
1a0904ab00
Improve temp dir handling
2008-10-12 23:54:01 +00:00
45617b2d30
* Support KERNEL_PARAMS for powerpc, alpha and sparc ( Closes : #416230 )
...
Thanks to Vagrant Cascadian for the patch.
2008-10-12 23:30:19 +00:00
dcccd50f85
more cleanup in update_tasks
2008-10-12 23:25:48 +00:00
59e4f05035
slight cleanup in update_tasks
2008-10-12 23:08:57 +00:00
9202a3e6e8
Also remove advanced syslinux config files for gtk
...
Note that AFAICT removing these files is unnecessary as they should not
be included in the tarball if the file f3.txt.withgtk is not present.
2008-09-21 22:02:22 +00:00
1dd8261809
Update for syslinux config file rename in D-I
...
The files (ad)amd.cfg were renamed to (ad)amdtext.cfg for consistency.
2008-09-21 22:02:10 +00:00
704a350c35
Make sure directory to unpack syslinux in exists
...
Also make indentation consistent
2008-09-18 18:26:14 +00:00
3580191792
Remove all mention of sbm; no longer needed
2008-09-16 15:29:55 +00:00
7a81292e18
Fix silly thinko
2008-09-16 01:40:15 +00:00
60dbf627e2
* Major licensing problem cleanup: ( Closes : #497270 )
...
+ Remove binary blobs from the package; pull those files from the
.debs in the archive as needed (isolinux.bin, vesamenu.c32)
+ sbm.bin *not* yet worked out, so drop it for now
+ Pull out the code to find the right deb and put it in a new helper
shell script (tools/which_deb), called from Makefile and boot-* as
needed.
2008-09-15 23:09:18 +00:00
7462c548dc
* Improve control over production of iso and jigdo files. Replace the
...
simple DOJIGDO config option with MAXISOS and MAXJIGDOS, allowing
more flexibility. Allows us to only produce a small number of iso
images for less-popular architectures but still produce all the jigdo
files, saving a lot of disk space.
2008-09-10 22:16:18 +00:00
58a40d32b7
Cope better with source/binary package mismatches
2008-09-10 21:59:32 +00:00
b598c30a47
* Add the "-joliet-long" option when making images with Joliet names.
...
Some packages with ridiculously long names are not unique in the
first 64 characters, so normal Joliet sorting fails.
2008-09-08 21:53:45 +00:00
0a1de9d57a
Include multipath-tools-boot for all medias.
2008-09-08 17:43:16 +00:00
52918ed9f0
Only include atl2 packages on i386 and amd64 medias since d-i do not use them on all other arches
2008-08-30 00:41:08 +00:00
3c6d87722f
* Include packages needed for systems using atl2 network adator.
...
* Include speakup modules for i386 and amd64 medias.
2008-08-28 23:21:33 +00:00
e24b17a1e7
Add packages needed for systems using loop-aes encryption
...
Make sure packages (loop-aes-utils and loop-aes kernel modules)
are included on the installation CD in case loop-aes encryption
is used during partitioning.
2008-08-04 17:06:30 +00:00
b402ea3ba7
* Applied patch from Robert Millan <rmh@aybabtu.com> to allow choice of
...
desktop when building for win32-loader. Closes : #491300 .
2008-07-29 17:29:32 +00:00
787f433fe6
Correct location of images for ia64
2008-07-16 20:02:15 +00:00
311d0a1273
Daily builds for ia64 have moved
2008-07-16 20:02:11 +00:00
76dab60727
Daily builds for m68k have moved
2008-07-16 20:02:08 +00:00
d8c8f095e6
Support including packages from proposed-updates
...
This can be useful for pre-release testing of point releases, but should
be used with care when CDs are intended to be published.
2008-07-13 11:45:10 +00:00
26e0a2413d
Workaround: don't include source for udebs in images
...
* list2cds: set "Component" for udebs to "debian-installer
* merge_package_lists: skip udebs when including source
When building images for Etch+1/2, which takes regular packages from
stable and udebs from testing, there is a problem when adding source
for udebs as existing code will take source for both debs and udebs
from stable. This can result in either incorrect source being included
(version mismatch) or errors (new udebs for which no match can be found
in the Source.gz file that is used).
A proper solution would require that the debian-installer section gets
its own Sources.gz file, but that is currently just not available.
After trying some things the conclusion was that the best solution for
now is to just not include source for udebs at all.
Patch written by Steve McIntyre.
2008-07-13 11:33:35 +00:00
0ae829d756
Add sanity check for data passed to add_packages
2008-07-13 11:33:14 +00:00
fe768847b1
swap tabs to spaces
2008-07-06 21:08:21 +00:00
03305d23f2
Fix bashism in tools/grab_md5. Closes : #489562
2008-07-06 21:01:18 +00:00
71039d6ead
* Add support for dual-layer DVD, Blu-Ray and dual-layer Blu-Ray
...
discs. Nothing special, just extra sizes recognised.
2008-06-28 14:08:41 +00:00
50b9093086
Updated code. Parse tasks/firmware to get the list of firmware
...
packages wanted, then grab the package file names from the Packages.gz
files in the appropriate release.
2008-06-25 00:24:09 +00:00
68b3e63cfa
minor update
2008-06-23 21:57:37 +00:00
3a29fb0a8b
Initial cut of make-firmware-image, a simple script to create .tar.gz
...
and .zip files containing non-free firmware and microcode packages.
2008-06-23 21:55:36 +00:00
b4fd0dfd9b
use isolinux rather than
2008-06-08 22:32:11 +00:00
55bd8d23b1
better anchor for search
2008-06-08 22:17:30 +00:00
83ac3d95a3
Add support for custom kernel params for all isolinux configurations
2008-06-08 22:13:42 +00:00
09dab01bb4
Change match order
2008-06-07 19:31:29 +00:00
9c027571ba
Move update_tasks to using mawk rather than gawk. It's *much*
...
faster. Needs some slight changes in regular expression handling, but
nothing major.
2008-06-07 19:03:45 +00:00
e97909abee
Move away from grep-dctrl. New code in awk is slightly faster, and
...
more robust in cases where tasks are not defined.
2008-06-07 17:03:44 +00:00
2b8dfe453a
make sure the packages are sorted appropriately
2008-06-07 12:05:08 +00:00
6a65e48806
re-indent for consistency
2008-06-07 00:31:58 +00:00
c5e871279b
re-add set -e
2008-06-07 00:27:20 +00:00
d21aa49a4f
* tools/update_tasks: Significant streamlining to make a huge difference in
...
runtime. Now feasible to run this automatically per-build rather than
cronning it.
2008-06-07 00:02:36 +00:00
977746d1c1
Path to sparc daily builds has changed.
2008-06-05 22:45:11 +00:00
6d8c7bfc94
generate_di+k_list: fix logic error in use of codenames
...
When building a CD for e.g. etch using D-I from e.g. sid, the script should
not update debian-installer+kernel-sid but debian-installer+kernel-etch in
tasks. After all, debian-installer+kernel-* contains normal packages, and
not udebs. With this change we no longer have to modify the Debian_<codename>
tasks in such cases.
The generated file should of course have '#include <debian-installer-sid>'.
2008-05-17 16:18:04 +00:00
a3f50b9717
Revert accidentally committed files
2008-05-04 18:01:58 +00:00
3146f1e1fe
Drop the base-{etch,lenny} tasks files as make_disc_trees.pl already take
...
care of including packages needed by debootstrap.
2008-05-04 17:56:56 +00:00
c580e320e8
Start to add armel support.
2008-05-04 17:38:52 +00:00
f91df1f669
Add support for a split syslinux.cfg file, which will later be provided
...
to support the syslinux vesa menu.
2008-05-01 20:52:03 +00:00
7c095e5768
Fix code that removes Packages entries - need to be paragraph-oriented rather than line-oriented here
2008-04-20 15:31:48 +00:00
72fad7783b
* tools/imagesums: use newer features in latest mkisofs/genisoimage to grab
...
pre-calculated MD5 and SHA1 checksums directly from the jigdo file.
2008-04-20 14:33:19 +00:00
542d5891ad
Revert accidentally committed files
2008-04-11 18:31:44 +00:00
c5cafa1fac
Remove wireless-tools-udeb from the lenny udeb_include files as it is not
...
required for wireless support (see also #474708 ).
2008-04-11 18:23:46 +00:00
8ced9d59fc
Disable the other m68k option
2008-04-01 23:12:40 +00:00
5747f296cb
Temporarily disable boot support on problematic arches
2008-03-31 13:04:42 +00:00
f9ca2237ff
Re-split link.pl code out; add_files needs it too
2008-03-24 15:08:58 +00:00
2f46e78135
* Pre-cache apt's package information in large lumps rather than walk
...
through it one package at a time. It's much faster. Closes : #470838
Needs a small re-arrangement: code from tools/add_packages and
tools/link.pl now moves into tools/make_disc_trees.pl
2008-03-20 09:43:22 +00:00
899e449533
Revert accidental commit of new file
2008-03-07 09:29:01 +00:00
559ba5615c
Ensure that the correct version of the Installation Guide is included
2008-03-07 09:27:39 +00:00
8fd196b6b0
Add new OMIT_DOC_TOOLS option to work with (partial) mirrors lacking the
...
doc and tools directories.
2008-03-05 21:17:42 +00:00
5498cc1e5b
* Temporarily disable boot support for arm CDs - the netwinder images are not
...
being produced at the moment.
2008-03-05 00:14:25 +00:00
09ed2f2196
Fix a bug in start_new_disc - cope with MAXCDS not being set.
2008-03-05 00:04:36 +00:00
35c6eec04a
* Make sure we include grub-pc since it's used when GPT disk label is
...
choosen.
2008-02-14 14:27:03 +00:00
b08293c62d
force including of laptop-detect on first CD
...
Make sure we include laptop-detect on arches that are know to have
laptops. This is currently done for i386, amd64 and powerpc.
2008-02-11 12:58:46 +00:00
a8beab40a3
* start_new_disc: make multi-arch CD/DVDs and CD/DVDs that are not part of a
...
set (e.g. KDE/Xfce CDs) recognizable through info in .disk directory.
2008-01-16 17:04:13 +00:00
4c2837c737
* Significant cleanup of list2cds. Closes : #451237
2008-01-11 01:04:28 +00:00
eeb3b9abfc
Use 'or' instead of '||' when testing result of calls to open (because of precendence rules)
2008-01-05 23:53:27 +00:00
0db7484988
* During installation debootstrap will complain about an invalid Release file
...
if there is no Packages file for the local section. Create an empty Packages
file if one is missing.
2008-01-05 23:50:48 +00:00
a6e1349b01
Minor consistency fix
2008-01-04 23:01:05 +00:00
d07d0ac8af
* Instead of including all alternative dependencies in list2cds, only
...
include the first one. This reduces the size of the netinst and improves
what's included on CD1. Only loss is console-{data,common,tools} so these
are now added in generate_di+k_list.
2008-01-02 21:06:24 +00:00
acc04558ee
* tools/update_tasks: ignore comments and blank lines in tasks.list.
...
* tasks/tasks.list
- add missing l10n tasks: gujarati-desktop, malayalam-desktop, tamil
- comment out l10n tasks for languages not supported in D-I, for
Icelandic, Irish, Serbian, Welsh and Xhosa
2007-12-17 19:59:42 +00:00
ced27feb2f
* Include busybox for architectures that use initramfs-tools; base-installer
...
will try to install it.
2007-12-13 16:32:39 +00:00
bd1da0c827
* boot-{mipsel,sparc}: Parse website directory index case insensitive so
...
that both "<a href=" and "<A HREF=" are recognized.
2007-12-12 00:45:02 +00:00
46a4e3536b
* Add acpi-support-base to generate_di+k_list.
2007-11-18 02:39:28 +00:00
5f4cdb823e
Revert the #410418 since it breaks too many things and to add it major changes will be required, not adding them now
2007-10-30 19:31:19 +00:00
d570bf3ad3
Add the missing ;
2007-10-30 00:56:16 +00:00
8f92855bb7
Fix regressions found on r1475 walking on the queued packages twice
2007-10-29 22:58:25 +00:00
35ef242061
Revert r1475 since it caused regressions. Will get back to it once time permits
2007-10-23 21:08:12 +00:00
e0213e29ca
* Exclude packages and add all task present ones before resolve
...
dependencies, avoiding OR dependencies to take their place and removed
packages dependencies to be included. Closes : #410418 .
2007-09-28 18:41:02 +00:00
c569885764
* Include dmraid deb. Closes : #443991
2007-09-27 17:46:00 +00:00
0cc7cac700
Don't fail if there are no CSS files or image files in data/${CODENAME}
2007-09-26 19:02:26 +00:00
66e79adda2
a new look for README.html - CSS and new graphics
2007-09-25 16:08:49 +00:00
921d112d91
Try again to make lenny/sid i386 builds work again
2007-09-18 09:48:49 +00:00
c81d64da56
* Make daily i386/amd64 lenny builds work again - don't attempt to copy
...
the win32-loader files into place if they don't exist.
2007-09-17 10:52:03 +00:00
f2026f7c5f
* Fix autorun.inf generation when win32-loader is present.
2007-09-13 18:28:21 +00:00
8a0984b325
* Applied patch from Robert Millan <rmh@aybabtu.com> to use win32-loader
...
for autorun when CD is being used on Windows. Closes : #441846 .
2007-09-12 16:31:27 +00:00
23f2e94046
fix bashism
2007-09-10 18:10:16 +00:00
ee4fab7ef8
* Applied patch from Robert Millan <rmh@aybabtu.com> to fix image
...
generation with read-only mirrors. Closes : #441397 .
2007-09-10 17:48:38 +00:00
fbdb7b30fd
* Applied patch from Robert Millan <rmh@aybabtu.com> to integrate
...
win32-loader. Closes : #440220 .
2007-09-10 17:47:16 +00:00
12d15c1a2a
At least somewhat more consistent indentation...
2007-09-02 17:24:04 +00:00
08f297d554
* Disable debugging output in boot scripts.
2007-09-02 17:18:06 +00:00
dd8d42703b
* Check if required base packages might also be supplied by a local
...
repository too, not just the main distribution. Closes : #425600
2007-08-26 15:19:00 +00:00
a10d15179c
* Recompress the Packages files separately just before generating
...
Release files. Closes : #423835 , thanks to fjp for the patch.
2007-08-26 15:07:52 +00:00
2996bf0a1e
Invert the -e test
2007-08-11 23:23:25 +00:00
e53fc89e17
* Temporary fixup for daily lenny sparc builds - use older image locations
...
if new ones not available.
2007-08-11 12:57:12 +00:00
5655b191d5
Further logic fixing in boot-x86: amd64 should now work
2007-08-10 23:44:14 +00:00
c40e37b066
Fix boot-x86 shell syntax so it runs
2007-08-09 21:28:10 +00:00
642626a4be
Merged a patch from Otavio:
...
* Create dpkg status file before calling APT
2007-08-08 12:55:36 +00:00
0454b4c917
Merged in patch from Otavio:
...
* Fix extranonfree support to be backward compatible with previous
behaviour (default to false)
2007-08-08 09:54:04 +00:00
6560eb096d
* Merge boot-i386 and boot-amd64 into boot-x86.
2007-08-02 03:47:50 +00:00
0b03aad504
* Parse isolinux.cfg case-insensatively.
2007-08-02 02:43:19 +00:00
cd50dfba26
* Drop old with26 cruft for lenny.
2007-08-02 02:28:02 +00:00
b770dfe6d2
[ Petter Reinholdtsen ]
...
* Update tools/grab_md5 to use the same variable name (SUITE->CODENAME)
as the rest of the code, to reduse confusion.
2007-07-30 07:36:39 +00:00
79c1614a0a
Use correct version of boot configuration files
2007-07-26 08:18:52 +00:00
7a414b8567
Partial reversion, we can always simplify further later
2007-07-26 01:53:36 +00:00
cb5987f544
- Remove support for sparc32
...
- Structure of D-I images was simplified, so adapt to that
- Fix some broken references to etch in lenny boot-sparc script
- Hope after all this things will still work...
2007-07-26 01:22:33 +00:00
ff146a5d79
Disable sparc32 for Lenny images as it is no longer supported
2007-07-18 07:39:59 +00:00
87b46721b8
Additional HERE command is no longer needed
2007-07-18 02:03:34 +00:00
03a5813d97
Remove obsolete code to include kernel-image packages for powerpc
2007-07-03 09:29:26 +00:00
16d9f6aed9
Revert accidental commit of local changes
2007-06-22 17:10:14 +00:00
f096552f3b
Fix indentation
2007-06-22 15:18:10 +00:00
febd6c144e
weird props problem
2007-06-22 14:54:50 +00:00
52ca77be04
* Fix for multi-arch CDs including source - the extranonfree update
...
broke the source output
2007-06-22 14:49:17 +00:00
8fad42f5fd
* Fix for multi-arch CDs including source - the extranonfree update
...
broke the source output
2007-06-22 14:42:43 +00:00
55fb140b7c
Minor update for local support
2007-05-12 01:35:39 +00:00
9c78119a6c
Try a more flexible approach for local debs
2007-05-12 01:28:47 +00:00
2fae5806e9
* Don't hack with the Release file unless EARLY_BUILD_HACK=1.
...
Closes : #423463
2007-05-12 00:33:34 +00:00
fdb006760d
Dann Frazier has taken over from Jeff Bailey for daily IA64 D-I builds
2007-05-03 22:00:21 +00:00
0d3c11551e
* It seems the changes for 3.0.0 completely broke extranonfree
...
support. Re-add it.
2007-04-19 23:38:29 +00:00
8a277132e8
* Removed m68k from the list of arches in generate_di+k_list and
...
generate_di_list to reduce warnings.
2007-04-10 23:44:56 +00:00
fff66f0336
- Also export COMPLETE for use in the README file template
...
- Clean up: remove files for potato and woody release
2007-04-10 23:31:01 +00:00
09e495846f
* Copied etch files to lenny ready for the new testing work.
2007-04-10 23:21:31 +00:00
fa2c4bcc52
* Add some munging on the Release files if we're not building
...
for "testing". Used in the etch release, and I'll back it out shortly.
2007-04-07 11:34:51 +00:00
ab7e1d0171
In list2cds, don't add udebs in the final COMPLETE run - they're no
...
use there.
2007-04-06 18:23:14 +00:00
b695b182c4
* In start_new_disc, cope with $DEBVERSION containing spaces
...
* Only put the release notes and installation guide on disc#1
2007-04-04 16:40:18 +00:00
64bd969a0c
* Fix up boot-alpha to calculate the size of the ramdisk needed, rather
...
than hard-coding to 16384. Also slight refactoring.
2007-03-20 01:01:16 +00:00
a2d50b9f65
* Fix a silly bug in start_new_disc that would break on discs with
...
local packages. Thanks to Ronny Aasen for the patch. Closes : #414818
* Final *final* upload for etch; urgency high to get through the
freeze.
2007-03-13 23:38:53 +00:00
1fc78c6086
* Fix the extra_image() function in both boot-i386 and boot-amd64 to make
...
sure we don't end up overwriting extra images from one arch with those
from the other. Now the multi-arch netinst should work for the installgui
target for both arches
2007-03-13 02:21:13 +00:00
9006e6dd31
* Add the DEFAULT64 handling to boot-amd64 as well as boot-i386; needed
...
in both so that things are setup the same regardless of the order in
which the boot-$arch scripts are called
2007-03-13 01:06:07 +00:00
ec87877896
Fix path for creating splash image in boot-amd64. Closes : #413850 .
2007-03-12 01:33:39 +00:00
46369d0dc5
Disable pattern metacharacters in some regex with included variables.
...
Closes : #413506
2007-03-05 16:09:46 +00:00
7b1b3973f8
* Updated isolinux.bin to the version from syslinux 3.31-3.
...
* Re-enable use of 64 bit detection, fixed now.
2007-03-01 19:18:45 +00:00
2ca98a7f32
* Cope with rolling back more than one package in case we go well
...
over the disc size
* Use a multiplier of 1.2 for HFS space - overkill, but it fixes
the multi-arch DVD overflowing. Also log if we're doing HFS.
* Tweak where we look for s390 boot files to make the weeklies work again.
2007-02-27 20:05:32 +00:00
a2d9587f1a
Don't rely on PATH containing the tools directory.
2007-02-21 14:13:35 +00:00
f47d23be43
* Temporarily disable use of 64 bit detection due to syslinx's bug #410729 .
2007-02-13 01:14:35 +00:00
3d5259c5ef
* Use the 64 bit autodetection feature of syslinux 3.31-2, if available,
...
to default to the 64 bit target in multiarch isos.
2007-02-04 23:41:44 +00:00
06efc9c4d7
Add debug for when get_file_blocks fails
2007-01-22 23:06:30 +00:00
ba8e154a12
* In start_new_disc, make sure that we call the (badly-named) add-bin-doc
...
so that we get README.html and README.txt created even for source discs.
2007-01-02 01:56:44 +00:00
55f4db876a
+ Slightly change the output naming of the disc images to make it safer
...
to produce more then one type of multi-arch disc
2006-12-30 15:13:07 +00:00
c7ece8748b
* Added an update-tasks target to the Makefile and moved the code out of
...
file header comments to there. Fix some bugs in passing.
* List packages for the various specific desktop tasks ahead of the non-key
packages for the general desktop task. Along with changes in tasksel 2.60
this should lead to a generally more useful set of packages on the desktop
CDs; instead of filling up with OOo, it will fill up with things specific
to the desktop environment.
* Updated task lists.
2006-12-29 06:05:30 +00:00
9d376d233e
Re-indent add_packages
2006-12-29 05:57:21 +00:00
17bb18194f
* Re-implemented exclude/unexclude support in make_disc_trees.pl instead
...
of in list2cds. Slight changes in semantics - the new code supports
regular expressions for matching package names (to make it easier to
exclude groups of related packages), and EXCLUDE<m> should be used in
preference to EXCLUDE for packages that are just being shifted to
later in the set by using UNEXCLUDE<n>.
2006-12-29 05:56:43 +00:00
4d4bba1b7e
Don't list the md5sum.txt file inside itself, it will always fail
2006-12-29 02:50:35 +00:00
35743cde5f
As a last-minute step before building images, fill in the TOTALNUM
...
value in the README files in the root of each image.
2006-12-29 02:44:22 +00:00
cccbdd469f
Gunzip the installation manual in .txt and .pdf format, so it's useful
...
on other platforms too.
2006-12-29 01:48:26 +00:00
7af2565ecf
* Add linux-image-2.6-prep for powerpc.
2006-12-29 01:14:28 +00:00
eb1131b3df
Make make_disc_trees.pl and start_new_disc fail better on errors
2006-12-23 03:03:58 +00:00
528c0072f2
remove Suggests on delo - we grab and use the correct version direct
...
from the archive instead these days
2006-12-23 03:02:37 +00:00
342bcac67b
don't suggest binutils-multiarch, we haven't needed that for mipsel CDs since woody
2006-12-23 01:17:47 +00:00
37a2704f3b
Remove scansources ; no longer used
2006-12-23 00:55:48 +00:00
9ae3366b88
Lose the "|| true" when we call boot-$arch; make sure we fail if it fails...
2006-12-23 00:00:36 +00:00
82aa893404
Minor update to boot-sparc
2006-12-22 14:24:28 +00:00
5f185be61f
Removed old "set -x"
2006-12-21 16:19:34 +00:00
4a2a622525
Make the boot scripts more consistent in how they call add_mkisofs_opt
2006-12-21 16:05:32 +00:00
67d9909bbe
Make sure the mkisofs options file goes in the right place
2006-12-21 15:27:50 +00:00
77e3c9015c
Add extra logic to source-tracking code. If we have more than 1 binary
...
arch along with source, there's a chance that the different arches may
have refs to a particular binary package (and hence its source) at
completely different points. Rather than just go with the one we find
first (from the first binary ref), make sure that the source will
match up with the earliest binary record, measured across all arches.
As noticed on the multi-arch DVD; make sure that source:kde-i18n makes
it into the package list before amd64:kde-i18n-ar.
2006-12-21 03:45:01 +00:00
74e9050525
rearrange to make sure is set before we set
2006-12-20 11:02:59 +00:00
4bb6ee2bbe
Always create an empty mkisofs_dirs file for each image; stop warnings about missing files later when we source them in
2006-12-19 17:15:16 +00:00
61c1630ab1
Cosmetic fix - list source in too in debug
2006-12-19 15:57:15 +00:00
b600a32f13
* Update documentation to at least vaguely match how things work.
...
* Added support for hook scripts in a few places around the CD
creation process, to help people customise their CDs. Quite a
lot of refactoring needed in make_disc_trees.pl needed to do that.
* Removed more cruft:
+ old defs in CONF.sh
+ old defs and rules in the Makefile
+ tools/add_secured
2006-12-19 01:58:41 +00:00
7b6988d66d
Make list2cds more verbose in log output, especially when dependencies have failed so a package can't be added
2006-12-18 13:40:53 +00:00
05905f9e37
Better estimation for HFS media (m68k/ppc)
2006-12-12 02:10:53 +00:00
95ffabb409
* Don't put ppc boot files on discs >1.
...
* Add more hfs options to m68k discs, to match ppc.
2006-12-12 02:09:34 +00:00
ad1906c27b
Even more accurate size estimation; reduce how much we need to run mkisofs
2006-12-11 17:52:25 +00:00
8b318a9693
Tweak the size-checking threshold to make things faster
2006-12-11 15:50:49 +00:00
277fc58f3d
When rolling back, cope with package names that are not regexp friendly
2006-12-11 15:47:18 +00:00
e1116e39e4
typo fix
2006-12-10 22:37:38 +00:00
96608804fc
Remove the old shell version of make_disc_trees
...
Missed changing one of the invocations of add_packages - now fixed
2006-12-10 22:36:08 +00:00
52d0a9f08b
Round off the DVD size in blocks
2006-12-10 22:23:51 +00:00
cf079be95b
Re-add the build date to .disk/info, lost in the merge
2006-12-10 21:27:06 +00:00
5b26423869
Minor tweaks for businesscard CDs
2006-12-10 20:12:46 +00:00
7780369fd4
* When we've finished making a CD tree in make_disc_trees.pl,
...
re-compress the gzipped Sources and Packages. Workaround for bug
#402482 in busybox gunzip code.
2006-12-10 20:00:37 +00:00
50058df56f
* Improve performance: rewritten tools/make_disc_trees in perl so we
...
can call add_packages directly as a perl function rather than via
fork/exec all the time. Re-arranged tools/add_packages to make
this work.
* Improved logging in add_packages.
2006-12-10 18:57:29 +00:00
eb73154582
Reimplement make_disc_trees in perl for better performance. More to come...
2006-12-10 15:26:19 +00:00
f6e24e76fa
Cosmetic changes to listcds
2006-12-10 15:13:12 +00:00
60eef836ce
* Lower-case package names at various points to work around apt bug
...
#402354 . Fixes the long-standing warnings from list2cds about "Use
of uninitialized value in string comparison", and allows some poor
packages to make it onto CDs for the first time...
2006-12-10 02:18:28 +00:00
b9280f8c80
* Add Packages and Sources files to the Release file; clean up the
...
checksums. Closes : #402267
2006-12-09 22:31:23 +00:00
44b17db956
Don't check source-only discs for installability of base
2006-12-08 16:00:36 +00:00
d3aa586a36
Fix simple cut-n-paste error
2006-12-08 13:55:52 +00:00
7c746a97e9
Slightly cleaner handling of mkisofs_opts and _dirs
2006-12-08 12:17:24 +00:00
e9be1e7c20
Make the FAQ extraction not be verbose
2006-12-08 11:56:52 +00:00
2d1735aa21
Make sure we use the specified mkisofs in make_disc_trees
...
Make the missing-base-files debootstrap errors less scary-looking
2006-12-08 09:46:18 +00:00
73f3f85b6b
Match *CD rather than CD for the 650MB image size, so the KDE builds work
2006-12-08 00:48:08 +00:00
634682f779
Fixing oversights from the big merge
2006-12-07 23:51:14 +00:00
a269a8fd4c
Merge of changes from Steve's development branch to take us to
...
debian-cd version 3.0.0. Highlights:
* Support now added for multi-arch CDs/DVDs, including mixed
binary/source discs. Multi-arch discs should be bootable on those
multiple arches, modulo boot-sector clashes. Extra support added
in boot-i386 and boot-amd64 to make the 2 main arches happily
co-exist.
* Disc sizing is now much more intelligent - sizes are defined
depending on the disk type chosen at the start, and discs are now
filled exactly to those sizes while files are added rather than
the old up-front guessing method. Equally, the metadata on the
disc (Packages, Packages.gz, Sources, Sources.gz, md5sums.txt) is
generated as much as possible while this is happening to make the
sizing code incredibly accurate. Using this method of disc sizing
means that customising discs should be much easier/safer - either
add custom contents at the start and debian-cd will fill the
remainder of the disc, or afterwards roll back the packages on the
disc and add extras later.
* Source is now treated as (almost) just another arch, with most of
the special casing for source hidden internally. If asking for
source-only discs, they will simply be built using all the
available sources. If combined with other arches, the sources will
automatically be chosen to match the binary packages. Meeting GPL
requirements was never so easy!
* Removed lots of old cruft to clean up the codebase:
+ non-US support
+ woody support
+ lots of old support scripts that have been made redundant
+ significantly simpler Makefile, much easier to follow
+ old boot-$ARCH.calc files for estimating boot-file sizes are now
(obviously) obsolete and therefore gone
2006-12-07 23:09:01 +00:00
5f62118c2c
Daily builds for amd64 now done by Andreas Barth; with thanks to Kurt Roeckx
2006-12-07 01:01:01 +00:00
4c83b14ad9
Fix md5sum file format
2006-12-05 17:52:07 +00:00
a689886868
Fix typo bug, improve error handling
2006-12-04 17:23:57 +00:00
7a843520eb
* Include prep support on powerpc images again.
2006-12-04 10:30:40 +00:00
82d1b005fc
* tools/generate_di+k_list: no longer include kernel-image packages for
...
powerpc as we don't support 2.4 based installs anymore. Closes #401429 .
2006-12-03 19:11:45 +00:00
a12fe9fd65
Minor cleanup of the image sums stuff
2006-12-03 16:40:12 +00:00
93fe864b6f
* Another devel branch merge: Change tools/grab_md5 to also look for
...
md5sums in the installer suite as well as the archive suite in
case they're different. Also removed old woody support, to clean
up the code a little. Updated Makefile and update-cd to match the
command-line interface change.
2006-11-30 22:13:42 +00:00
a46520a7fd
Remove sh from the arch list in generate_di_list, to make builds quieter
2006-11-30 21:50:29 +00:00
ff845c2120
* Dump the mkisofs command-line used for each CD into .disk/mkisofs
...
as we make it. Closes : #258099
2006-11-28 00:19:55 +00:00
4ded5ac8d9
* Add bpalogin near the top of the task list, as requested a long time
...
ago. Closes : #231583
2006-11-27 23:46:07 +00:00
27f9fc5ef5
s/raw/iso/
2006-11-27 17:03:22 +00:00
3f2f6c11e3
Don't attempt to make ppc CDs bootable after #1
2006-11-27 09:43:10 +00:00
9b44f8f3e0
Fix f1.txt mods - only apply on CD1
2006-11-27 09:36:49 +00:00
4c31948c4b
Quick fix
2006-11-27 04:16:52 +00:00
1586e5757b
Try again on .disk/cd_type
2006-11-27 03:22:34 +00:00
42583ba7b4
* Stop using the silly .raw extension for output images, use .iso instead
...
* Improve support for different disk types. Specify DISKTYPE in CONF.sh,
and it will affect both the output name later (so it's now possible to
distinguish between CDs and DVDs). Defaults to CD if not otherwise
set. DISKTYPE will be used more in the future for sizing too, but that
merge can wait a while longer yet. Closes : #361422
* Use DISKTYPE and COMPLETE values to create the file .disk/cd_type for
the installer to use.
2006-11-27 03:19:31 +00:00
38aa21763a
* DEVEL BRANCH MERGE: Change mkisofs_opts usage: add a shell function
...
for the boot-$arch scripts to use rather than simply appending to the
$N.mkisofs_opts file directly. Needed for forthcoming multi-arch
support.
2006-11-27 02:15:29 +00:00
89235c1124
Try again for dates
2006-11-26 22:53:28 +00:00
6f101339c8
Add the build date/time into a few more places so people can see them
...
more easily; add the build time into the .disk/info file.
2006-11-26 22:42:02 +00:00
40c9c0b3d0
Typo fix
2006-11-25 03:20:51 +00:00
04dcde6a8b
* Split final md5sum of images out from Makefile into tools/imagesums;
...
if we've made jigdo files then *don't* waste time running md5sum on
the images as well!
2006-11-25 02:08:38 +00:00
9924a80b78
* Include floppy disk images again for i386.
2006-11-23 00:42:39 +00:00
3e59b569ea
Current values
2006-11-17 00:35:50 +00:00
2a9dbeb4d8
* Include "tape" images again for S/390.
2006-11-02 07:21:58 +00:00
b5de101510
Current boot- sizes
2006-10-31 00:06:55 +00:00
8e15dce126
tools/generate_di+k_list: add new required packages for arm
2006-10-28 19:51:11 +00:00
6813379884
- tasks/exclude-etch: clean out obsolete entries
...
- tools/generate_di+k_list: generic suffix was dropped for amd64 kernels
2006-10-28 16:45:07 +00:00
ddf215a939
Also remove no longer needed boot parameters for hppa
2006-10-22 22:42:44 +00:00
de0e745535
* Increase alpha hardcoded ramdisk_size to 20 mb, 16 is too small now.
2006-10-22 22:23:56 +00:00
0ca08661f4
* Include brltty in generate_di+k_list.
2006-10-21 19:26:58 +00:00
4a6935c1d3
* Merge patch from Petter to allow override of the default boot choice
...
in syslinux using the ISOLINUX_DEFAULT config option. Closes : #393229
2006-10-18 20:47:32 +00:00
af5b09d42d
* Remove 2.2 kernel for mac from generate_di+k_list, as it's no longer in
...
the archive.
2006-10-16 18:10:18 +00:00
2a8a711c0e
* Remove 2.4 kernels from generate_di+k_list for i386.
2006-10-16 17:57:29 +00:00
99ca059cfa
[ Petter Reinholdtsen ]
...
* Update tools/boot/*/boot-amd64 to use the correct isolinux
splash image settings, and to insert $KERNEL_PARAMS correctly into
isolinux.cfg. Based on patches already implemented in boot-i386.
2006-10-15 16:44:41 +00:00
5a80e07493
* Fix KERNEL_PARAM breakage. Thanks to Vagrant Cascadian for the patch,
...
closes : #387255
2006-10-08 11:25:42 +00:00
9bb616bedf
Minor changes to README.html.in and generation of README.html: cope
...
with unofficial, official beta and official release CDs better. Let's
not repeat the sarge mistake. Closes : #312604
2006-10-05 23:08:09 +00:00
3e5007f99c
Avoid hardcoded path introduced by mistake.
2006-09-26 16:35:20 +00:00
97739af224
* Applied patches that are being in use at O.S. Systems and that are
...
useful to others:
- allow to use different name for final iso image;
- allow to set the script to be used in debootstrap to check if all
base need package are present;
2006-09-18 12:29:57 +00:00
277eecc730
* Remove init=/linuxrc from hppa.
2006-09-15 09:07:20 +00:00
13b0587c4d
Include CD number in the fill level markers.
2006-09-02 10:57:48 +00:00
758e9dc0bb
* Correct splash screen generation for sarge and etch, making sure the
...
correct background colour (black) is selected.
2006-09-02 10:56:44 +00:00
83af20b93f
cope with powerpc cdrom -> cdrom64 change
2006-08-29 14:09:19 +00:00
4110d78b3e
move an echo around
2006-08-24 18:52:10 +00:00
3eeab7dca4
* On sparc, include libc6-sparcv9 and libc6-sparcv9b, which base-installer
...
will also pull in.
2006-08-22 21:59:04 +00:00
222d4e2341
* Include libc6-i686 in generate_di+k_list, base-installer will
...
soon begin installing this onto machines that can use it.
(To regain some space, libc6-amd64 will soon stop being standard priority,
and drop off.)
2006-08-22 21:47:28 +00:00
5d2516c0cd
Try to fix the "unofficial development version" bug on official CDs.
2006-08-20 22:31:19 +00:00
b500a9670e
[ Petter Reinholdtsen ]
...
* Add more features to get_diskusage.pl, making it easier to track
dependencies and rejected packages.
2006-08-10 11:17:02 +00:00
3bce5ff176
Handle packages without new dependencies too.
2006-08-07 08:54:56 +00:00
fb0991bf79
Add support for listing dependencies.
2006-08-06 11:14:18 +00:00
3a1e680fb8
Rewrite to handle more CDs, and to list the udebs too.
2006-08-06 10:54:44 +00:00
139811b42b
Update generate_di+k_list to include libdiscover1
2006-08-02 14:55:28 +00:00
de589d8eec
Update generate_di+k_list to include libsysfs2
2006-08-02 00:10:07 +00:00
73f2664cec
Disable el-torito boot image for i386
2006-07-30 13:00:57 +00:00
2e0f6ffcca
Exclude floppy and el-torito images for i386 as they are not being built
2006-07-29 21:09:05 +00:00
7c7e23faf9
Make sure that we also actually take 2.6 kernel images if DI_DIR is set
2006-07-29 20:03:50 +00:00
452b0ec0a6
There are no tape images with 2.6.16 for S/390
2006-07-29 19:11:12 +00:00
ed1abc0ee4
* Mips has dropped r5k-ip22 kernels and gained r5k-ip32. And r5k-ip32
...
doesn't have CD boot support yet, so don't attempt to use the cdrom
boot image.
2006-07-28 22:35:14 +00:00
7bde597d14
Mips has dropped r5k-ip22 kernels and gained r5k-ip32
2006-07-28 21:18:49 +00:00
7a307f7706
No initramfs generator needed for mips, mipsel and m68k
2006-07-28 00:13:50 +00:00
325d409eea
* Switch from 2.4 to 2.6 kernels for arm, mips and mipsel
...
* Switch from yaird over to initramfs-tools (same arches)
* Much simplified generate_di+k_list - mips and mipsel don't need script
fragments any more
* Added elilo for i386
2006-07-27 23:58:59 +00:00
4dca488b28
- Drop initrd-tools for ia64, powerpc and sparc
...
- Include initramfs-tools instead of yaird for ia64 and sparc
2006-07-27 23:46:03 +00:00
b29a593a51
- Update to libdevmapper1.02
...
- No need to include yaird for m68k
2006-07-27 23:40:27 +00:00
2089c7922a
Include only 2.6 kernel images for sparc
2006-07-27 23:36:42 +00:00
fa8a2837be
Drop 2.4 support for sparc64; switch from 2.4 to 2.6 for sparc32
2006-07-27 10:25:48 +00:00
45ac515723
Give daily builds for i386 back to Joey
2006-07-23 17:38:16 +00:00
d9d9e45386
Temporarily take over i386 daily builds
2006-07-17 09:29:14 +00:00
6064831747
Add cryptsetup to first CD; needed for installations using encrypted partitions
2006-07-16 18:30:28 +00:00
4d1c833324
Improved debug
2006-07-03 14:45:32 +00:00
c48ee7153e
Add debug output to help work out which images we're using
...
Fix boot-amd64 to find the daily image files correctly
2006-07-03 14:39:16 +00:00
22fbd311c0
Syncing changes back from the build machine
2006-07-03 14:00:34 +00:00
fd5997614f
Sync some changes in from the build machine
2006-07-03 13:59:09 +00:00
f4277b2348
AMD64 d-i images are now available from people.d.o
2006-07-02 22:14:37 +00:00
b5336e8ec2
* Add 686 kernels, since the netinst CD is much larger and can now easily
...
fit them and this makes the CD much more attractive for many users.
2006-07-01 23:12:59 +00:00
ba45622865
Fix URL to powerpc images
2006-06-24 12:31:04 +00:00
20434539ca
Wouter Verhelst has taken over daily d-i builds for powerpc
2006-06-23 20:50:42 +00:00
a36572ee9e
* Add gtk initrd to amd64 images if available.
...
* Add autorun file to amd64 images if there's a README.html, same as for
i386.
2006-06-15 19:39:41 +00:00
99a1707eb8
* Correct url to the amd64 dailys.
2006-06-15 19:25:33 +00:00
49c338922d
Add extra arm kernels and more utilities into the task lists.
...
Closes : #373225
2006-06-15 00:00:08 +00:00
cb36cebc21
Closes : #327470
...
* Applied patch from smarenka to add 2.6 kernels for m68k, also 2.4 kernels
for appropriate m68k subarches, and also emile, amiboot, atari-bootstrap,
and initramfs-tools for m68k.
2006-06-13 21:17:46 +00:00
5c2d0ecb20
* d-i doesn't include bast images anymore, drop from boot-arm.
2006-05-24 18:03:47 +00:00
43ff633c0e
* i386 has stopped building because the el-torito boot images were turned
...
off (due to size issues). Fix this by not failing if the el-torito images
arn't there.
2006-05-24 18:00:58 +00:00
9ce8394fb7
fix copying of image to cd
2006-05-15 22:04:18 +00:00
0bcfa7bdad
remove remaining with* files always
2006-05-15 22:00:57 +00:00
88c8591c95
typo
2006-05-15 00:53:46 +00:00
cbd40e680e
* Add support to boot/etch/boot-i386 for adding gtk images. If the
...
isolinux files include .with26+gtk, include gtk initrd along with the
2.4 kernel. If .withgtk, include gtk initrd along with the default
(presumably 2.6) kernel.
untested!!
2006-05-14 17:27:44 +00:00
42f5f35980
* Add sudo to generate_di+k_list, it's needed for installs w/o a root user.
2006-05-12 05:54:08 +00:00
9d6a6006e7
* ths has taken over mipsel builds
2006-05-10 20:08:42 +00:00
78966b6bde
* Fix to tools/grab_md5: reset the file and dir name after each source
...
package is finished with.
* Add extra debug in tools/boot/etch/boot-i386
2006-05-02 21:52:05 +00:00
c017d3cf55
* Only tell mkisofs to use the prep initrd if it's available (which it
...
currently isn't for 2.6.16).
2006-04-27 14:05:22 +00:00
e13e471f6d
Thiemo Seufer has resumed building images for mips
2006-04-23 18:10:53 +00:00
d015fe8754
Revert i386 takeover - Joey is back
2006-04-22 23:59:26 +00:00
c52a1e5ec6
Temporarily take over daily builds for i386 from Joey
2006-04-22 02:17:42 +00:00
0596978928
Colin Watson has taken over daily d-i builds for PowerPC
2006-03-28 16:23:04 +00:00
b4ce9c16a7
Fix to tools/grab_md5: when building the md5-list, DO NOT use the
...
"current" symlink in the d-i directories - that causes jigdo problems
later on. Use the real dirs (as dated) instead.
2006-03-09 01:27:20 +00:00
8881b96fef
Consistently change location for installation guide to /doc/manual on the CD
2006-03-09 01:20:11 +00:00
7980cf50a4
* Remove net-drivers floppy from full CD images.
2006-03-08 18:02:33 +00:00
acc2875c63
generate_di+k_list: add libsysfs1; is not included otherwise because the udeb provides it
2006-03-04 00:54:49 +00:00
a2cec8b9c2
generate_di+k_list: include openssh-server; in installed when network-console is used
2006-03-03 02:35:25 +00:00
3a32a84414
Switch to initramfs-tools by default for netinst CDs for hppa
2006-03-03 02:00:10 +00:00
d056a7b6e5
Mipsel boot images haven't actually moved yet in etch. Cope with this
...
- fall back to the old location if the new one isn't there.
2006-02-28 01:23:18 +00:00
e365484e8b
Kyle McMartin is now taking care of HPPA daily builds
2006-02-15 22:20:09 +00:00
1b6ce3c1eb
* Fix the environment variable checks in tools/generate_di+k_list.
...
* generate_di+k_list: Switch initamfs generator to per-arch,
based on what base-installer installs:
- initramfs-tools on i386, amd64, alpha, powerpc, arm
- yaird on hppa, ia64, mips, mipsel, sparc, m68k
2006-02-12 21:48:18 +00:00
b9ee14bddd
Update the boot-sparc scripts to improve the algorithm for finding the
...
right version of silo to use - grab the filename from the appropriate
Packages file rather than looking in the silo directory in the pool.
2006-02-12 20:53:25 +00:00
d35ef77599
Fix the environment variable checks in tools/generate_di+k_list.
2006-02-11 01:09:11 +00:00
e9d53921b6
* Add linux-image-2.6-footbridge and linux-image-2.6-s3c2410
...
arm kernels as d-i now uses these.
2006-02-09 20:19:29 +00:00
5a3ae483fd
* Switch alpha to 2.6 kernels.
2006-02-09 17:20:11 +00:00
3f38cc069c
tbm has temporarily taken over daily mips builds from ths
2006-02-07 18:40:38 +00:00
839d556954
arm: risc* flavours are no longer built; patch by Martin Michlmayr
2006-02-07 18:34:58 +00:00
f2dbec3701
Add missing envvar checks in tools/generate_di*_list scripts
2006-02-06 11:17:58 +00:00
f4b2eb930f
For etch, pick up the installation guide from the appropriate package
...
in the archive rather than from the d-i area.
2006-02-06 00:38:13 +00:00
576e35c431
Add an initial copy of boot-amd64.calc for etch
2006-02-05 02:09:42 +00:00
9f75f53cd8
Cope better with badly-formatted stanzas in Sources.gz
2006-01-28 20:10:51 +00:00
361b828546
Typo fixes
2006-01-25 21:44:48 +00:00
847cb4dcdf
Make sure that all the scripts use Packages.gz rather than Packages
...
when looking up metadata in the archive - Packages is deprecated.
2006-01-25 21:08:05 +00:00
353288125b
Revert a mistaken checkin
2006-01-24 14:51:19 +00:00
f7a94acfc8
Cope with mipsel boot images moving location. Closes : #349563
2006-01-24 00:08:23 +00:00
1f3bfc2efd
Fix for non-working source builds - $MIRROR/indices layout has changed
...
slightly. Copy it recursively, and flatten symlinks to cope.
2006-01-18 20:51:24 +00:00
4638e4749e
* Deal with 386 -> 486 name change in kernel images.
...
* Exclude ttf-cjk-compact-udeb.
2006-01-07 21:57:58 +00:00
a408da1a54
* Drop floppies from i386 netinst and businesscard; this will make the
...
netinst small enough to fit on 128 mb usb keychains again.
2005-12-28 18:07:01 +00:00
de41c37d83
* Remove iso-codes from netinst, not used.
2005-12-27 05:35:34 +00:00
06b686b303
* Audited all the apt-install commands in d-i, and added these packages
...
to generate_di+k_list: pcmciautils, dosfsutils (barely needed),
udev, installation-report, palo, elilo, sibyl, sibyl, colo, powerpc-utils,
silo, vmelilo.
Some of the bootloaders were alredy included via debootstrap, but as they
are being removed from there, it's better to add them explicitly here.
2005-12-27 05:18:42 +00:00
3f14e1bb2f
* Remove lvm10 from generate_di+k_list, d-i uses lvm2 now.
2005-12-27 04:39:32 +00:00
773b972935
Fix the "shortinfo" output in jigdo files
2005-12-18 19:34:35 +00:00
b9dab72c03
Use "|" rather than "/" as a sed separator in the etch boot-amd64 and
...
boot-i386 scripts. Closes : #342344
2005-12-17 17:53:52 +00:00
5e5a31750c
Set boot-s390 script executable
2005-12-15 22:24:34 +00:00
9faa83afcf
Fix the new Packages file generation to cope with LOCAL packages
...
too. A simple change to add checking for /local/ ; hopefully it will
do the trick.
2005-12-14 01:38:40 +00:00
2358dd635e
* MAJOR CHANGE: Stop using apt-ftparchive to generate the Packages
...
files on each CD/DVD; instead grab the details for each package
directly from the Packages file in the archive. MUCH MUCH faster,
and uses less code too. Affected scripts:
+ tools/scanpackages now just generates Release files. argv[1] used
to be "scan" or "install", but no longer used
+ tools/add_debs slightly simplified - old code removed
+ tools/add_packages now dumps out Packages file fragments as each
.deb and .udeb is copied into the temporary trees
+ WARNING: Any uses of the "before-scanpackages" hook may now break
- shout if you're affected.
2005-12-13 02:04:33 +00:00
b10be4a9dc
Fixed shell bug in DOJIGDO=1 mode, should now work...
2005-12-12 01:12:28 +00:00
c275d5187d
* Split out the code that copies debs into the temporary trees and
...
creates Packages files from the Makefile into tools/add_debs
* Split out the code that copies sources into the temporary trees and
creates Sources files from the Makefile into tools/add_source_packages
2005-12-11 00:39:10 +00:00
1a4ac2ddc6
* Explicitly list ppp and pppoeconf in generate_d-i+k_list, since they are
...
not installed by debootstrap and we do want them on netinst CDs.
2005-12-09 21:40:39 +00:00
5e16cfe7f9
Quote the params to make_image to make sure they work...
2005-12-08 23:46:42 +00:00
1f19193d3c
Split out the actual ISO/jigdo creation code from the Makefile into
...
tools/make_image
2005-12-08 22:55:19 +00:00
70605c7b44
Fix the code to find the kernel(s) for HPPA; JTE wants the path
...
relative to the root of the CD, not the absolute path on the host
filesystem.
2005-12-08 01:33:17 +00:00
e056559b50
Add execute bits
2005-12-07 00:37:59 +00:00
d137795c8d
Adding two new helper scripts needed for JTE changes
2005-12-07 00:21:22 +00:00
2c24d679d4
Merging JTE support into the trunk now that the Debian mkisofs package
...
has JTE included by default.
2005-12-07 00:08:57 +00:00
f62738c8b7
* Add initramfs-tools to generate_d-i+k_list
2005-11-17 00:22:24 +00:00
9cdcac51c3
* Exclude cdebconf from CD1s to prevent both it and debconf being pulled in
...
by | dependencies. cdebconf isn't usable right now and has a large
dependency chain.
2005-11-13 20:36:11 +00:00
cdb7de17bd
* Try forcing debconf onto CDs to attempt to get debian-cd not to include
...
both it and cdebconf for | dependencies. cdebconf isn't usable right now
and has a large dependency chain.
2005-11-13 20:16:56 +00:00
d007076ebf
on second thought, acpi is not very important
2005-11-11 18:34:51 +00:00
505aadb49a
* Add acpi and acpid to generate_di+k_list so they're on the netinst.
2005-11-11 18:28:47 +00:00
d51c1b263c
For full CD/DVD builds, check that we have an "extra" override
...
containing task info. If not, use the sid override instead.
2005-11-10 00:50:19 +00:00
7017915ecf
* generate_di+k_list: Add hfsutils for powerpc; it's no longer in base but
...
yaboot-installer needs it.
2005-11-08 17:32:21 +00:00
ab9a1f6db4
Problem analyzed, so debugging no longer needed
2005-10-31 16:22:02 +00:00
b7c085427d
Debug why daily m68k builds are not build from smarenka's home; will revert tomorrow
2005-10-31 15:50:25 +00:00
a365d7c22b
* Don't chmod amiboot if it doesn't exist.
2005-10-31 15:20:27 +00:00
f315aecc40
use $DI_CODENAME in boot-powerpc rather than hardcoding sarge/etch
2005-10-18 08:27:19 +00:00
d44ee5d938
Apply patch from Bdale to make CD building work correctly on HPPA.
2005-09-29 08:01:49 +00:00
9fdb678d8b
Copied Richard Hirst's hppa ramdisk size fix for sarge as well as etch
2005-09-26 21:25:25 +00:00
c2df2f7c1e
- Fix ramdisk_size value for hppa
2005-09-21 07:32:45 +00:00
3adf94038b
Readded the bitness thingy, which got lost before i had svn access.
2005-09-20 17:26:10 +00:00
5aaa17f9fc
Better fix, which doesn't go over the net.
2005-09-20 15:10:06 +00:00
25b483599a
Now test not only if $DI_DIR is not empty, but also if it is a real dir.
...
This was not the case in the powerpc builds, and thus the build failed.
2005-09-20 14:55:36 +00:00
75b9f25cc5
Added set -x to actually provide some visible info in the log about what is happening. Hopefully it will work this time.
2005-09-20 12:15:50 +00:00
86b020552d
Little fix committed for Sven Luther.
2005-09-19 14:12:28 +00:00
46f282657d
second half of sven's patch
2005-09-17 17:05:27 +00:00
8a87eea9f2
even more hardcoded path sillyness
2005-09-14 21:00:38 +00:00
e7ba4d71f9
* generate_di+k_list: Add some mips and mipsel subarches that are new in
...
etch or were missing before.
* generate_di+k_list: Use kernel-image-2.4-<subarch> and
linux-image-2.4-<subarch> packages for as many architectures as we can,
instead of enumerating the versions of the kernels to include. Much
cleaner and more robust and will make d-i more robust as well.
2005-09-14 20:52:48 +00:00
31c9a29551
* generate_di+k_list: Deal with kernel package name change. All arches
...
with 2.6 kernels will now include only linux-image packages.
2005-09-14 20:06:12 +00:00
c55c1cc139
* Since debootstrap is in sbin, add sbin to PATH.
...
* Remove other random hadcoded paths to programs in bin.
2005-09-14 18:28:10 +00:00
fc0ae496b1
* Applied patch from Sven Luther which adds powerpc64 kernels to
...
the CDs, and adds IBM chrp boot files. Closes : #328274
* Remove Debian_sid task, which dates from before woody and should not be
used.
2005-09-14 17:55:39 +00:00
34df7ddf4e
fix sid symlinks, and begin versioning in svn
2005-09-07 15:21:11 +00:00
10f1ae01cc
Update for Sparc:
...
- sparc64: switch to 2.6.12 kernel; make CD multiboot 2.6 and 2.4,
using 2.6.12 by default
- sparc32: drop 2.6 kernel support as it has no 2.6.12 kernel
- restructure silo.conf with proper support for install, expert and
rescue boot options
2005-09-05 21:05:05 +00:00
2e38d856fa
- Applied s390 boot support patch by Frans Pop. Closes : #318021
2005-08-08 17:51:56 +00:00
97a1836833
- Switch mipsel to use my builds.
2005-08-04 05:54:00 +00:00
2d7658bac7
- Use isolinux config files included in the d-i debian-cd_info tarball
...
so it does not need to be maintained in both places.
2005-07-08 09:22:27 +00:00
433894c716
please limit pointless debugging messages to English. :-P
2005-07-08 09:12:12 +00:00
73a4345271
- Completed access cd-drivers transition.
...
- d-i renamed syslinux.txt to boot.txt, us new name instead of
renaming file from d-i.
2005-07-08 08:07:22 +00:00
f5a7063347
m68k etch updates
2005-06-29 12:41:28 +00:00
99c25d14a8
Revert the sarge Release file hack
2005-06-22 21:33:23 +00:00
f82f3649ac
handle etch changes in d-i
2005-06-15 12:29:25 +00:00
d51a2cabd4
- Synced up all sarge changes to etch.
2005-06-10 21:45:45 +00:00
bd4c11e6f3
Added tools/dedicated_source: simple script used to add extra source
...
packages onto _binary_ CDs. Used for the amd64 sarge release so far.
2005-06-09 10:56:32 +00:00
a809e2abdc
Added tools/sarge/upgrade-hppa.sh and tools/sarge/upgrade-sparc.sh to
...
install the upgrade-kernel bits on CD#1
2005-06-05 01:21:39 +00:00
bc29265c97
Made list2cds more verbose
2005-06-05 00:13:18 +00:00
a7e702d77a
Remove the kernel-headers packages from the task list for all but
...
i386/amd64, reverting the previous change. Several other arches didn't fit.
2005-06-04 21:51:04 +00:00
388284a8c5
Updated tools/add-bin-doc to stop warnings when generating README.html
...
Re-add the kernel-headers packages to match kernel images.
2005-06-04 19:31:27 +00:00
74ed0539fd
Multiple changes before final release:
...
* Add release notes to CD#1 on full CD/DVD sets, and link them from
README.html
* Tweak the generated Release files to be "stable" rather than
"testing"
* Added Sven's patch: a pegasos forth boot script
2005-06-04 14:36:59 +00:00
d90f6e41f4
Allow the usage of a local mirror of the daily d-i builds to be used
...
for sid_d-i builds.
2005-05-26 17:56:34 +00:00
8750bd86df
Fixes for task branching coherency.
2005-05-26 17:55:13 +00:00
f9b1bc58d4
More fixes for the tasks branching.
2005-05-19 21:32:58 +00:00
90f70662a9
Couple of small fixes for joeyh's and my latest commits.
2005-05-18 21:45:47 +00:00
d3ab791cdb
Port to etch previous changes I commited for sarge.
2005-05-17 16:08:15 +00:00
34220d8a54
Add some amd64 patches from Goswin that fix boot-amd64 and missing packages.
2005-05-17 11:49:25 +00:00
8a8cc186cb
Add autorun capabilities to i386 cds
2005-05-17 09:55:36 +00:00
f029f6e6e6
Allow the usage of a local mirror of the daily d-i builds to be used
...
for sid_d-i builds.
2005-05-17 09:47:34 +00:00
dab6547bfa
- debian-installer task files renamed to include distro name and branched
...
for etch.
2005-05-15 16:46:50 +00:00
c754493b57
Don't copy boot.img.gz onto amd64 CD1
2005-05-11 22:10:10 +00:00
15be267e26
- Add support for f4.txt that is for systems with the 2.6 kernel.
2005-05-06 18:47:45 +00:00
14988d1047
Add etch stuff. Mostly copied unchanged from sarge, with light edits.
...
Only enable the rescue isolinux targets for etch.
I hope at least some of the etch stuff (like tools/boot/etch) can be used
for the daily CD builds that build using d-i daily builds.
2005-05-05 16:15:44 +00:00
b49bfbf516
- Add rescue stanzas to isolinux.cfg. Rescue mode is supported in
...
post-sarge d-i images only, but I guess it won't hurt to have the
stanzas there even for sarge images. We may add rescue mode in r1
or something even..
2005-05-04 18:20:17 +00:00
0359eee355
Don't copy the whole d-i cdrom directory onto CD1 for amd64.
...
Closes : #306926
2005-05-01 17:20:06 +00:00
f052e56e2a
Make woody's post-boot-mipsel script cope with extra fields in the
...
output of sarge's isoinfo
2005-04-18 00:00:06 +00:00
2d8b715b82
sparc daily build moved
2005-03-20 20:09:34 +00:00
55e75ba6cd
libdevmapper1.00 renamed to libdevmapper1.01, update debian-installer
...
task. Closes : #298724
2005-03-09 18:56:16 +00:00
42a763d6e7
- Add OMIT_MANUAL variable, which can be set to 1 to drop the install
...
manual from small CDs to save space. We will probably be adding several
new translations, and possibly PDFs, and that would use too much space
on the small CDs.
- Also make the README link to the manual on the Debian web site if
OMIT_MANUAL=1.
- Update the README to mention manual translations are available.
2005-03-03 02:03:45 +00:00
6a29900074
- Stop hardcoding sid as the distribution to take the installation manual
...
from, use DI_CODENAME instead.
2005-02-23 19:42:14 +00:00
5a905923ab
Add support for arm to generate_di+k_list.
2005-02-20 23:06:39 +00:00
496b90e673
preferred url for alpha images
2005-02-18 18:15:09 +00:00
f427edbd31
kmuto is now doing arm builds
2005-02-17 07:46:30 +00:00
509a9fe0e0
- Switch mips daily builds to new builds by ths.
2005-01-20 22:34:50 +00:00
553eb21ce6
switch hppa to 2.6.8 kernel version of installer
2005-01-16 04:35:22 +00:00
b01a2e73ba
- Apply patch from bug #258026 .
2005-01-12 16:38:17 +00:00
Raphaël Hertzog
Steve McIntyre
Frans Pop
cd-builder user
Otavio Salvador
Joey Hess
Santiago Garcia Mantinan
Petter Reinholdtsen
Colin Watson
Tollef Fog Heen
Sven Luther
Stephen R. Marenka
Bdale Garbee