Commit Graph

594 Commits

Author SHA1 Message Date
cd-builder user c67c31fc03 Tweak definitions for daily image locations so that the push_di_to_cdbuild script can find them 2010-08-20 15:52:56 +00:00
Steve McIntyre 771f754516 Add support for the kfreebsd ports. Closes: #593629 2010-08-20 15:04:23 +00:00
cd-builder user 5018528099 Fix for the doppelganger patch 2010-07-08 10:23:51 +00:00
Steve McIntyre b5ec72640c Patch from Ian Campbell <ijc@hellion.org.uk>:
Detect duplicates in the extra images used for installation

Several files included under install.{386,amd} are actually identical to
others. Rather than duplicating them attempt to detect this and hardlink
them.

Since images can be downloaded from the web at build time it is not
always possible to detect identical files by looking for the symlinks
created by the debian-installer build. Instead we pass a list of
potential "doppelgangers" to extra_image each of which is checked for
similarity to the new image.

I added gtk/vmlinuz (which is always the same as plain vmlinuz) which
although not necessary makes it more explicit which kernel goes with the
initrd at very little cost.

Hardlinks are used in preference to symlinks since these are expected to
work better with isolinux and the Xen tools.
2010-07-07 23:49:46 +00:00
cd-builder user 370193149e More changes needed for the netinst including firmware. Set up build "C" to work the same as build "2" in most respects. 2010-05-27 13:33:26 +00:00
Frans Pop d961fb7e0e s390: specify offset and size of the initrd for booting from CD
The old setup worked fine with an ext2 initrd but fails with an initramfs,
either because autodetection is different for initramfs or because of kernel
changes (I suspect the first).
This means that booting s390 from CD has not worked since sometime during the
Etch release cycle, even though support for booting from CD was only added
early in that cycle - ouch.

For booting with an initramfs initrd we apparently need to specify its
offset and size at specific memory locations.

Change is based on SuSE's CD boot. Many thanks to Adam Thornton, Mark Post
(of Novell) and Bastian Blank for providing the pointers to the missing bits.

This fixes booting from CD using the d390.ins file; tested in Hercules for
both Lenny (31-bit kernel) and Squeeze (64-bit kernel).
Booting from CD using the d390.tdf file may still be broken (if possible at
all) as I have no idea how to test that.
2009-10-11 18:12:06 +00:00
Raphaël Hertzog d12d861d0d Fix syntax errors in tools/boot/{lenny,squeeze}/boot-m68k (thanks to
lintian).
2009-09-17 14:16:21 +00:00
Raphaël Hertzog d8a3faa32f * Fallback looking for syslinux/silo/yaboot in $CODENAME when $DI_CODENAME
didn't gave any result. This is useful when using partial mirrors built by
  simple-cdd while trying to build a Debian CD using a newer d-i (in my case
  etch CD with lenny d-i).
* Use dpkg --fsys-tarfile instead of ar for extracting files from deb
  packages. The previous invocation could have failed for packages using
  something other than gzip compression.
2009-08-18 15:01:25 +00:00
Frans Pop fe2334131d Add a Xen variant on i386 and amd64
Patch from Ian Campbell.

i386 Xen guests require a PAE (686-bigmem) kernel in order to
run. Therefore this variant includes the relevant installer kernel and
ramdisk in install.386/xen as well as suitable kernel udebs and proper
debs for the installed system.

amd64 Xen has no similar requirement but we include the kernels under
install.amd/xen in order to have a consistent path under both
architectures.
2009-08-09 14:33:00 +00:00
Frans Pop e9c608e6b7 Add support for producing disks with (optional) extra variants
This patch from Ian Cambell adds the generic support code:
   * CONF.sh:		Add $(VARIANTS) configuration variable.
   * eash-build.sh:	Add command line parameter to enable variants.
   * Makefile:		Define VARIANT_xxx when preprocessing package list.
   * boot/?/common.sh:	Add a function for checking if a variant is enabled.
   * generate_di_list: 	Allow variant overrides in udeb exclusion list.

Variant support is documented in docs/README.variants

The intention is to use this support to add support for installing a
Xen guest from an ISO image.

The approach to use varriants was originally suggested by Frans Pop.
2009-08-09 14:32:55 +00:00
Frans Pop bee30ee646 boot-x86: move creation of install.bat out of extra_image
Patch from Ian Campbell.
2009-08-09 14:32:45 +00:00
Frans Pop 276bf8f8ac Don't fetch D-I images for the prep subarchitecture
prep has not been available for a long time.
Thanks to Ian Campbell for pointing that out.
2009-08-07 10:34:15 +00:00
Frans Pop 129713f1b2 Fix syntax error 2009-08-07 10:34:11 +00:00
Frans Pop 83fcacb0f7 Don't download floppy D-I images for i386; they're no longer available 2009-08-04 20:34:23 +00:00
Frans Pop ed19bfa438 Avoid unnecessary download of D-I images for x86 and alpha
Only do boot disk stuff for x86 and alpha if the image is supposed to be
bootable. For i386 and amd64 this avoids downloading D-I images for all
30+ CDs in a full set.
2009-08-04 20:15:32 +00:00
Frans Pop c6e842e393 Display message for unsupported sparc subarchitectures 2009-06-13 14:52:42 +00:00
Frans Pop fc09043feb Better do an explicit check for D-I syslinux config version 2009-05-31 23:53:55 +00:00
Frans Pop 617497fff0 x86: fail build if old syslinux config is detected 2009-05-31 22:45:12 +00:00
Frans Pop ce3806e8af Split out code for workaround for #505243 to x86-desktop function library
Cleans up the main boot-x86 script a bit.
2009-05-31 22:45:09 +00:00
Frans Pop d15cc10746 x86: update syslinux config manipulation for version 2.0
Adjust x86 boot scripts for new version (2.0) of framework in D-I for
creation of syslinux configuration files. Essentially the new version
is a backport of what was already implemented in debian-cd before the
release of Lenny and allows a significant simplification.

There are no significant changes in generated CD/DVD images.
2009-05-31 22:45:05 +00:00
Steve McIntyre d5479c0814 Re-add code to generate install.bat on x86 machines. Thanks to Samuel Thibault
for the patch. Closes: #518807
2009-05-16 19:57:17 +00:00
Luk Claes c875c30056 ia64 dailies moved to d-i.d.o 2009-05-05 21:50:23 +00:00
cd-builder user 5e62e91e68 Re-disable mipsel bootable cd code: it's just failing solidly 2009-04-27 16:14:45 +00:00
Luk Claes ef8a3fd518 Update powerpc dailies to the d-i.debian.org ones 2009-04-26 16:42:22 +00:00
Frans Pop d0bd2117be boot-x86 gets sourced: remove shebang; improve whitespace consistency 2009-04-20 12:11:27 +00:00
Frans Pop 0bf1b210cd boot-x86 gets sourced: remove shebang; improve whitespace consistency 2009-04-20 11:50:42 +00:00
Luk Claes b9730d6ab1 use general path as specific one seems to fail 2009-04-08 20:28:52 +00:00
Steve McIntyre 799a06f4c2 Cope with changes to d-i daily-build mirroring 2009-04-07 23:31:03 +00:00
Luk Claes 2c0136b79f hppa dailies moved to d-i.debian.org 2009-04-07 18:07:04 +00:00
Luk Claes 396633af06 Reenable mipsel with ok from Sledge to find out if it works 2009-04-07 13:52:51 +00:00
Luk Claes 7a2d35f38c Moved some images to d-i.debian.org. 2009-04-07 13:43:59 +00:00
Colin Watson e08830966d Luk Claes has taken over alpha, amd64, mips, and mipsel daily d-i
builds.
2009-03-26 01:54:41 +00:00
Frans Pop 27c98b9a17 Add support for and update to squeeze
The Debian version for squeeze has already been set:
http://lists.debian.org/debian-release/2009/01/msg00682.html
2009-02-15 22:42:47 +00:00
Steve McIntyre 132bae8583 Re-add the tools directory on amd64 and i386 disc #1 2009-02-14 12:16:11 +00:00
Frans Pop 7f320fed82 x86-desktop.sh: improve comment 2009-01-30 05:00:20 +00:00
Frans Pop 69e3f1fa76 Clean up D-I Lenny RC1 compatibility code 2009-01-30 05:00:16 +00:00
Frans Pop 5032d25183 Drop support for ISOLINUX_DEFAULT
This environment variable was used by simple-cdd to force the default
installation option to the graphical installer. Now that we have the
syslinux VESA menu, the option has become rather pointless.

See #512303 for discussion.
2009-01-30 05:00:09 +00:00
Frans Pop 33ec58d1a5 sparc: ensure the default 'install' option also gets KERNEL_PARAMS set
The current code will add KERNEL_PARAMS only for boot options that have
an existing "append=" line, but that leaves the default option without it.
2009-01-20 00:39:09 +00:00
Frans Pop dc3927d14c Add support for a separate 'GNOME desktop environment' CD
This new task is mostly added for completeness. Main difference with
the default task file is that no server tasks are included.
2008-12-05 14:12:32 +00:00
Frans Pop 31e8cfd687 Ensure working boot config for light/all desktops for arches other than x86 2008-12-05 14:12:26 +00:00
Frans Pop 2225676ffe Add support to create an 'all desktops' DVD
Include all four desktop environments supported by tasksel (GNOME, KDE,
LXDE and Xfce).

On x86 also add an option in the isolinux menu (under Advanced options)
to select which DE to install; GNOME remains default.
2008-12-05 14:12:24 +00:00
Frans Pop 5b750a3810 Add support for a 'light desktop environment' CD (LXDE + Xfce)
Supports installation of either an xfce or an lxde desktop environment.
For now use B as identifier for INSTALLER_CD in contrib/testingcds.

Includes a framework to manipulate the isolinux configuration for x86 so
that a user can select which desktop he wishes to install.
2008-12-05 14:12:21 +00:00
Frans Pop 3e2d5841be Avoid build error when building full set of multi-arch i386/amd64 DVDs 2008-12-05 14:12:04 +00:00
Frans Pop c9c4150758 Don't add 'desktop=' to append line in instsel.cfg 2008-12-05 14:11:58 +00:00
Frans Pop 5d95644996 boot-hppa: stop passing redundant boot parameters
With current initramfs support neither root= nor ramdisk_size= are
needed anymore.
2008-12-05 09:08:23 +00:00
Frans Pop ae69a5b14e boot-hppa: support KERNEL_PARAMS
This is mainly to have the desktop= option passed correctly.
Also switch to space separation in -hppa-cmdline for consistency with
other architectures.
2008-12-05 09:08:20 +00:00
Frans Pop 9ed57cc189 Fix x86 m-a breakage in workaround due to file renames 2008-11-26 12:46:58 +00:00
Frans Pop 03adf99b41 Prepare for *text.cfg to *txt.cfg rename by D-I 2008-11-23 21:34:39 +00:00
Steve McIntyre 4c0e41e465 * Add support for tracking which packages we've extracted binaries from,
so that we can archive them (both binaries and sources). If we need
    anything, we will list it in CD$N.pkgs_extracted so that external
    scripts can pick it up and do whatever's needed.
  * Minor changes to the interface of tools/which_deb to accommodate that:
    now just lists the files *within* the mirror; it's up to callers to
    prepend ${MIRROR} as needed.
2008-11-23 18:19:25 +00:00
Frans Pop 16f9407423 Prepare for adamd*.cfg to amdad*.cfg rename by D-I 2008-11-23 11:53:57 +00:00
Frans Pop bc419dbf37 Workaround issue with isolinux on amd64/i386 multi-arch images
Modify the syslinux configuration for amd64/i386 multi-arch images
and use ifcpu64.c32 to autodetect 32/64-bit systems when a user hits
enter from the isolinux help screens.

Based on research done and info provided by Franklin Piat.
2008-11-19 16:08:22 +00:00
Frans Pop 262e02ffca Fix i386/amd64 multi-arch support
Currently the isolinux configuration only gets created correctly if the
two arches are specified in the order "amd64 i386". Change the lenny x86
boot script so it works the other way around too.
2008-11-15 01:08:15 +00:00
Frans Pop a8f0d9d14b Remove remaining remnants of pre-split-config support 2008-11-15 01:08:12 +00:00
Frans Pop 88824982ba Fix error in expansion of %ARCH% variables in D-I image location envvars 2008-11-14 20:14:35 +00:00
Frans Pop 1a47dd2a93 Avoid adding an EOL at the end of f3/f4 syslinux help files 2008-11-13 00:23:16 +00:00
Frans Pop e37c9d5a1f Indentation fix 2008-11-13 00:23:14 +00:00
Frans Pop 5beea509c7 Improve code readability 2008-11-12 20:33:42 +00:00
Frans Pop 747426afb6 More no longer needed compatibility code cleanup 2008-11-12 20:33:39 +00:00
Frans Pop bac7536f0f Clean up no longer needed compatibility code in lenny x86 boot script 2008-11-12 18:06:29 +00:00
Raphaël Hertzog 5aa7863d82 Also extract isolinux.bin from the syslinux package in the case of etch
CD images (since it's no more provided by debian-cd itself).
2008-11-07 16:32:06 +00:00
Raphaël Hertzog 7b28512cf9 Don't try to copy sbm on etch CD images as it got removed. 2008-11-07 15:53:36 +00:00
Frans Pop bb9fad3216 Allow multi-arch builds using D-I images from official mirrors or local D-I images
This is made possible by allowing to include a "%ARCH%" placeholder in the
environment variables DI_WWW_HOME and DI_DIR which is expanded to the correct
value at runtime.

Supported for Etch and later.
2008-10-14 08:22:00 +00:00
Frans Pop 07a91b45e3 Drop support for building Sarge CDs 2008-10-14 08:02:21 +00:00
Steve McIntyre 45617b2d30 * Support KERNEL_PARAMS for powerpc, alpha and sparc (Closes: #416230)
Thanks to Vagrant Cascadian for the patch.
2008-10-12 23:30:19 +00:00
Frans Pop 9202a3e6e8 Also remove advanced syslinux config files for gtk
Note that AFAICT removing these files is unnecessary as they should not
be included in the tarball if the file f3.txt.withgtk is not present.
2008-09-21 22:02:22 +00:00
Frans Pop 1dd8261809 Update for syslinux config file rename in D-I
The files (ad)amd.cfg were renamed to (ad)amdtext.cfg for consistency.
2008-09-21 22:02:10 +00:00
Frans Pop 704a350c35 Make sure directory to unpack syslinux in exists
Also make indentation consistent
2008-09-18 18:26:14 +00:00
Steve McIntyre 3580191792 Remove all mention of sbm; no longer needed 2008-09-16 15:29:55 +00:00
Steve McIntyre 60dbf627e2 * Major licensing problem cleanup: (Closes: #497270)
+ Remove binary blobs from the package; pull those files from the
      .debs in the archive as needed (isolinux.bin, vesamenu.c32)
    + sbm.bin *not* yet worked out, so drop it for now
    + Pull out the code to find the right deb and put it in a new helper
      shell script (tools/which_deb), called from Makefile and boot-* as
      needed.
2008-09-15 23:09:18 +00:00
cd-builder user b598c30a47 * Add the "-joliet-long" option when making images with Joliet names.
Some packages with ridiculously long names are not unique in the
    first 64 characters, so normal Joliet sorting fails.
2008-09-08 21:53:45 +00:00
Steve McIntyre b402ea3ba7 * Applied patch from Robert Millan <rmh@aybabtu.com> to allow choice of
desktop when building for win32-loader. Closes: #491300.
2008-07-29 17:29:32 +00:00
Frans Pop 787f433fe6 Correct location of images for ia64 2008-07-16 20:02:15 +00:00
Frans Pop 311d0a1273 Daily builds for ia64 have moved 2008-07-16 20:02:11 +00:00
Frans Pop 76dab60727 Daily builds for m68k have moved 2008-07-16 20:02:08 +00:00
Steve McIntyre b4fd0dfd9b use isolinux rather than 2008-06-08 22:32:11 +00:00
Steve McIntyre 55bd8d23b1 better anchor for search 2008-06-08 22:17:30 +00:00
Steve McIntyre 83ac3d95a3 Add support for custom kernel params for all isolinux configurations 2008-06-08 22:13:42 +00:00
Joey Hess 977746d1c1 Path to sparc daily builds has changed. 2008-06-05 22:45:11 +00:00
Santiago Garcia Mantinan c580e320e8 Start to add armel support. 2008-05-04 17:38:52 +00:00
Joey Hess f91df1f669 Add support for a split syslinux.cfg file, which will later be provided
to support the syslinux vesa menu.
2008-05-01 20:52:03 +00:00
Steve McIntyre 8ced9d59fc Disable the other m68k option 2008-04-01 23:12:40 +00:00
Steve McIntyre 5747f296cb Temporarily disable boot support on problematic arches 2008-03-31 13:04:42 +00:00
Steve McIntyre 5498cc1e5b * Temporarily disable boot support for arm CDs - the netwinder images are not
being produced at the moment.
2008-03-05 00:14:25 +00:00
Frans Pop bd1da0c827 * boot-{mipsel,sparc}: Parse website directory index case insensitive so
that both "<a href=" and "<A HREF=" are recognized.
2007-12-12 00:45:02 +00:00
Steve McIntyre 921d112d91 Try again to make lenny/sid i386 builds work again 2007-09-18 09:48:49 +00:00
Steve McIntyre c81d64da56 * Make daily i386/amd64 lenny builds work again - don't attempt to copy
the win32-loader files into place if they don't exist.
2007-09-17 10:52:03 +00:00
Otavio Salvador f2026f7c5f * Fix autorun.inf generation when win32-loader is present. 2007-09-13 18:28:21 +00:00
Otavio Salvador 8a0984b325 * Applied patch from Robert Millan <rmh@aybabtu.com> to use win32-loader
for autorun when CD is being used on Windows. Closes: #441846.
2007-09-12 16:31:27 +00:00
Joey Hess 23f2e94046 fix bashism 2007-09-10 18:10:16 +00:00
Otavio Salvador fbdb7b30fd * Applied patch from Robert Millan <rmh@aybabtu.com> to integrate
win32-loader. Closes: #440220.
2007-09-10 17:47:16 +00:00
Frans Pop 08f297d554 * Disable debugging output in boot scripts. 2007-09-02 17:18:06 +00:00
Steve McIntyre 2996bf0a1e Invert the -e test 2007-08-11 23:23:25 +00:00
Steve McIntyre e53fc89e17 * Temporary fixup for daily lenny sparc builds - use older image locations
if new ones not available.
2007-08-11 12:57:12 +00:00
Steve McIntyre 5655b191d5 Further logic fixing in boot-x86: amd64 should now work 2007-08-10 23:44:14 +00:00
Steve McIntyre c40e37b066 Fix boot-x86 shell syntax so it runs 2007-08-09 21:28:10 +00:00
Joey Hess 6560eb096d * Merge boot-i386 and boot-amd64 into boot-x86. 2007-08-02 03:47:50 +00:00
Joey Hess 0b03aad504 * Parse isolinux.cfg case-insensatively. 2007-08-02 02:43:19 +00:00
Joey Hess cd50dfba26 * Drop old with26 cruft for lenny. 2007-08-02 02:28:02 +00:00
Frans Pop 79c1614a0a Use correct version of boot configuration files 2007-07-26 08:18:52 +00:00
Frans Pop 7a414b8567 Partial reversion, we can always simplify further later 2007-07-26 01:53:36 +00:00
Frans Pop cb5987f544 - Remove support for sparc32
- Structure of D-I images was simplified, so adapt to that
- Fix some broken references to etch in lenny boot-sparc script
- Hope after all this things will still work...
2007-07-26 01:22:33 +00:00
Frans Pop ff146a5d79 Disable sparc32 for Lenny images as it is no longer supported 2007-07-18 07:39:59 +00:00
Frans Pop fdb006760d Dann Frazier has taken over from Jeff Bailey for daily IA64 D-I builds 2007-05-03 22:00:21 +00:00
Frans Pop fff66f0336 - Also export COMPLETE for use in the README file template
- Clean up: remove files for potato and woody release
2007-04-10 23:31:01 +00:00
Steve McIntyre 09e495846f * Copied etch files to lenny ready for the new testing work. 2007-04-10 23:21:31 +00:00
Steve McIntyre 64bd969a0c * Fix up boot-alpha to calculate the size of the ramdisk needed, rather
than hard-coding to 16384. Also slight refactoring.
2007-03-20 01:01:16 +00:00
Steve McIntyre 1fc78c6086 * Fix the extra_image() function in both boot-i386 and boot-amd64 to make
sure we don't end up overwriting extra images from one arch with those
    from the other. Now the multi-arch netinst should work for the installgui
    target for both arches
2007-03-13 02:21:13 +00:00
Steve McIntyre 9006e6dd31 * Add the DEFAULT64 handling to boot-amd64 as well as boot-i386; needed
in both so that things are setup the same regardless of the order in
    which the boot-$arch scripts are called
2007-03-13 01:06:07 +00:00
Steve McIntyre ec87877896 Fix path for creating splash image in boot-amd64. Closes: #413850. 2007-03-12 01:33:39 +00:00
Joey Hess 7b1b3973f8 * Updated isolinux.bin to the version from syslinux 3.31-3.
* Re-enable use of 64 bit detection, fixed now.
2007-03-01 19:18:45 +00:00
Steve McIntyre 2ca98a7f32 * Cope with rolling back more than one package in case we go well
over the disc size
  * Use a multiplier of 1.2 for HFS space - overkill, but it fixes
    the multi-arch DVD overflowing. Also log if we're doing HFS.
  * Tweak where we look for s390 boot files to make the weeklies work again.
2007-02-27 20:05:32 +00:00
Joey Hess f47d23be43 * Temporarily disable use of 64 bit detection due to syslinx's bug #410729. 2007-02-13 01:14:35 +00:00
Joey Hess 3d5259c5ef * Use the 64 bit autodetection feature of syslinux 3.31-2, if available,
to default to the 64 bit target in multiarch isos.
2007-02-04 23:41:44 +00:00
Steve McIntyre 528c0072f2 remove Suggests on delo - we grab and use the correct version direct
from the archive instead these days
2006-12-23 03:02:37 +00:00
Steve McIntyre 342bcac67b don't suggest binutils-multiarch, we haven't needed that for mipsel CDs since woody 2006-12-23 01:17:47 +00:00
Steve McIntyre 82aa893404 Minor update to boot-sparc 2006-12-22 14:24:28 +00:00
Steve McIntyre 5f185be61f Removed old "set -x" 2006-12-21 16:19:34 +00:00
Steve McIntyre 4a2a622525 Make the boot scripts more consistent in how they call add_mkisofs_opt 2006-12-21 16:05:32 +00:00
Steve McIntyre 67d9909bbe Make sure the mkisofs options file goes in the right place 2006-12-21 15:27:50 +00:00
Steve McIntyre 95ffabb409 * Don't put ppc boot files on discs >1.
* Add more hfs options to m68k discs, to match ppc.
2006-12-12 02:09:34 +00:00
Steve McIntyre 634682f779 Fixing oversights from the big merge 2006-12-07 23:51:14 +00:00
Steve McIntyre a269a8fd4c Merge of changes from Steve's development branch to take us to
debian-cd version 3.0.0. Highlights:

  * Support now added for multi-arch CDs/DVDs, including mixed
    binary/source discs. Multi-arch discs should be bootable on those
    multiple arches, modulo boot-sector clashes. Extra support added
    in boot-i386 and boot-amd64 to make the 2 main arches happily
    co-exist.

  * Disc sizing is now much more intelligent - sizes are defined
    depending on the disk type chosen at the start, and discs are now
    filled exactly to those sizes while files are added rather than
    the old up-front guessing method. Equally, the metadata on the
    disc (Packages, Packages.gz, Sources, Sources.gz, md5sums.txt) is
    generated as much as possible while this is happening to make the
    sizing code incredibly accurate. Using this method of disc sizing
    means that customising discs should be much easier/safer - either
    add custom contents at the start and debian-cd will fill the
    remainder of the disc, or afterwards roll back the packages on the
    disc and add extras later.

  * Source is now treated as (almost) just another arch, with most of
    the special casing for source hidden internally. If asking for
    source-only discs, they will simply be built using all the
    available sources. If combined with other arches, the sources will
    automatically be chosen to match the binary packages. Meeting GPL
    requirements was never so easy!

  * Removed lots of old cruft to clean up the codebase:
    + non-US support
    + woody support
    + lots of old support scripts that have been made redundant
    + significantly simpler Makefile, much easier to follow
    + old boot-$ARCH.calc files for estimating boot-file sizes are now
      (obviously) obsolete and therefore gone
2006-12-07 23:09:01 +00:00
Frans Pop 5f62118c2c Daily builds for amd64 now done by Andreas Barth; with thanks to Kurt Roeckx 2006-12-07 01:01:01 +00:00
Colin Watson 7a843520eb * Include prep support on powerpc images again. 2006-12-04 10:30:40 +00:00
Steve McIntyre 3f2f6c11e3 Don't attempt to make ppc CDs bootable after #1 2006-11-27 09:43:10 +00:00
Steve McIntyre 9b44f8f3e0 Fix f1.txt mods - only apply on CD1 2006-11-27 09:36:49 +00:00
Steve McIntyre 38aa21763a * DEVEL BRANCH MERGE: Change mkisofs_opts usage: add a shell function
for the boot-$arch scripts to use rather than simply appending to the
    $N.mkisofs_opts file directly. Needed for forthcoming multi-arch
    support.
2006-11-27 02:15:29 +00:00
Steve McIntyre 89235c1124 Try again for dates 2006-11-26 22:53:28 +00:00
Steve McIntyre 6f101339c8 Add the build date/time into a few more places so people can see them
more easily; add the build time into the .disk/info file.
2006-11-26 22:42:02 +00:00
Frans Pop 9924a80b78 * Include floppy disk images again for i386. 2006-11-23 00:42:39 +00:00
Steve McIntyre 3e59b569ea Current values 2006-11-17 00:35:50 +00:00
Frans Pop 2a9dbeb4d8 * Include "tape" images again for S/390. 2006-11-02 07:21:58 +00:00
Steve McIntyre b5de101510 Current boot- sizes 2006-10-31 00:06:55 +00:00
Frans Pop ddf215a939 Also remove no longer needed boot parameters for hppa 2006-10-22 22:42:44 +00:00
Joey Hess de0e745535 * Increase alpha hardcoded ramdisk_size to 20 mb, 16 is too small now. 2006-10-22 22:23:56 +00:00
Steve McIntyre 4a6935c1d3 * Merge patch from Petter to allow override of the default boot choice
in syslinux using the ISOLINUX_DEFAULT config option. Closes: #393229
2006-10-18 20:47:32 +00:00
Petter Reinholdtsen 99ca059cfa [ Petter Reinholdtsen ]
* Update tools/boot/*/boot-amd64 to use the correct isolinux
    splash image settings, and to insert $KERNEL_PARAMS correctly into
    isolinux.cfg.  Based on patches already implemented in boot-i386.
2006-10-15 16:44:41 +00:00
Steve McIntyre 5a80e07493 * Fix KERNEL_PARAM breakage. Thanks to Vagrant Cascadian for the patch,
closes: #387255
2006-10-08 11:25:42 +00:00
Colin Watson 277eecc730 * Remove init=/linuxrc from hppa. 2006-09-15 09:07:20 +00:00
Petter Reinholdtsen 758e9dc0bb * Correct splash screen generation for sarge and etch, making sure the
correct background colour (black) is selected.
2006-09-02 10:56:44 +00:00
Colin Watson 83af20b93f cope with powerpc cdrom -> cdrom64 change 2006-08-29 14:09:19 +00:00
Joey Hess 4110d78b3e move an echo around 2006-08-24 18:52:10 +00:00
Frans Pop 73f2664cec Disable el-torito boot image for i386 2006-07-30 13:00:57 +00:00
Frans Pop 2e0f6ffcca Exclude floppy and el-torito images for i386 as they are not being built 2006-07-29 21:09:05 +00:00
Frans Pop 7c7e23faf9 Make sure that we also actually take 2.6 kernel images if DI_DIR is set 2006-07-29 20:03:50 +00:00
Frans Pop 452b0ec0a6 There are no tape images with 2.6.16 for S/390 2006-07-29 19:11:12 +00:00
Steve McIntyre ed1abc0ee4 * Mips has dropped r5k-ip22 kernels and gained r5k-ip32. And r5k-ip32
doesn't have CD boot support yet, so don't attempt to use the cdrom
    boot image.
2006-07-28 22:35:14 +00:00
Frans Pop 7bde597d14 Mips has dropped r5k-ip22 kernels and gained r5k-ip32 2006-07-28 21:18:49 +00:00
Frans Pop fa8a2837be Drop 2.4 support for sparc64; switch from 2.4 to 2.6 for sparc32 2006-07-27 10:25:48 +00:00
Frans Pop 45ac515723 Give daily builds for i386 back to Joey 2006-07-23 17:38:16 +00:00
Frans Pop d9d9e45386 Temporarily take over i386 daily builds 2006-07-17 09:29:14 +00:00
Steve McIntyre c48ee7153e Add debug output to help work out which images we're using
Fix boot-amd64 to find the daily image files correctly
2006-07-03 14:39:16 +00:00
Steve McIntyre 22fbd311c0 Syncing changes back from the build machine 2006-07-03 14:00:34 +00:00
Steve McIntyre fd5997614f Sync some changes in from the build machine 2006-07-03 13:59:09 +00:00
Frans Pop f4277b2348 AMD64 d-i images are now available from people.d.o 2006-07-02 22:14:37 +00:00
Frans Pop ba45622865 Fix URL to powerpc images 2006-06-24 12:31:04 +00:00
Frans Pop 20434539ca Wouter Verhelst has taken over daily d-i builds for powerpc 2006-06-23 20:50:42 +00:00
Joey Hess a36572ee9e * Add gtk initrd to amd64 images if available.
* Add autorun file to amd64 images if there's a README.html, same as for
  i386.
2006-06-15 19:39:41 +00:00
Joey Hess 99a1707eb8 * Correct url to the amd64 dailys. 2006-06-15 19:25:33 +00:00
Joey Hess 5c2d0ecb20 * d-i doesn't include bast images anymore, drop from boot-arm. 2006-05-24 18:03:47 +00:00
Joey Hess 43ff633c0e * i386 has stopped building because the el-torito boot images were turned
off (due to size issues). Fix this by not failing if the el-torito images
  arn't there.
2006-05-24 18:00:58 +00:00
Joey Hess 9ce8394fb7 fix copying of image to cd 2006-05-15 22:04:18 +00:00
Joey Hess 0bcfa7bdad remove remaining with* files always 2006-05-15 22:00:57 +00:00
Joey Hess 88c8591c95 typo 2006-05-15 00:53:46 +00:00
Joey Hess cbd40e680e * Add support to boot/etch/boot-i386 for adding gtk images. If the
isolinux files include .with26+gtk, include gtk initrd along with the 
    2.4 kernel. If .withgtk, include gtk initrd along with the default 
    (presumably 2.6) kernel.
untested!!
2006-05-14 17:27:44 +00:00
Joey Hess 9d6a6006e7 * ths has taken over mipsel builds 2006-05-10 20:08:42 +00:00
Steve McIntyre 78966b6bde * Fix to tools/grab_md5: reset the file and dir name after each source
package is finished with.
* Add extra debug in tools/boot/etch/boot-i386
2006-05-02 21:52:05 +00:00
Colin Watson c017d3cf55 * Only tell mkisofs to use the prep initrd if it's available (which it
currently isn't for 2.6.16).
2006-04-27 14:05:22 +00:00
Frans Pop e13e471f6d Thiemo Seufer has resumed building images for mips 2006-04-23 18:10:53 +00:00
Frans Pop d015fe8754 Revert i386 takeover - Joey is back 2006-04-22 23:59:26 +00:00
Frans Pop c52a1e5ec6 Temporarily take over daily builds for i386 from Joey 2006-04-22 02:17:42 +00:00
Frans Pop 0596978928 Colin Watson has taken over daily d-i builds for PowerPC 2006-03-28 16:23:04 +00:00
Joey Hess 7980cf50a4 * Remove net-drivers floppy from full CD images. 2006-03-08 18:02:33 +00:00
Steve McIntyre d056a7b6e5 Mipsel boot images haven't actually moved yet in etch. Cope with this
- fall back to the old location if the new one isn't there.
2006-02-28 01:23:18 +00:00
Frans Pop e365484e8b Kyle McMartin is now taking care of HPPA daily builds 2006-02-15 22:20:09 +00:00
Steve McIntyre b9ee14bddd Update the boot-sparc scripts to improve the algorithm for finding the
right version of silo to use - grab the filename from the appropriate
Packages file rather than looking in the silo directory in the pool.
2006-02-12 20:53:25 +00:00
Frans Pop 3f38cc069c tbm has temporarily taken over daily mips builds from ths 2006-02-07 18:40:38 +00:00
Frans Pop 839d556954 arm: risc* flavours are no longer built; patch by Martin Michlmayr 2006-02-07 18:34:58 +00:00
Steve McIntyre 576e35c431 Add an initial copy of boot-amd64.calc for etch 2006-02-05 02:09:42 +00:00
Steve McIntyre f7a94acfc8 Cope with mipsel boot images moving location. Closes: #349563 2006-01-24 00:08:23 +00:00
Joey Hess a408da1a54 * Drop floppies from i386 netinst and businesscard; this will make the
netinst small enough to fit on 128 mb usb keychains again.
2005-12-28 18:07:01 +00:00
Steve McIntyre b9dab72c03 Use "|" rather than "/" as a sed separator in the etch boot-amd64 and
boot-i386 scripts. Closes: #342344
2005-12-17 17:53:52 +00:00
Frans Pop 5e5a31750c Set boot-s390 script executable 2005-12-15 22:24:34 +00:00
Steve McIntyre 70605c7b44 Fix the code to find the kernel(s) for HPPA; JTE wants the path
relative to the root of the CD, not the absolute path on the host
filesystem.
2005-12-08 01:33:17 +00:00
Steve McIntyre 2c24d679d4 Merging JTE support into the trunk now that the Debian mkisofs package
has JTE included by default.
2005-12-07 00:08:57 +00:00
Frans Pop ab9a1f6db4 Problem analyzed, so debugging no longer needed 2005-10-31 16:22:02 +00:00
Frans Pop b7c085427d Debug why daily m68k builds are not build from smarenka's home; will revert tomorrow 2005-10-31 15:50:25 +00:00
Joey Hess a365d7c22b * Don't chmod amiboot if it doesn't exist. 2005-10-31 15:20:27 +00:00
Colin Watson f315aecc40 use $DI_CODENAME in boot-powerpc rather than hardcoding sarge/etch 2005-10-18 08:27:19 +00:00
Tollef Fog Heen d44ee5d938 Apply patch from Bdale to make CD building work correctly on HPPA. 2005-09-29 08:01:49 +00:00
Steve McIntyre 9fdb678d8b Copied Richard Hirst's hppa ramdisk size fix for sarge as well as etch 2005-09-26 21:25:25 +00:00
Joey Hess c2df2f7c1e - Fix ramdisk_size value for hppa 2005-09-21 07:32:45 +00:00
Sven Luther 3adf94038b Readded the bitness thingy, which got lost before i had svn access. 2005-09-20 17:26:10 +00:00
Sven Luther 5aaa17f9fc Better fix, which doesn't go over the net. 2005-09-20 15:10:06 +00:00
Sven Luther 25b483599a Now test not only if $DI_DIR is not empty, but also if it is a real dir.
This was not the case in the powerpc builds, and thus the build failed.
2005-09-20 14:55:36 +00:00
Sven Luther 75b9f25cc5 Added set -x to actually provide some visible info in the log about what is happening. Hopefully it will work this time. 2005-09-20 12:15:50 +00:00
Raphaël Hertzog 86b020552d Little fix committed for Sven Luther. 2005-09-19 14:12:28 +00:00
Joey Hess 46f282657d second half of sven's patch 2005-09-17 17:05:27 +00:00
Joey Hess fc0ae496b1 * Applied patch from Sven Luther which adds powerpc64 kernels to
the CDs, and adds IBM chrp boot files. Closes: #328274
* Remove Debian_sid task, which dates from before woody and should not be
  used.
2005-09-14 17:55:39 +00:00
Joey Hess 34df7ddf4e fix sid symlinks, and begin versioning in svn 2005-09-07 15:21:11 +00:00