#
# This file will have to be sourced where needed
#

# Unset all optional variables first to start from a clean state
unset NONUS             || true
unset FORCENONUSONCD1   || true
unset NONFREE           || true
unset CONTRIB           || true
unset EXTRANONFREE      || true
unset LOCAL             || true
unset LOCALDEBS         || true
unset SECURED           || true
unset SECURITY          || true
unset BOOTDIR           || true
unset BOOTDISKS         || true
unset SYMLINK           || true
unset COPYLINK          || true
unset MKISOFS           || true
unset MKISOFS_OPTS      || true
unset ISOLINUX          || true
unset EXCLUDE           || true
unset SRCEXCLUDE        || true
unset NORECOMMENDS      || true
unset NOSUGGESTS        || true
#unset DOJIGDO           || true
unset JIGDOCMD          || true
unset JIGDOTEMPLATEURL  || true
#unset JIGDOFALLBACKURLS || true
unset JIGDOINCLUDEURLS  || true
unset JIGDOSCRIPT       || true
unset JIGDO_OPTS        || true
#unset DEFBINSIZE        || true
#unset DEFSRCSIZE        || true
unset FASTSUMS          || true
unset PUBLISH_URL       || true
unset PUBLISH_NONUS_URL || true
unset PUBLISH_PATH      || true
unset UDEB_INCLUDE      || true
unset UDEB_EXCLUDE      || true
unset BASE_INCLUDE      || true
unset BASE_EXCLUDE      || true
#unset INSTALLER_CD      || true


# The debian-cd dir
# Where I am (hoping I'm in the debian-cd dir)
export BASEDIR=`pwd`

export DI=sarge

# Building sarge cd set ...
export CODENAME=sarge

if [ ! "$DI_CODENAME" ]
then
  export DI_CODENAME=$CODENAME
fi

# Version number, "2.2 r0", "2.2 r1" etc.
export DEBVERSION="3.1 r8"

# Official or non-official set.
# NOTE: THE "OFFICIAL" DESIGNATION IS ONLY ALLOWED FOR IMAGES AVAILABLE
# ON THE OFFICIAL DEBIAN CD WEBSITE http://cdimage.debian.org
#export OFFICIAL="Unofficial"
export OFFICIAL="Official"
#export OFFICIAL="Official Beta"

# ... for arch  
if [ ! "$ARCH" ]
then
  export ARCH=`dpkg --print-installation-architecture`
fi

# IMPORTANT : The 4 following paths must be on the same partition/device.
#	      If they aren't then you must set COPYLINK below to 1. This
#	      takes a lot of extra room to create the sandbox for the ISO
#	      images, however. Also, if you are using an NFS partition for
#	      some part of this, you must use this option.
# Paths to the mirrors
if [ "$MIRROR"x = ""x ] ; then
    export MIRROR=/org/cdbuilder.debian.org/src/ftp/debian
fi
if [ "$ARCH" = "amd64" ] ; then 
	export MIRROR=/org/cdbuilder.debian.org/src/ftp/debian-amd64/debian-amd64
fi

# Comment the following line if you don't have/want non-US
#export NONUS=/ftp/debian-non-US

# And this option will make you 2 copies of CD1 - one with all the
# non-US packages on it, one with none. Useful if you're likely to
# need both.
#export FORCENONUSONCD1=1

# Path of the temporary directory
export TDIR=/org/cdbuilder.debian.org/src/deb-cd/tmp/"$INSTALLER_CD""$DI""$ARCH"

# Path where the images will be written
if [ "$OUT"x = ""x ] ; then
    export OUT=/org/cdbuilder.debian.org/dst/deb-cd/tmp/"$INSTALLER_CD""$DI""$ARCH"
fi

# Where we keep the temporary apt stuff.
# This cannot reside on an NFS mount.
export APTTMP=$TDIR/apt

# Do I want to have NONFREE merged in the CD set
# export NONFREE=1

# Do I want to have CONTRIB merged in the CD set
export CONTRIB=1

# Do I want to have NONFREE on a separate CD (the last CD of the CD set)
# WARNING: Don't use NONFREE and EXTRANONFREE at the same time !
# export EXTRANONFREE=1

# If you have a $MIRROR/dists/$CODENAME/local/binary-$ARCH dir with 
# local packages that you want to put on the CD set then
# uncomment the following line 
# export LOCAL=1

# If your local packages are not under $MIRROR, but somewhere else, 
# you can uncomment this line and edit to to point to a directory
# containing dists/$CODENAME/local/binary-$ARCH
# export LOCALDEBS=/home/joey/debian/va/debian

# If you want a <codename>-secured tree with a copy of the signed
# Release.gpg and files listed by this Release file, then
# uncomment this line
# export SECURED=1

# Where to find the security patches.  This directory should be the
# top directory of a security.debian.org mirror.
#export SECURITY="$TOPDIR"/debian/debian-security

# Sparc only : bootdir (location of cd.b and second.b)
# export BOOTDIR=/boot

# Symlink farmers should uncomment this line :
# export SYMLINK=1

# Use this to force copying the files instead of symlinking or hardlinking
# them. This is useful if your destination directories are on a different
# partition than your source files.
# export COPYLINK=1

# Options
export MKISOFS="$BASEDIR/../mkisofs/usr/bin/mkisofs"
# export MKISOFS_OPTS="-r"		#For normal users
# export MKISOFS_OPTS="-r -F ."	#For symlink farmers

# ISOLinux support for multiboot on CD1 for i386
export ISOLINUX=1

# uncomment this to if you want to see more of what the Makefile is doing
export VERBOSE_MAKE=1

# uncoment this to make build_all.sh try to build a simple CD image if
# the proper official CD run does not work
#ATTEMPT_FALLBACK=yes

# Set your disk size here in MB. Used in calculating package and
# source file layouts in build.sh and build_all.sh. Defaults are for
# CD-R, try ~4600 for DVD-R.
if [ ! "$DEFBINSIZE" ] ; then export DEFBINSIZE=639 ; fi
if [ ! "$DEFSRCSIZE" ] ; then export DEFSRCSIZE=639 ; fi

# We don't want certain packages to take up space on CD1...
export EXCLUDE="$BASEDIR"/tasks/exclude-sarge
# ...but they are okay for other CDs (UNEXCLUDEx == may be included on CD >= x)
export UNEXCLUDE2="$BASEDIR"/tasks/unexclude-CD2-sarge
# Any packages listed in EXCLUDE but not in any UNEXCLUDE will be
# excluded completely.

# We also exclude some source packages
#export SRCEXCLUDE="$BASEDIR"/tasks/exclude-src-potato

# Set this if the recommended packages should be skipped when adding 
# package on the CD.  The default is 'false'.
export NORECOMMENDS=1

# Set this if the suggested packages should be skipped when adding 
# package on the CD.  The default is 'true'.
#export NOSUGGESTS=1

# Produce jigdo files:
# 0/unset = Don't do jigdo at all, produce only the full iso image.
# 1 = Produce both the iso image and jigdo stuff.
# 2 = Produce ONLY jigdo stuff by piping mkisofs directly into jigdo-file,
#     no temporary iso image is created (saves lots of disk space).
#     NOTE: The no-temp-iso will not work for (at least) alpha and powerpc
#     since they need the actual .iso to make it bootable. For these archs,
#     the temp-iso will be generated, but deleted again immediately after the
#     jigdo stuff is made; needs temporary space as big as the biggest image.
if [ ! "$DOJIGDO" ];then export DOJIGDO=1;fi
#
# jigdo-file command & options
# Note: building the cache takes hours, so keep it around for the next run
#export JIGDOCMD="$BASEDIR/../jigdo/usr/bin/jigdo-file --cache=$TDIR/jigdo-cache.db"
#export JIGDOCMD="/usr/bin/jigdo-file --cache=$TDIR/jigdo-cache.db"

# HTTP/FTP URL for directory where you intend to make the templates
# available. You should not need to change this; the default value ""
# means "template in same dir as the .jigdo file", which is usually
# correct. If it is non-empty, it needs a trailing slash. "%ARCH%"
# will be substituted by the current architecture.
#export JIGDOTEMPLATEURL=""
#export JIGDOTEMPLATEURL="jigdotemplates/"
#
# Name of a directory on disc to create data for a fallback server in. 
# Should later be made available by you at the URL given in
# JIGDOFALLBACKURLS. In the directory, two subdirs named "Debian" and
# "Non-US" will be created, and filled with hard links to the actual
# files in your FTP archive. Because of the hard links, the dir must
# be on the same partition as the FTP archive! If unset, no fallback
# data is created, which may cause problems - see README.
#export JIGDOFALLBACKPATH="$OUT/snapshot/"
#
# Space-separated list of label->URL mappings for "jigdo fallback
# server(s)" to add to .jigdo file. If unset, no fallback URL is
# added, which may cause problems - see README.
if [ ! "$JIGDOFALLBACKURLS" ];then export JIGDOFALLBACKURLS="Debian=http://gluck.debian.org/cdimage/snapshot/cd/$ARCH/Debian/";fi
#Non-US=http://gluck.debian.org/cdimage/testing/jigdo-area/$ARCH/snapshot/Non-US/";fi
#
# Space-separated list of "include URLs" to add to the .jigdo file. 
# The included files are used to provide an up-to-date list of Debian
# mirrors to the jigdo _GUI_application_ (_jigdo-lite_ doesn't support
# "[Include ...]").
export JIGDOINCLUDEURLS="http://cdimage.debian.org/debian-cd/debian-servers.jigdo"
#
# $JIGDOTEMPLATEURL and $JIGDOINCLUDEURLS are passed to
# "tools/jigdo_header", which is used by default to generate the
# [Image] and [Servers] sections of the .jigdo file. You can provide
# your own script if you need the .jigdo file to contain different
# data.
#export JIGDOSCRIPT="myscript"

# If set, use the md5sums from the main archive, rather than calculating
# them locally
export FASTSUMS=1

# A couple of things used only by publish_cds, so it can tweak the
# jigdo files, and knows where to put the results.
# You need to run publish_cds manually, it is not run by the Makefile.
#export PUBLISH_URL="http://cdimage.debian.org/jigdo-area"
#export PUBLISH_NONUS_URL="http://non-US.cdimage.debian.org/jigdo-area"
#export PUBLISH_PATH="/home/jigdo-area/"

# Specify files and directories to *exclude* from jigdo processing. These
# files on each CD are expected to be different to those on the mirror, or
# are often subject to change. Any files matching entries in this list will
# simply be placed straight into the template file.
export JIGDO_EXCLUDE="'README*' /doc/ /md5sum.txt /.disk/ /pics/ 'Release*' 'Packages*' 'Sources*'"

# Specify the minimum file size to consider for jigdo processing. Any files
# smaller than this will simply be placed straight into the template file.
export JIGDO_OPTS="-jigdo-min-file-size 0"

for EXCL in $JIGDO_EXCLUDE
do
    JIGDO_OPTS="$JIGDO_OPTS -jigdo-exclude $EXCL"
done

export DEBOOTSTRAP_DIR="$BASEDIR"/../debootstrap/usr/lib/debootstrap/
export IGNORE_MISSING_BOOT_SCRIPT=1

# Where to find the boot disks
#export BOOTDISKS=$TOPDIR/ftp/skolelinux/boot-floppies

# File with list of packages to include when fetching modules for the
# first stage installer (debian-installer). One package per line.
# Lines starting with '#' are comments.  The package order is
# important, as the packages will be installed in the given order.
#export UDEB_INCLUDE="$BASEDIR"/data/$CODENAME/udeb_include

# File with list of packages to exclude as above.
#export UDEB_EXCLUDE="$BASEDIR"/data/$CODENAME/udeb_exclude

# File with list of packages to include when running debootstrap from
# the first stage installer (currently only supported in
# debian-installer). One package per line.  Lines starting with '#'
# are comments.  The package order is important, as the packages will
# be installed in the given order.
#export BASE_INCLUDE="$BASEDIR"/data/$CODENAME/base_include

# File with list of packages to exclude as above.
#export BASE_EXCLUDE="$BASEDIR"/data/$CODENAME/base_exclude

# Only put the installer onto the cd (set NORECOMMENDS,... as well).
# INSTALLER_CD=0: nothing special (default)
# INSTALLER_CD=1: just add debian-installer (use TASK=tasks/debian-installer)
# INSTALLER_CD=2: add d-i and base (use TASK=tasks/debian-installer+kernel)
#export INSTALLER_CD=0

# Jeroen: not needed
#export DELOROOT="$BASEDIR"/../delo

# Set to 1 to save space by omitting the release notes
# If so we will link to them on the web site.
#export OMIT_RELEASE_NOTES=0

# Set this to override the defaul location
#export RELEASE_NOTES_LOCATION="http://www.debian.org/releases/$CODENAME"
if [ "$ARCH" = "amd64" ];then
   export RELEASE_NOTES_LOCATION="http://amd64.debian.net/docs/release-notes/"
fi