debian-cd-clone/debian/changelog

1729 lines
78 KiB
Plaintext

debian-cd (3.0.0) UNRELEASED; urgency=low
* Support now added for multi-arch CDs/DVDs, including mixed
binary/source discs. Multi-arch discs should be bootable on those
multiple arches, modulo boot-sector clashes. Extra support added
in boot-i386 and boot-amd64 to make the 2 main arches happily
co-exist.
* Disc sizing is now much more intelligent - sizes are defined
depending on the disk type chosen at the start, and discs are now
filled exactly to those sizes while files are added rather than
the old up-front guessing method. Equally, the metadata on the
disc (Packages, Packages.gz, Sources, Sources.gz, md5sums.txt) is
generated as much as possible while this is happening to make the
sizing code incredibly accurate. Using this method of disc sizing
means that customising discs should be much easier/safer - either
add custom contents at the start and debian-cd will fill the
remainder of the disc, or afterwards roll back the packages on the
disc and add extras later.
* Source is now treated as (almost) just another arch, with most of
the special casing for source hidden internally. If asking for
source-only discs, they will simply be built using all the
available sources. If combined with other arches, the sources will
automatically be chosen to match the binary packages. Meeting GPL
requirements was never so easy!
* Removed lots of old cruft to clean up the codebase:
+ non-US support
+ woody support
+ lots of old support scripts that have been made redundant
+ significantly simpler Makefile, much easier to follow
+ old boot-$ARCH.calc files for estimating boot-file sizes are now
(obviously) obsolete and therefore gone
Other changes:
[ Petter Reinholdtsen ]
* Update tools/boot/*/boot-amd64 to use the correct isolinux
splash image settings, and to insert $KERNEL_PARAMS correctly into
isolinux.cfg. Based on patches already implemented in boot-i386.
[ Joey Hess ]
* Remove 2.4 kernels from generate_di+k_list for i386.
* Remove 2.2 kernel for mac from generate_di+k_list, as it's no longer in
the archive.
* Deal with new xfce-desktop task.
[ Steve McIntyre ]
* Merge patch from Petter to allow override of the default boot choice
in syslinux using the ISOLINUX_DEFAULT config option. Closes: #393229
[ Joey Hess ]
* Include brltty in generate_di+k_list.
* Increase alpha hardcoded ramdisk_size to 20 mb, 16 is too small now.
[ Frans Pop ]
* Remove boot parameters that are no longer needed after switch to initramfs
initrds for sparc and hppa.
* tasks/exclude-etch: clean out obsolete entries.
* tools/generate_di+k_list: generic suffix was dropped for amd64 kernels.
* tools/generate_di+k_list: add new required packages for arm.
* Update task-full-etch and task-essential-etch in tasks for D-I Etch RC1.
[ Steve McIntyre ]
* Update to the latest version of isolinux.bin, as found in syslinux
version 3.31-1.
[ Frans Pop ]
* Add boot option "auto" for powerpc (yaboot) and sparc to support the
installer's new auto-install functionality.
* Update exclude-udebs:
- S/390 installs do not support loading udebs from the CD, so exclude all
- add debian-edu-archive-keyring-udeb
- add ai-choosers, auto-install
- add some new gtk frontend related udebs
- globally exclude any discover udebs
- clean up obsolete exclusions
* Include "tape" images again for S/390.
* Makefile: remove line continuation inside perl command as that breaks with
GNU Make 3.81.
[ Steve McIntyre ]
* Change the default DEBVERSION from 3.2 to 4.0 to match etch.
[ Joey Hess ]
* Add new language tasks to task.list.
* Add files to support building KDE CDs/DVDs. These would be images
hardcoded to install the KDE desktop task, and to create them, configure
CONF.sh as follows:
TASK=tasks/Debian_etch-kde
KERNEL_PARAMS='tasks="kde-desktop, standard"'
MAXCDS=1
NOSOURCE=1
* Add similar files for Xfce.
[ Frans Pop ]
* Include floppy disk images again for i386.
[ Steve McIntyre ]
* Split final md5sum of images out from Makefile into tools/imagesums;
if we've made jigdo files then *don't* waste time running md5sum on
the images as well!
* Add the build date/time into a few more places so people can see them
more easily; add the build time into the .disk/info file.
* DEVEL BRANCH MERGE: Change mkisofs_opts usage: add a shell function
for the boot-$arch scripts to use rather than simply appending to the
$N.mkisofs_opts file directly. Needed for forthcoming multi-arch
support.
* Stop using the silly .raw extension for output images, use .iso instead
* Improve support for different disk types. Specify DISKTYPE in CONF.sh,
and it will affect both the output name later (so it's now possible to
distinguish between CDs and DVDs). Defaults to CD if not otherwise
set. DISKTYPE will be used more in the future for sizing too, but that
merge can wait a while longer yet. Closes: #361422
* Use DISKTYPE and COMPLETE values to create the file .disk/cd_type for
the installer to use.
* Add bpalogin near the top of the task list, as requested a long time
ago. Closes: #231583
* Dump the mkisofs command-line used for each CD into .disk/mkisofs
as we make it. Closes: #258099
[ Frans Pop ]
* Fixed double target in yaboot.conf; reported on IRC by jbrand.
[ Joey Hess ]
* Add a temporary hack in Debian_etch-kde to use sid d-i, to get a fixed
preseed that supports preseeding of tasks.
* build.sh: Don't force IMAGETARGET to bin-official_images when NOSOURCE
is set, if IMAGETARGET is also already set, as in a kde cd build.
[ Steve McIntyre ]
* Remove sh from the arch list in generate_di_list, to make builds quieter.
* Another devel branch merge: Change tools/grab_md5 to also look for
md5sums in the installer suite as well as the archive suite in
case they're different. Also removed old woody support, to clean
up the code a little. Updated Makefile and update-cd to match the
command-line interface change.
[ Frans Pop ]
* tasks/exclude-etch: clean up packages no longer in the archive.
* tools/generate_di+k_list: no longer include kernel-image packages for
powerpc as we don't support 2.4 based installs anymore. Closes #401429.
* Daily builds for amd64 now done by Andreas Barth; with thanks to
Kurt Roeckx for his past builds.
[ Colin Watson ]
* Include prep support on powerpc images again.
[ Steve McIntyre ]
* Add Packages and Sources files to the Release file; clean up the
checksums. Closes: #402267
* Lower-case package names at various points to work around apt bug
#402354. Fixes the long-standing warnings from list2cds about "Use
of uninitialized value in string comparison", and allows some poor
packages to make it onto CDs for the first time...
* Improve performance: rewritten tools/make_disc_trees in perl so we
can call add_packages directly as a perl function rather than via
fork/exec all the time. Re-arranged tools/add_packages to make
this work.
* Improved logging in add_packages.
* When we've finished making a CD tree in make_disc_trees.pl,
re-compress the gzipped Sources and Packages. Workaround for bug
#402482 in busybox gunzip code.
* Don't put ppc boot files on discs >1.
* Add more hfs options to m68k discs, to match ppc.
* Make list2cds more verbose in log output, especially when
dependencies have failed so a package can't be added.
[ Frans Pop ]
* CONF.sh: case can handle empty variables fine; whitespace cleanup.
* CONF.sh: don't determine ARCHES if already set; don't export CPU and
KERNEL.
[ Steve McIntyre ]
* Update documentation to at least vaguely match how things work.
* Added support for hook scripts in a few places around the CD
creation process, to help people customise their CDs. Quite a
lot of refactoring needed in make_disc_trees.pl needed to do that.
* Removed more cruft:
+ old defs in CONF.sh
+ old defs and rules in the Makefile
+ tools/add_secured
+ don't depend on jigdo-file any more
+ don't depend on apt-utils any more - we don't use apt-ftparchive now
+ don't depend on debootstrap any more - we grab and use the
latest version direct from the archive instead these days
+ don't suggest binutils-multiarch, we haven't needed that for mipsel
CDs since woody!
+ remove the SKIPMIRRORCHECK variable, now completely obsolete
+ change the mkisofs dep from (mkisofs | mkhybrid) to
(mkisofs | genisoimage)
+ remove Recommends on debianutils
+ remove Suggests on palo - we grab and use the correct version
direct from the archive instead these days
+ remove Suggests on delo - we grab and use the correct version
direct from the archive instead these days
* Other cleanups:
+ Make build_all.sh work again, adapting build.sh
+ Promote Suggests: on netpbm, syslinux to Recommends:
+ Make make_disc_trees.pl and start_new_disc fail better on errors
[ Frans Pop ]
* Add linux-image-2.6-prep for powerpc.
* Create a new tasks/forcd1-etch file and remove old cruft.
[ Steve McIntyre ]
* Gunzip the installation manual in .txt and .pdf format, so it's
useful on other platforms too.
* As a last-minute step before building images, fill in the TOTALNUM
value in the README files in the root of each image.
-- Frans Pop <fjp@debian.org> Fri, 29 Dec 2006 04:11:53 +0100
debian-cd (2.2.25) unstable; urgency=low
[ Joey Hess ]
* Remove net-drivers access floppy from full CD images.
[ Frans Pop ]
* Consistently change location for installation guide to /doc/manual
on the CD.
* Update author (and timestamp) in README.
* Colin Watson has taken over daily d-i builds for PowerPC.
[ Steve McIntyre ]
* Fix to tools/grab_md5: when building the md5-list, DO NOT use the
"current" symlink in the d-i directories - that causes jigdo problems
later on. Use the real dirs (as dated) instead.
[ Frans Pop ]
* Remove exclusion of openbsd-inetd for Etch as it is now the prefered
dependency from netbase. For some reason debootstrap requires both inetd
packages, so don't exclude netkit-inetd.
Makes full/netinst images have base_installable again.
* Thiemo Seufer has resumed building images for mips.
[ Colin Watson ]
* Only tell mkisofs to use the prep initrd if it's available (which it
currently isn't for 2.6.16).
[ Steve McIntyre ]
* Fix to tools/grab_md5: reset the file and dir name after each source
package is finished with.
* Add extra debug in tools/boot/etch/boot-i386
[ Joey Hess ]
* ths has taken over mipsel builds
* Add sudo to generate_di+k_list, it's needed for installs w/o a root user.
* Add support to boot/etch/boot-i386 for adding gtk images. If the
isolinux files include .with26+gtk, include gtk initrd along with the
2.4 kernel. If .withgtk, include gtk initrd along with the default
(presumably 2.6) kernel.
* i386 has stopped building because the el-torito boot images were turned
off (due to size issues). Fix this by not failing if the el-torito images
arn't there.
* d-i doesn't include bast images anymore, drop from boot-arm.
* Update task.list adding more language tasks.
* Update task-essential-etch build recipe to exclude the kde-desktop
task since it won't fit on the CD.
* Move kde-desktop to end of task.list for same reason.
* Update task-full-etch to current tasksel.
[ Steve McIntyre ]
* Add better GNU/kFreeBSD support in setting ARCH in CONF.sh.
Closes: #327470
[ Joey Hess ]
* Applied patch from smarenka to add 2.6 kernels for m68k, also 2.4 kernels
for appropriate m68k subarches, and also emile, amiboot, atari-bootstrap,
and initramfs-tools for m68k.
[ Steve McIntyre ]
* Add extra arm kernels and more utilities into the task lists.
Closes: #373225
[ Joey Hess ]
* Correct url to the amd64 dailys.
* Add gtk initrd to amd64 images if available.
* Add autorun file to amd64 images if there's a README.html, same as for
i386.
* Add pcmciautils-udeb to udeb_include lists; something needs to pull it
in and like pcmcia-cs-udeb its priority won't.
[ Frans Pop ]
* Wouter Verhelst has taken over daily d-i builds for powerpc.
* AMD64 d-i images are now available from people.d.o.
* Add cryptsetup to first CD; needed for installations using encrypted
partitions.
[ Joey Hess ]
* Add 686 kernels, since the netinst CD is much larger and can now easily
fit them and this makes the CD much more attractive for many users.
[ Frans Pop ]
* Drop 2.4 support for sparc64; switch from 2.4 to 2.6 for sparc32.
* Exclude 2.4 kernel udebs for sparc and s/390 (s/390 has switched to 2.6).
* Include only 2.6 kernel images for sparc.
* Update to libdevmapper1.02.
* No need to include yaird for m68k.
* Drop initrd-tools for ia64, powerpc and sparc.
* Include initramfs-tools instead of yaird for ia64 and sparc.
* No initramfs generator needed for mips, mipsel and m68k.
[ Steve McIntyre ]
* Switch from 2.4 to 2.6 kernels for arm, mips and mipsel.
* Switch from yaird over to initramfs-tools for arm.
* Much simplified generate_di+k_list - mips and mipsel don't need script
fragments any more.
* Added elilo for i386.
[ Joey Hess ]
* Update task-essential-etch.
* Update task.list to include all the new language tasks.
* Update task-full-etch.
[ Steve McIntyre ]
* Mips has dropped r5k-ip22 kernels and gained r5k-ip32. And r5k-ip32
doesn't have CD boot support yet, so don't attempt to use the cdrom
boot image.
[ Frans Pop ]
* There are no "tape" images with 2.6.16 for S/390.
* Exclude floppy and el-torito images for i386 as they are not being built.
* Update exclude-udebs lists.
* Exclude 2.4.27 kernel packages from CD1 for sparc and s/390.
* Exclude 2.6.15 kernel header and image packages from CD1.
* Exclude 2.6.16 xen and vserver kernel packages from CD1.
* Update generate_di+k_list to include libsysfs2.
* Update popularity contest data for etch.
* Update generate_di+k_list to include libdiscover1.
[ Petter Reinholdtsen ]
* Add more features to get_diskusage.pl, making it easier to track
dependencies and rejected packages.
* Correct splash screen generation for sarge and etch, making sure the
correct background colour (black) is selected.
[ Steve McIntyre ]
* Try to fix the "unofficial development version" bug on official CDs.
[ Joey Hess ]
* Include libc6-i686 in generate_di+k_list, base-installer will
soon begin installing this onto machines that can use it.
(To regain some space, libc6-amd64 will soon stop being standard priority,
and drop off.)
* On sparc, include libc6-sparcv9 and libc6-sparcv9b, which base-installer
will also pull in.
[ Colin Watson ]
* Cope with cdrom64 -> cdrom renaming for powerpc64 subarchitecture.
[ Sven Luther ]
* [powerpc] Added a rescue option to yaboot.conf as well as the pegasos boot
script.
[ Colin Watson ]
* Remove obsolete devfs=mount,dall and init=/linuxrc options from
yaboot.conf and pegasos boot script.
* Remove init=/linuxrc from hppa.
[ Otavio Salvador ]
* Applied patches that are being in use at O.S. Systems and that are
useful to others:
- allow to use different name for final iso image;
- allow to set the script to be used in debootstrap to check if all
base need package are present.
[ Frans Pop ]
* Introduce new environment variable NOSOURCE that allows to build CD images
using a local mirror that does not contain source files. This new variable
obsoletes setting IMAGETARGET, though that is still supported for
backwards compatibility. Closes: #320205.
[ Steve McIntyre ]
* Update the suggested DVD size in CONF.sh to a saner number
* Re-sync CONF.sh over debian/CONF.sh
* Minor changes to README.html.in and generation of README.html:
cope with unofficial, official beta and official release CDs
better. Let's not repeat the sarge mistake. Closes: #312604
* Trivial updates to update-cd
[ Frans Pop ]
* Update base-etch and popularity-contest-etch in tasks.
* Update task-full-etch and task-essential-etch in tasks.
[ Steve McIntyre ]
* Update Dependencies to allow installation/use on GNU/kFreeBSD. Thanks
to Petr Salinger for the patch. Closes: #378977
* Fix KERNEL_PARAM breakage. Thanks to Vagrant Cascadian for the patch,
closes: #387255
* Removed reference to obsolete "mirrorcheck" target in the README
file. Closes: #384064.
* s/sarge/etch/ and s/3.1/3.2/ in CONF.sh
* Last upload ready for the etch release (hopefully)
-- Steve McIntyre <93sam@debian.org> Sun, 8 Oct 2006 14:46:48 +0200
debian-cd (2.2.24) unstable; urgency=low
[ Bdale Garbee ]
* update lists of udebs for hppa to reflect kernel name changes, etc
[ Richard Hirst ]
* Fix ramdisk_size value for hppa for both etch and sarge
[ Frans Pop ]
* Update for Sparc:
- sparc64: switch to 2.6.12 kernel; make CD multiboot 2.6 and 2.4,
using 2.6.12 by default
- sparc32: drop 2.6 kernel support as it has no 2.6.12 kernel
- restructure silo.conf with proper support for install, expert and
rescue boot options
[ Joey Hess ]
* Remove contrib/testingcds. For now the entire setup directory used to
build Debian CDs is in svn at svn+ssh://svn.debian.org/svn/debian-cd/setup
* Point sid symlinks at etch.
* Now build etch CDs by default.
* Remove DH_CODENAME unset from CONF.sh, to allow it to be passed in
via the environemtn. Closes: #326814
* Remove Debian_sid task, which dates from before woody and should not be
used.
* Don't hardcode the path to debootstrap. And assume there is a debootstrap
available, as it is a dependency.
* Since debootstrap is in sbin, add sbin to PATH.
* Remove other random hadcoded paths to programs in bin.
* generate_di+k_list: Deal with kernel package name change. All arches
with 2.6 kernels will now include only linux-image packages.
* generate_di+k_list: Add some mips and mipsel subarches that are new in
etch or were missing before.
* generate_di+k_list: Use kernel-image-2.4-<subarch> and
linux-image-2.4-<subarch> packages for as many architectures as we can,
instead of enumerating the versions of the kernels to include. Much
cleaner and more robust and will make d-i more robust as well.
* Update task.list with new etch (and some old sarge) tasks.
* Update task-full-etch and improve the generation recipe.
* Change debootstrap --print-debs calls to pass debootstrap a mirror to use
and a temporary directory to work in, so it will avoid downloading the
Packages files from its hardcoded mirror, and work on amd64 and other
situations with a non-official Debian mirror. Neccessary since the new
version of debootstrap has dependency resolution enabled by default.
* Don't chmod amiboot if it doesn't exist.
[ Sven Luther ]
* Fixed powerpc cd builds, added powerpc64 kernels to etch/sid, dropped
2.6.8 and remaining 2.4.27 kernels, except the nubus/apus ones. Added IBM
chrp boot files. (Closes: #328274)
[ Joey Hess ]
* Order task-essential-etch using task.list, and regen to match current
tasksel.
* Add acpid to generate_di+k_list so it's on the netinst.
* Add more udebs to excludes trying to trim the netinst size down.
* Exclude cdebconf from CD1s to prevent both it and debconf being pulled in
by | dependencies. cdebconf isn't usable right now and has a large
dependency chain.
* Exclude inetutils-inetd and openbsd-inetd from CD1 for similar resons.
[ Colin Watson ]
* generate_di+k_list: Add hfsutils for powerpc; it's no longer in base but
yaboot-installer needs it.
[ Steve McIntyre ]
* For full CD/DVD builds, check that we have an "extra" override
containing task info. If not, use the sid override instead.
[ Joey Hess ]
* Add default UDEB_EXCLUDE files that differ for businesscard, netinst, and
full CDs.
* Make the full CD have apt-mirror-setup in its udeb_exclude file, to avoid
that component being installed to satisfy apt-setup's dependency on it (I
hope), so that the user is not unncessarily asked for a mirror during a
full CD install, but is still asked for one during installs from the
smaller CDs.
* Add initramfs-tools to generate_d-i+k_list
[ Steve McIntyre ]
* Merged in MAJOR changes for jigdo creation - the long-separated JTE
patch.
* Split out the actual ISO/jigdo creation code from the Makefile into
tools/make_image
[ Joey Hess ]
* Explicitly list ppp and pppoeconf in generate_d-i+k_list, since they are
not installed by debootstrap and we do want them on netinst CDs.
[ Steve McIntyre ]
* Split out the code that copies debs into the temporary trees and
creates Packages files from the Makefile into tools/add_debs
* Split out the code that copies sources into the temporary trees and
creates Sources files from the Makefile into tools/add_source_packages
* MAJOR CHANGE: Stop using apt-ftparchive to generate the Packages
files on each CD/DVD; instead grab the details for each package
directly from the Packages file in the archive. MUCH MUCH faster,
and uses less code too. Affected scripts:
+ tools/scanpackages now just generates Release files. argv[1]
used to be "scan" or "install", but no longer used
+ tools/add_debs slightly simplified - old code removed
+ tools/add_packages now dumps out Packages file fragments as each
.deb and .udeb is copied into the temporary trees
+ WARNING: Any uses of the "before-scanpackages" hook may now
break - shout if you're affected.
* Fix the new Packages file generation to cope with LOCAL packages
too. A simple change to add checking for /local/ ; hopefully it
will do the trick.
* Use "|" rather than "/" as a sed separator in the etch boot-amd64
and boot-i386 scripts. Closes: #342344
* Add the ppptp-linux package to CD#1. Quick hack adds this from the
Makefile for now; FIXME later... Closes: #255367
* Minor change to correct the README - BASEDIR var means we don't
have to cd to /usr/share/debian-cd/ any more. Closes: #280191
[ Joey Hess ]
* Update base-etch with current debootstrap, and also update the recipe to
create it due to changes in debootstrap.
* Remove exim4 from the netinst CDs by adding further insane cruft to the
insane cruft already in the Makefile. (debootstrap no longer installs an
MTA, so this should save some useful space on the netinsts)
* Remove lvm10 from generate_di+k_list, d-i uses lvm2 now.
* Audited all the apt-install commands in d-i, and added these packages
to generate_di+k_list: pcmciautils, dosfsutils (barely needed),
udev, installation-report, palo, elilo, sibyl, sibyl, colo, powerpc-utils,
silo, vmelilo.
Some of the bootloaders were alredy included via debootstrap, but as they
are being removed from there, it's better to add them explicitly here.
* Remove iso-codes from netinst, not used.
* Drop floppies from i386 netinst and businesscard; this will make the
netinst small enough to fit on 128 mb usb keychains again.
* Deal with 386 -> 486 name change in kernel images.
* Exclude ttf-cjk-compact-udeb.
[ Steve McIntyre ]
* Cope with mipsel boot images moving location. Closes: #349563.
* Make sure that all the scripts use Packages.gz rather than Packages
when looking up metadata in the archive - Packages is deprecated.
* Cope better with badly-formatted stanzas in Sources.gz
[ Joey Hess ]
* Exclude reiser4progs udebs from CD, since there is no reiser4 in the
Debian kernel.
* Exclude libreiserfs0.3-udeb from CD, no longer used by parted.
[ Steve McIntyre ]
* Add an initial copy of boot-amd64.calc for etch
[ Frans Pop ]
* For etch, pick up the installation guide from the appropriate
package in the archive rather than from the d-i area.
* Add missing envvar checks in tools/generate_di*_list scripts.
* arm: risc* flavours are no longer built. Closes: #351818.
* Martin Michlmayr has temporarily taken over daily d-i builds for mips
from Thiemo Seufer.
* Kyle McMartin is now taking care of HPPA daily builds.
[ Joey Hess ]
* Switch alpha to 2.6 kernels.
* Add linux-image-2.6-footbridge and linux-image-2.6-s3c2410
arm kernels as d-i now uses these.
[ Steve McIntyre ]
* Fix the environment variable checks in tools/generate_di+k_list.
* Update the boot-sparc scripts to improve the algorithm for finding
the right version of silo to use - grab the filename from the
appropriate Packages file rather than looking in the silo
directory in the pool.
[ Joey Hess ]
* generate_di+k_list: Switch initamfs generator to per-arch,
based on what base-installer installs:
- initramfs-tools on i386, amd64, alpha, powerpc, arm
- yaird on hppa, ia64, mips, mipsel, sparc, m68k
[ Sven Luther ]
* Added icon to powerpc/chrp bootinfo.txt, which will allow booting on IBM
RS6K and pSeries. Closes: #352672
[ Steve McIntyre ]
* Mipsel boot images haven't actually moved yet in etch. Cope with this
- fall back to the old location if the new one isn't there.
[ Frans Pop ]
* generate_di+k_list:
- switch to initramfs-tools by default for hppa
- include openssh-server; is installed when network-console is used
- add libsysfs1; is not included otherwise because the udeb provides it
-- Steve McIntyre <93sam@debian.org> Mon, 6 Mar 2006 23:30:27 +0000
debian-cd (2.2.23) unstable; urgency=low
* Raphael Hertzog
- Patch from Sven Luther for pegasos support already applied
by Steve McIntyre. Closes: #311925
* Steve McIntyre
- Added sed hack to make sarge appear as "stable" in the Release
files we generate on the CDs (for the sarge release). Removed the
hack sgain before the 2.2.23 package build.
- Download the release notes and try to fit them onto
CD#1. Updated sarge's README.html.in to point to them
- Updated tools/add-bin-doc to stop warnings on this.
- Added patch from Sven Luther to add a forth script to make
ppc/pegasos easier to boot. Closes: #311925
- Re-add the kernel-headers packages to match kernel images (only
on i386 and amd64). Closes: #249386
- Made list2cds more verbose
- Added tools/sarge/upgrade-hppa.sh and tools/sarge/upgrade-sparc.sh
to install the upgrade-kernel bits on CD#1
- Added tools/dedicated_source: simple script used to add extra
source packages onto _binary_ CDs. Used for the amd64 sarge release
so far.
- Added patch from Frans Pop to use $CODENAME for exclusions.
Closes: #320206
- We no longer need to use md5sum.textutils, as dpkg no longer ships a
non-64-clean version. We can now just use plain "md5sum".
Closes: #313613
* Joey Hess
- Synced up all sarge changes to etch.
- Use dpkg --print-architecture instead of now-deprecated
--print-installation-architecture
- Completed access cd-drivers transition.
- d-i renamed syslinux.txt to boot.txt, us new name instead of
renaming file from d-i.
- Use isolinux config files included in the d-i debian-cd_info tarball
so it does not need to be maintained in both places.
- Repository moved to svn, update docs to reflect move.
- Add hw-detect-full to exclude list for etch, renamed to disk-detect.
- Switch mipsel to use my builds.
- Applied s390 boot support patch by Frans Pop. Closes: #318021
- partman udeb renamed to partman-base
* Stephen R. Marenka
- Changed m68k boot for etch to handle etch changes in d-i.
-- Steve McIntyre <93sam@debian.org> Tue, 23 Aug 2005 00:02:40 +0100
debian-cd (2.2.22) unstable; urgency=critical
* Steve McIntyre
- Prepared YA "last before sarge" debian-cd release
- Urgency "Critical" to make sure we make it in...
* Joey Hess
- Add post-sarge udebs rescue-check, initrd-preseed, and preseed-common
to the udeb exclude list since these will be/are inluded on sid initrds.
- Add etch directories; point sid symlinks to them.
- Add rescue stanzas to etch isolinux.cfg. Rescue mode is supported in
post-sarge d-i images only.
- Add support for f4.txt that is for systems with the 2.6 kernel.
- Exclude new mouse-modules udebs from CDs until something in d-i uses
them.
- debian-installer task files renamed to include distro name and branched
for etch.
* Steve McIntyre
- Make woody's post-boot-mipsel script cope with extra fields in the
output of sarge's isoinfo
- Add Suggests: on netpbm and syslinux. Closes: #301345
- Count the total number of binary and source discs better; sarge can
have more than 9 CDs, so ?.packages doesn't cut it any more.
- Don't copy the whole d-i cdrom directory onto CD1 for amd64.
Closes: #306926
- Don't copy boot.img.gz onto amd64 CD1.
- Added Manty's testingcds script as an example of debian-cd use
- Updated sarge task lists to match the latest sarge CD build
* Santiago Garcia
- Allow the usage of a local mirror of the daily d-i builds to be used
for sid_d-i builds, this is done by setting DI_WWW_HOME=default and
DI_DIR=/path/to/the/mirror
- Add autorun capabilities to i386 cds so that instead of getting the
"what do you want Windows to do" question under XP, we get the html
README started. Closes: #185238
- Make the jigdos use the same naming scheme as the isos, as per my
proposal to the list.
- Add some amd64 patches from Goswin: Fixed boot-amd64 and added
some packages missing on netinsts.
- Port to etch previous changes I commited for sarge.
-- Steve McIntyre <93sam@debian.org> Wed, 01 Jun 2005 13:04:33 +0100
debian-cd (2.2.21) unstable; urgency=low
* Steve McIntyre:
- Prepared YA "last before sarge" debian-cd release.
* Raphael Hertzog
- One line patch to correct a five year old bug that nobody noticed !
Closes: #285382
- Change maintainer to "Debian CD Group <debian-cd@lists.debian.org>" and
put myself into Uploaders (as well as Santiago Garcia Mantinan & Steve
McIntyre). That's because I'm not keeping up well enough with debian-cd
and I need more people involved in managing bugs.
- Apply patch from Horms <horms@debian.org> to fix some problems with
inclusion of local udebs. Closes: #258029
- Apply another patch from horsm@debian.org to try to look for d-i images
in "local" dirs first. Closes: #258026
- Use LC_ALL=C when calling apt-cache since the output is now translated.
Closes: #290959
* Steve McIntyre
- Substantially updated update-cd:
- Cope with Woody r3 updates taking more than 1 CD per
architecture.
- (Optionally) use JTE mkisofs extensions to create jigdo
files directly.
- Added amd64 support in several places, looking (oddly) very similar
to i386 for now. The help texts displayed by isolinux at boot still
need updating - HELP!
* Stephen R. Marenka
- m68k: add kernel-image-2.4.27-amiga to debian-installer+kernel.
* Santiago Garcia
- Update debian-installer's tasks.
- Update calc script and calc files.
- Make i386 cds 8.3 filenaming compatible again.
- Workaround the two kernels problem on hppa.
- Fix the kernel-image-2.4.27-amiga thing on generate_di+k_list.
- Add support for arm to generate_di+k_list.
* Joey Hess again:
- Since amd64 is not on standard debian mirrors, and generate_d-i+k_list
must be runnable on them, make it chack for absence of amd64 Packages
files and add a dummy kernel for amd64. This will need to be manually
kept up-to-date by the amd64 people for now.
- Didn't fix generate_di_list the same way, since doing so would be too
hard. Next time tasks/debian-installer is updated using this script on
a machine w/o the unofficial amd64 archive, the am64 info in the file
will be lost.
- Add DO NOT EDIT warning messages to generated files in cvs.
- Check and revert manual modifications to tasks/base-sarge. This file is
automatically generated and those mods would have been lost:
- Add fileutils to generate_d-i+k_list, "until kernels get fixed",
whatever that means.
- arcboot was already in generate_d-i+k_list.
- Update tasks/debian-installer+kernel using generate_d-i+k_list.
- Sort package lists in tasks/base-sarge to ease comparisons when
updating.
- Update tasks/base-sarge for debootstrap 0.2.45. This includes the
following removals:
- aboot: already listed in debian-installer+kernel
- gcc-3.2-base, libdb2, libgcrypt1, libgnutls7, libident,
libdb2, libtasn1-0: obsolete
- modconf: obsoleted by d-i
- setserial: not base anymore
- slang1: turned into slang1a-utf8
- libident: not needed by base anymore
- lilo: in debian-installer+kernel
- mbr: not installed anymore
- pcmcia-cs: in debian-installer+kernel
- syslinux: not installed
- "filesutils": typo; fileutils in generate_d-i+k_list for m68k
- quik: in debian-installer+kernel
- yaboot: in debian-installer+kernel
- arcboot: in debian-installer+kernel
- delo: in debian-installer+kernel
And the following additions:
- libdb4.2, libgcrypt11, libgcrypt7, libgnutls10, libgnutls11,
libgpg-error0, libtasn1-2: new libraries
- console-tools: now installed by debootstrap even on s390
- Exclude all the new amd64 kernel images from cd #1, no space.
- Forgot to exclude old kernel-image-2.6.7-1-686-smp from cd #1.
- Add network-console-config to forcd1 since it's needed by the
network-console udeb. Closes: #279238
- Exclude xmail from CD1 (new MTA), and exim (old MTA)
- Exclude some kernel-headers with no matching kernel-images from CD1.
- Update task lists to reflect tasksel changes.
- Exclude new kernels from CD1.
- Switch mips daily builds to new builds by ths.
- Update task files for tasksel 2.22.
- Exclude more new kernel images from CD1.
- Stop hardcoding sid as the distribution to take the installation manual
from, use DI_CODENAME instead.
- Add OMIT_MANUAL variable, which can be set to 1 to drop the install
manual from small CDs to save space. We will probably be adding several
new translations, and possibly PDFs, and that would use too much space
on the small CDs.
- Also make the README link to the manual on the Debian web site if
OMIT_MANUAL=1.
- Update the README to mention manual translations are available.
- More README updates from patch by Frans Pop. Closes: #300301
- libdevmapper1.00 renamed to libdevmapper1.01, update debian-installer
task. Closes: #298724
- Sparc daily builds moved.
* Bdale Garbee
- update tasks and tools to make 2.6.8 kernels primary on hppa
- add ramdisk_size=16384 to palo call in post-boot-hppa
* Colin Watson
- Disable CD timeout on powerpc.
- Add localechooser to exclude-udebs.
-- Steve McIntyre <93sam@debian.org> Mon, 21 Mar 2005 22:07:51 +0000
debian-cd (2.2.20) unstable; urgency=medium
* Joey Hess
- Remove bogus init=/linuxrc, we have not had a linuxrc in d-i for a long
time and I don't know how that managed to work.
- Update path to ia64 cdrom/boot.img.
- Tweaked exclude-udebs-i386, removing fat-modules as it's not available
otherwise if booting from floppy, and removing excludes of partconf,
partitioner, and discover2-data-udeb, which are not in unstable for i386
any longer.
- Updated exclude-udebs to match the current CD initrd package list.
- Access floppy reorg.
- Sparc daily builds moved to joshk's builds.
- Update tasks for 2.4.27 and 2.6.8 kernels.
- Remove access floppies to save space on netinsts. Also remove
net-drivers floppy and some other things not really needed for install
from CD.
- Add 2.6 kernels to ia64 netinst CDs (and incidentially, update to
2.4.27).
- Drop i386 floppies that have gone away in d-i.
- Put 2.4, not 2.6 kernels on hppa cd.
* Stephen R. Marenka
- Add support for m68k reorganization.
- Bump m68k 2.4 kernels to 2.4.27.
- Handle missing m68k/bvme6000 floppy.
* Petter Reinholdtsen
- New variable SPLASHPNG pointing to replacement splash image on i386.
* Kenshi Muto
- Fix cp routine around EXTRA_DISK_IMAGES in tools/boot/sarge/boot-i386
(add space to cp arguments)
- Add floppy/asian-root.img, floppy/mideast-root.img and
floppy/cyrillic-root.img to EXTRA_DISK_IMAGES (but may it be treated
as DISK_IMAGES?)
- Fix typo in test evaluation. (tools/boot/sarge/boot-i386)
- Add localization-config.
* Colin Watson
- Add "--" end of installer kernel params markers to yaboot.conf.
- Drop compatibility with old powerpc 2.4/2.6 d-i image layout, since
the changed image layout reached sarge a while ago.
- Remove 2.4 images from power3 and power4; those few who want them can
netboot.
- Remove 2.6 PReP images from power3 and power4, as no such machines
exist.
- Hardlink powerpc and powerpc/minimal vmlinux files together, since
they're identical.
- Remove powerpc-small-pmac kernel from the netinst. base-installer
hasn't installed it since April, and according to Sven it's only
useful for building floppies.
* Santiago Garcia
- Try to fix powerpc DVD builds via -hfs-parms MAX_XTCSIZE.
- Add prep powerpc support.
- Update debian-installer tasks.
- Add tools/calc script to update .calc files with up to date
estimations on the iso size parameters.
* Thiemo Seufer
- Add arcboot to the mips tasks/base-sarge list, like it is done for
other bootloaders.
- Add a default bootfile named sashARCS for mips, aliased to r4k-ip22.
* Joshua Kwan
- Add ramdisk_size=16384 to silo.conf. closes: #274958
* Steve McIntyre
- Another upload before sarge.
-- Steve McIntyre <93sam@debian.org> Fri, 22 Oct 2004 21:12:15 +0100
debian-cd (2.2.19) unstable; urgency=medium
* Steve McIntyre
- (Hopefully this time) Final medium-urgency upload to get a
recent debian-cd in before the sarge release. A few bugfixes needed:
- Removed silly build-dep-indep on mkisofs. Closes: #258018
- Fixed typo in tools/boot/sarge/boot-i386. Closes: #267026
* Santiago Garcia
- Change build.sh to allow building non complete CDs, like netinsts.
-- Steve McIntyre <93sam@debian.org> Fri, 20 Aug 2004 14:59:11 +0100
debian-cd (2.2.18) unstable; urgency=medium
* Steve McIntyre
- Final medium-urgency upload to get a recent debian-cd in before
the sarge release.
- Update default version to sarge/3.1 for a sarge release.
- Sarge is going to have more than 9 CDs; make sure we clean up all of
the working dirs.
- Removed the -T option to mkisofs. We don't need the TRANS.TBL files
any more, and we should save the space.
- Added support for SIZE_MULT_x when calculating full disc
sizes. Best use is on m68k and powerpc images where HFS hybrid
metadata seems to add ~10% to the size of the image.
- Various updates to update-cd to cope with changes r0->r2.
- Updated copy of CONF.sh in debian directory to match the working copy in .
- Small lintian fixes.
* Raphael Hertzog
- Add missing Build-Depends-Indep. Closes: #258018
- Remove debian-keyring.tar.gz from the doc dir.
- Don't include Contents-$ARCH.gz on netinst/businesscard CD.
* Joey Hess
- Include sarge installation manual on sarge CDs.
- Remove install/doc, and just use doc/install.
- Patch from Thiemo Seufer to add mips and mipsel kernels.
Also, remove some packages from arches that do not need them.
- Remove module-init-tools-udeb from the CD.
- Remove raidtools2-udeb from the exclude list, while nothing depends on
it, it can be handy for manually setting up raid.
- discover has been renamed to discover1
- On i386, include discover on the CD as well, this is discover verson
2, and is used with the 2.6 kernel.
- Based on user reports, remove the read-only, and pass "rw" to the kernel
in silo.conf.
- Include only 2.4 ia64 kernels on the d-i CD for now, the 2.6 ones
are not a good choice ATM according to bdale.
- silo.conf fixes.
- Fix mirror_check to look under LOCALDEBS for files if it is set.
- Add mdadm to the netinst CD, needed for software raid installs.
- Add lvm2 (and dependencies libdevmapper1.00 and lvm-common)
for new partman. Left lvm10 on the CD for now, remove later.
- Add jfsutils to netinst cds.
- Add usbutils to netinst cds, it'll be installed by a future version
of hw-detect.
- Add tools/get_diskusage.pl (originally by Petter).
- Add update-popcon Makefile target (taken from Skolelinux).
- Add a KERNEL_PARAMS variable, which can be used to add kernel parameters
and is useful for creating things like CDs that install in critical
priority mode. I only implemented it for i386 so far.
- Add MAXCDS config variable, which forces debian-cd to stop after a given
number of binary CDs.
- Only exclude udebs from the CD that are in both the cd initrd and the
hd-media initrd, since both use the CD. This adds back floppy-modules
and firewire-core-modules.
- Add new default udeb_include files (for to full CDs and DVDs) that
include ethdetect and netcfg, to make network configuration happen in
first stage, since the second stage cannot currently do any.
Closes: #240458
- Include debian-installer+kernel into Debian_sarge task to ensure all
debs as well as udebs used by d-i are included.
- Exclude newer versions of i386 kernels to save space. Leave 2.6.x-386
kernels on the CD.
- Update task-essential-sarge to tasksel 2.05. Fix the generator to work
with post-2002 tasksels.
- Update task-full-sarge and task.list to tasksel 2.05. The task.list was
manually ordered to give desktop task priority, followed by servers,
followed by languages.
- NORECOMMENDS should be used for sarge official CD sets (getting full
tasks is more important), and is on by default.
- Add libfribidi0 to generate_di+k_list, needed for BIDI.
- Switch CONF.sh to sarge.
- Uncomment exclude lines.
- Remove the boot.bat script and redundant and incorrect README.tools.
The alternative is to maintain and document them.
- Exclude kernel sources from popcon results, old data skews this badly.
- Remove old kernel sources from interesting-fromcd23, and various other
removals and updates.
- Update the task lists and popcon again.
- Stop excluding 686 and 686-smp kernels, as these are probably the most
popular, and they fit on CD#1 now.
- Add "--" end of installer kernel params markers to the isolinux.cfg.
* Petter Reinholdtsen
- Regenereated tasks/popularity-contest-sarge based on the current data.
- Avoid kernel versions 2.4.24 and 2.6.3 on the first i386 CD, as we
are currently using 2.4.25.
- Remove packages not in testing from exclude-sarge.
- Update list2cds to allow #-comments in the exclude file.
- Try to create $(OUT) instead of just bailing out if it is missing.
- Missing b-f documentation is not a fatal error. Keep
building if it is missing.
- Make it possible to give different CONF.sh files to build.sh.
- Make it possible to change which images to build using CONF.sh.
- Use DI_CODENAME to locate the installation system. This make it
possible to use debian-installer with Woody CDs.
- Avoid illegal dash (-) in cpp architecture defines. Patch
from Colin Watson.
* Stephen R. Marenka
- Update m68k support for sarge.
- Fix m68k/amiga icons.
- Add 2.2 kernel-based cdrom initrd.
- Redo m68k subarch boot/install for sarge.
- Bump all subarchs to 2.4 kernel, except mac.
- Add bvme6000 boot code.
- Workaround boot/install for non-DI_WWW_HOME case.
* Santiago Garcia
- Update isolinux.bin to the version we are shipping with Sarge.
- Update debian-installer tasks.
- Update boot scripts for sarge to be able to build cds using d-i
images from the chosen dist using the mirror or from the web.
- Add support for sarge bootable mips cds.
- Add support for sarge bootable sparc cds.
- Add kernel 2.6 on i386 cds, remove it from the exclusion list.
- Add support for booting 2.6 as well as 2.4 to the first i386 cd.
- Add dirty temporal workaround for saving space on netinst images.
This should be fixed in a proper way when time permits.
- Make fast_sums ignore md5sums of files not in the pool directory.
Closes: #247889
- Add support for sarge bootable mipsel cds (delo based), needs work.
- Fix the dirty workaround bug that was adding debs to businesscards.
- Add 2.6 support to powerpc cds.
- Add yaboot to powerpc netinst cds as debootstrap no longer adds it.
- Update boot-sparc not to depend on a kernel version.
- Remove ramdisk_size param of silo.conf.
- Add initrd-tools to sparc di+k list.
- Generate PPC CD 1 with -chrp-boot. Closes: #252667
- Increase max catalog size on PPC DVDs. Closes: #252652
* Bdale Garbee
- shorten the command line in post-boot-hppa for sarge, as palo can't
handle a command line longer than 127 chars right now
* Otavio Salvador
- Preprocess exclude files much like tasks files are. Closes: #247379
- Check if the missing debootstrap-required is not included on
base_exclude.
- Fix preprocess of exclude files when EXCLUDE is not set.
* Kenshi Muto
- Add floppy/asian-root.img and floppy/access/* as i386 disk image.
* Colin Watson
- Add exclude-udebs-powerpc list with packages already in the initrd,
along the same lines as exclude-udebs-i386. Saves about 11 megabytes.
- Add bootable CD support for arm, following Vince Sanders' advice.
- Include kernel-image-2.4-* metapackages for ia64.
- Unexclude zlib1g-udeb, needed for ssh support in d-i.
- Make sure quik is on the powerpc netinst CD; debootstrap no longer
installs it.
- Bump initrd-size to 10MB for powerpc 2.4. Current d-i initrds exceed
that.
- Remove -safe options from powerpc yaboot menu, as they caused
combinatorial explosion. Instead, document video=ofonly in boot.msg.
- Clarify powerpc boot.msg a bit.
- Cope with debian-installer powerpc image rearrangement.
* Sven Luther
- fixed powerpc list so it includes the 2.6 kernels too as well as the
power3 and power4 2.4 kernels.
* Steve Langasek
- Add alpha and mipsel bootloaders to debian-installer+kernel,
so debootstrap doesn't have to install them
-- Raphael Hertzog <hertzog@debian.org> Thu, 25 Mar 2004 07:33:23 +0100
debian-cd (2.2.17) unstable; urgency=low
* Removed debian/conffiles (useless with debhelper 4).
* Added aptitude on netinst CD (but not on businesscard CD).
Closes: #220125, #219986
It is already on CD1 of a normal CD set.
* Kenshi Muto
- Add jfbterm, unifont into forcd1, d-i+kernel (second stage of
debian-installer needs them).
- Add console-cyrillic, console-terminus, hotplug, iso-codes into forcd1,
d-i+kernel.
* Joey Hess
- Add "expert" mode to isolinux.cfg for sarge.
- Remove pump-udeb from all udeb_includes; netcfg depends on and
uses dhcp-client-udeb.
- Add appropriate kernel-pcmcia-modules package to
debian-installer+kernel task for i386.
- Update the yaboot boot.msg to match the one in d-i cvs.
- Update the yaboot.conf to add expert and expert-safe boot modes.
- Link the d-i INSTALLATION-HOWTO into doc/, if it exists.
- Add my exclude_udebs lists, for general and i386, and modify
generate_di_list to not include udebs from those lists onto the
cdrom, to save space on the netinst cds. Closes: #215469
- Use the d-i docs in sid instead of the woody boot floppies docs.
- Add pcmcia-cs-udeb to sarge's i386_netinst_udeb_include, to support
pcmcia installs.
- Remove console-keymaps from all udeb_includes; they are included
on the cdrom initrds.
- Switch from netcfg-static/dhcp to just netcfg.
- Split udeb_includes for businesscard and netinst; netinst does not
need choose-mirror, while businesscard does.
- Add wireless-tool-udeb to udeb_include for i386 and powerpc netinst
and businesscard images.
- Add pcmcia-cs onto the generate-di+k_list, now that is is not
autoinstalled by debootstrap.
- Document vga=771 boot option for laptops with screen problems.
- Add the debian-edu udebs to the exclude list for netinst CDs, and
remove the deleted di-utils-devicefiles.
- Update boot/sarge/boot-i386 to use the new d-i image names.
- Use d-i boot screens from the debian-cd_info.tar.gz.
Closes: #220612, #221186
- Remove the netboot initrd from netinst CDs, since d-i builds a mini-iso
with this initrd on it, and since the d-i help screen does not mention
the net type.
- Add xfsprogs and reiserfsprogs to generate_di+k_list.
- Add lilo as well; it's not autoinstalled by debootstrap, but
lilo-installer still uses it.
- Increase the i386 isolinux ramdisk size to 10 mb; it's grown due to
translatons and all the scsi drivers.
- Drop lowmemcheck from the CD; it is in the initrd.
- Add wireless-tools to generate_d-i+k_list
- Remove the old partitioner from the CD for i386. (This should also be
done for other arches for which it is not default)
- Include all the powerpc kernels that d-i's base-installer currently
could try to install on the CD.
- Try to include some sparc kernels on the CD; it's probably better than
including none..
- Revamped the README.html, removing the old manual apt setup
instructions, various references to woody, fixing the link to the LDP
home page, dropping reference to the basically dead non-us section,
removing confusing references to non-free being on the CD, dropping
references to dselect, etc.
- Fix layout of README.txt, adding missing <p>'s after headings.
- Drop README.mirrors and README.non-US from the CDs.
* Steve Langasek
- Add fdisk-udeb to the list of needed debs for alpha
- Use /dev/ram as the root device for aboot (alpha)
* Petter Reinholdtsen
- Updated tasks/README with new location of popularity-contest results.
- Regenereated tasks/popularity-contest-sarge based on the current
data.
- Avoid acorn-fdisk, cfdisk-utf8 and lots of kernels on the first CD.
It should be enough with one kernel package on the first CD.
- Make generated debian-installer list easier to read by adding
arch info at the end of an #ifdef block.
* Santiago Garcia
- Add DI_CODENAME variable make it posible to build cds with a special
debian-installer version.
- Make Makefile remove dedication files except for current version.
- Update debian-installer.* tasks
- Add hppa kernels to generate_di+k_list
- Add sarge boot scripts for hppa
-- Raphael Hertzog <hertzog@debian.org> Wed, 20 Aug 2003 20:17:06 +0200
debian-cd (2.2.16) unstable; urgency=low
* Updated standards-version to 3.6.0.
* Use debhelper 4 (build-depends on it, updated DH_COMPAT).
* WARNING: potato is now mostly unsupported, some cruft has been
removed that may have been useful for generating potato CDs.
* Added debian-installer support. debian-installer is automatically
used if $MIRROR/dists/$CODENAME/main/debian-installer exists.
(however you have to require the inclusion of the udeb via the
task mechanism, cf tasks/debian-installer for the current list)
* Added all files for sarge (in tasks/ data/ and tools/).
* Updated isolinux.bin from syslinux 1.75-1.
* Tollef Fog Heen:
- Make it possible to exclude contrib from the CDs. Useful if you only
have a mirror of main.
- The names of the bootable images have changed on
people.d.o/~tfheen/d-i/images/daily, update download scripts to reflect
that.
* Petter Reinholdtsen:
- Add CONTRIB flag to debian/CONF.sh.
- Add support for BASE_INCLUDE and BASE_EXCLUDE, making files
cdrom/.disk/base_include and .../base_exclude used by
debian-installer.
- Document BOOTDISKS.
- Make disk number available in tools/add-bin-doc.
- In woody, keep the time stamp of smb.bin when copying it to CD.
- Add support for UDEB_INCLUDE and UDEB_EXCLUDE, making files
cdrom/.disk/udeb_include and .../udeb_exclude used by
debian-installer.
* Apply patch from Petter Reinholdtsen for inclusion of
Recommends/Suggests from the base system. Closes: #106903
* Apply nice patch from Santiago Garcia Mantinan for building
"netinst CDs" !
* Don't check dependencies for udebs, they tend to be broken
and we still want them on the CD.
* Put good default values for UDEB_INCLUDE based on the value of
INSTALLER_CD.
* Many updates on the tasks files by Josip Rodin. Removed useless packages
from sarge CD1... and so on.
* Updated hfs.map with .sit info (for powerpc arch). Closes: #186837
-- Raphael Hertzog <hertzog@debian.org> Wed, 20 Aug 2003 19:59:54 +0200
debian-cd (2.2.15) unstable; urgency=low
* Apply patch for mipsel boot support. Closes: #145318
Thanks to Karsten Merker.
* Updated README.sbm with more info provided by Santiago
Marcia Mantinan.
* Reordered some woody task files. Thanks to Philip Charles.
* Added cpp in the Depends field. Closes: #145869
* Fixed error message in Makefile. Closes: #146184
* Updated tools/add_secured to work with all versions of md5sum
(including the one that comes with dpkg >= 1.10).
* Protect the call to add_secured by a stamp file. Closes: #147105
* Provide a customised isolinux image. We don't need to
recommend syslinux now.
* Apply patch from Petter Reinholdtsen to put security updates on the cd.
* Apply patch from Petter Reinholdtsen to preserve timestamps, making
build.sh being able to run with -e set, report reserved space and
the space debootstrap needs. Also, handle boot-floppy directories
without docs.
* Make sure discover, read-edid and mdetect are on the first CD if
possible.
-- Raphael Hertzog <hertzog@debian.org> Tue, 17 Sep 2002 21:18:05 +0200
debian-cd (2.2.14) unstable; urgency=high
* Updated the script to update tasks/base-woody. Closes: #138651
* Anne commited stuff for inclusion of a local security.debian.org.
* Added NOSUGGESTS in a similar way than NORECOMMENDS. Thanks
to Petter Reinholdtsen <pere@hungry.com>.
* Added "decompacted language packs" to the bootable CDs.
Closes: #139179
* Corrected name of kernel s/linux/linux.bin/ (why the hell
do they need to change that name now ...). Closes: #139503
Change has been made for arches where the latest bf are
available. More may need to come for arches like sparc
which are catching up with bf.
* More changes of kernel name in anticipation of the upcoming
boot floppies for sparc & alpha.
* Change the order of flavors in the i386 CD set. First is "idepci",
second "compact", third "bf2.4" and fourth the old default one. At
least we have the language chooser on the first CD but it's still
2.2 based. Reworked the MULTIBOOT code to take this into account.
* Added capability to generate DVD-sized images. Use bc to calculate
disk sizes in build.sh and build_all.sh, and use the textutils
version of md5sum to avoid missing large file support in dpkg
version. Specify the output image sizes in CONF.sh
* Added ISOLINUX code (export ISOLINUX=yes in CONF.sh); this provides a
"rescue floppy like" boot screen that allows choosing between kernel
images, rather than loading the rescue disks directly from the boot
sector.
* Removed obsolete local-variables section from changelog.
* Added default values into CONF.sh for isolinux support.
* Change again the order of the boot images for i386.
1: multiboot (isolinux) 2: vanilla 3: compact 4: idepci 5: bf2.4
* Put TERM=vt102 for vanilla flavor as it seems to fix the borders
of the boxes in a few cases.
* Improved the test to see if we want non-free. Instead of -n "$NONFREE"
it's now "${NONFREE:-0}" != "0" (same for EXTRANONFREE). Maybe
should we do the same for the other boolean environment variables like
LOCAL, SECURITY, SECURED ...
* Changed the test for ISOLINUX and MULTIBOOT to be coherent with the other
boolean variables.
* Dropped old el-torito multiboot support. Documented the choice of
isolinux in README.devel.
* added ramdisk_size=8192 to palo commandline for hppa
* Added empty boot-mips & boot mipsel.
* Updated boot-alpha to conditionalize the inclusion of APB.
* Reworked boot-ia64 to use hardlinks and so 1_NONUS.raw is built properly.
* Reworked post-boot-hppa to hardcode path to palo, and to ensure
1_NONUS.raw is built properly.
* Added Smart Boot Manager image for people who want to boot ISOLINUX
image on machine with BIOS which don't support them.
-- Raphael Hertzog <hertzog@debian.org> Sun, 28 Apr 2002 15:52:32 +0200
debian-cd (2.2.13) unstable; urgency=low
* Add jigdo generation support (see README).
* Automatically add packages listed by local debootstrap. Closes: #131820
* Adapted to new s390 boot-floppies 3.0.19 directory structure (Stefan
Gybas <sgybas@debian.org>).
* Updated boot-i386 for the boot-floppies 3.0.19.
* Don't include the base-images-* directories on the CD. They
are meant for people wishing to install by floppy (who download the
floppy images from the net).
* Corrected the priority to match the priority given in the override file.
* CDs with .disk/kernel_installable have the disks-<arch> directories
and those with .disk/base_installable have all the packages required
by debootstrap.
* Updated base-woody with debootstrap 0.1.17. Closes: #138357
-- Raphael Hertzog <hertzog@debian.org> Sat, 16 Mar 2002 19:53:41 +0100
debian-cd (2.2.12) unstable; urgency=low
* Get it right this time with the MULTIBOOT test ... Closes: #127234
* Correct spelling mistake in README.devel. Closes: #127726
* Make the log output more consistent and offer the possibility
to not force the inclusion of recommended/suggested packages.
Thanks to Petter Reinholdtsen for the patches.
Closes: #127964, #127968
* Undef some automatic variable substitution (like i386)
of cpp causing problems while generating tasks files. Closes: #129044
Thanks again to Petter Reinholdsten.
* Don't fail if Contents-$ARCH files are missing. Closes: #129166
-- Raphael Hertzog <hertzog@debian.org> Sat, 29 Dec 2001 19:57:23 +0100
debian-cd (2.2.11) unstable; urgency=medium
* Changed "==" test by "=" test that works with ash also. Closes: #125727
* Corrected the rules files to remove the .#* files of CVS merges.
Closes: #125728
* Corrected the documentation. Closes: #125729
* Complains about missing Release files. Closes: #126076
-- Raphael Hertzog <hertzog@debian.org> Sun, 16 Dec 2001 04:34:03 +0100
debian-cd (2.2.10) unstable; urgency=low
* first test of multi-boot cdimage for i386 disk #1
You must export MULTIBOOT="yes" in CONF.sh to enable this feature. -jwest
* Removed "ide" boot floppy's flavor. Closes: #120415
* Added support for s390 (Jochen Röhrig <jr@debian.org>).
* Documentation about the fact the environment variables may
pollute your environment after a debian-cd run. Closes: #123289
-- Raphael Hertzog <hertzog@debian.org> Mon, 26 Nov 2001 18:21:50 +0100
debian-cd (2.2.9) unstable; urgency=low
* Added i386 boot blocks for udam100-ext3 to disk 5 -jwest
* Added i386 boot blocks for reiserfs to disk 6 - jwest
* Drop support of slink. Drop support of dpkg-multicd.
* Uses apt-ftparchive and no more dpkg-scan{packages,sources}.
* Does use the extra override file. Closes: #113794
* Remove the use of unzip in boot-alpha. Nobody should use unzip...
* Update yaboot.conf and ofboot.b to conform to current (1.3.4) yaboot (powerpc).
* If using BOOTDISK= pick up docs from there also (Richard Hirst).
* Synced tasks/base-woody with debootstrap 0.1.15.8.
Closes: #119099
* Add kludgy yaboot.conf for potato's broken yaboot.
* ia64, only first disk is bootable, and use symlinks in /install
to save space. rescue.bin is 10MB on ia64. (Richard Hirst)
-- Raphael Hertzog <hertzog@debian.org> Sun, 16 Sep 2001 14:57:22 +0200
debian-cd (2.2.8) unstable; urgency=low
* Be less restrictive on non-US section name (ie accepts non-us too).
* Add support for ia64 (Richard Hirst). Closes: #110553.
* Update the "Components" field of the Release files. Was
causing a bug in debootstrap.
* Add support for hppa (Richard Hirst).
* Removed the last reference to unzip. No more references to lha
either. So debian-cd can go in main.
* Changes for powerpc were made by Ethan Benson. Closes: #104333
-- Raphael Hertzog <hertzog@debian.org> Sun, 19 Aug 2001 13:42:27 +0200
debian-cd (2.2.7) unstable; urgency=low
* Minor fix in tools/woody/installtools.sh
* Disabled the secured stuff by default. Make it configurable
with a environment variable.
* Various other little changes (in particular wrt LOCAL handling).
-- Raphael Hertzog <hertzog@debian.org> Tue, 24 Jul 2001 18:56:33 +0200
debian-cd (2.2.6) unstable; urgency=medium
* Updated tasks/base-woody to be in sync with debootstrap 0.1.15.
* Improved documentation about Official images. Closes: #101578
* Build woody CD set by default now. Updated CONF.sh accordingly.
* Use Digest::MD5 instead of MD5. Depends on libdigest-md5-perl
instead of "libdigest-md5-perl | libmd5-perl". Closes: #104184
-- Raphael Hertzog <hertzog@debian.org> Tue, 19 Jun 2001 00:43:04 +0200
debian-cd (2.2.5) unstable; urgency=low
* Remove (obsolete) -a from mkhybrid call. Changed mkhybrid to mkisofs
since mkhybrid has been superseded by mkisofs. Closes: #97439
* Only includes latest version of a package if a newer version
is provided in a local repository.
* Includes on CD1 packages needed by debootstrap. Closes: #100353
-- Raphael Hertzog <hertzog@debian.org> Sat, 19 May 2001 15:15:29 +0200
debian-cd (2.2.4) unstable; urgency=medium
* All (i386) CD's now have a different kernel from boot-disks.
* Updated pi-makelist, now excludes all of the sparc live filesystem.
* Added Recommends: debianutils because pi-makelist uses tempfile(1)
since 2.2.3; also mentioned this in the debian-cd/YACS README.
* Some minor updates/rewordings in CD's top-level README.
* Typo. tools/add_dirs line #26 changed to if [ -n --jwest
Closes: #79902
* Include a new interactive boot.bat. Closes: #83471
* Corrected tools/apt-selection. Closes: #79903
* Does correctly manage pools wrt Packages files.
* Now depends on grep-dctrl.
* Now creates a $CODENAME-secured tree with Release and Release.gpg
files from the archive. Closes: #93612
* Some esthetic corrections to the Makefile.
* Updated the popularity-contest file.
* Redesigned and updated README to match new www.debian.org style.
* Added exclude feature for source packages and un-exclude feature
for binary packages.
* Updated and reorganized package/popularity lists, as produced by the
"Useful CD 1 Project". More info in tasks/README.
-- Raphael Hertzog <hertzog@debian.org> Sat, 28 Apr 2001 23:56:14 +0200
debian-cd (2.2.3) unstable; urgency=low
* Fixes several bug caused by changes in the way binary-all packages
are referred to in the Packages files. Closes: #76178
* Does now handle sources for a local repository correctly. Closes: #76179
* Fix a bug in make extras. Closes: #76181
* Added a commodity local symlink for old-fashioned tools like multi_cd
which want local packages in dists/local/local. Closes: #76186
* Many thanks to Vladimir Michl who provided me patches for the 4 bug
mentionned above.
* Changed mirror_check to use case insensitive pattern matching for
detecting headers. Closes: #70838
* Documentation updates about the SIZELIMIT stuff and bootable CDs.
Closes: #72067, #68913
* There's still no good reasons to remove the unstable symlink.
Closes: #68477
* OUT doesn't have to be a relative path. In fact, the default shipped
in the CONF.sh file is an absolute path and it does work.
Closes: #75406
-- Raphael Hertzog <hertzog@debian.org> Sat, 4 Nov 2000 15:36:10 +0100
debian-cd (2.2.2) frozen unstable; urgency=low
* Still targeted to frozen. Documentations (README.html on the CD) updates
& other little changes.
* Fixed targets bin-image and src-image to use CD$(CD) instead of $(CD).
* Added "." after -F argument for symlink farm user. Closes: #66599
* Misc changes for woody i386 bootdisks --jwest
* Fixed the patch from Joey. :) ${LOCALDEBS:-$MIRROR} instead of
${LOCALDEBS:-MIRROR}. s/CODNAME/CODENAME/ too. Closes: #66737
* This bug is unreproducable and the submitter didn't respond.
Probably a local configuration error. Closes: #66526
-- Raphael Hertzog <hertzog@debian.org> Fri, 30 Jun 2000 17:50:16 +0200
debian-cd (2.2.1) frozen unstable; urgency=low
* Should go to frozen as well...
* build.sh,build_all.sh: Better guess at size of bin CD 1
* Added the "needed" task file as tasks/forcd1.
* Update for m68k, they should at least build now.
* Include upgrade-{i386,sparc,alpha,m68k} dir when available.
* Updated README.html.in (new version provided by Anne Bezemer).
* Added EXTRANONFREE support. It allows to generate an extra non-free CD.
The first CDs are totally free and the last(s) CD(s) contains
only non-free and possibly some files from contrib.
* Added extra file to help fine tune the CD sizes per archs
* Edited boot-alpha to work (I hope) based on what was available in the
README.txt in boot-floppies
* Modified build_all.sh so that it puts each arch under a subdir and
modified imagesums/pi-makelist to support the subdirs
* Added FORCENONUSONCD1 support - move all non-US packages/sources to
CD#1 of the set. We then make 2 copies of this, one with non-US and
one without. Useful for people wanting to create non-US and US-safe
CDs without having to spend so much disk space.
* Added patch from Joey Hess for LOCALDEBS support. Closes: #66447
* Added patch from Michael Schlueter (corrected cpp call when
FORCENONUSONCD1 was not used)
-- Raphael Hertzog <hertzog@debian.org> Sat, 20 May 2000 23:42:58 +0200
debian-cd (2.2.0) frozen unstable; urgency=low
* The final debian-cd for potato ! Must go to frozen ...
* Changes to tools/potato/boot-sparc for new bootdisk
organization. --jwest
* Changes to /tools/boot/potato/boot-i386 for new bootdisks --jwest
Closes: #59250, #64124
* Added missing semi-colon in the target pi-makelist.
* /install/boot.bat not working because of missing loadlin.exe fixed
* Updates to sparc bootable
* Updates to woody/boot-i386 --jwest
* Add powerpc support for potato (dan).
* Incorporated some documentation (courtesy of J.A. Bezemer) :
README.html & README.txt
* Make translated documentation more easily available. Closes: #64276
* Added arm support (easy, they don't have bootable CD).
-- Raphael Hertzog <hertzog@debian.org> Thu, 18 May 2000 23:59:49 +0200
debian-cd (2.1.92) frozen unstable; urgency=low
* This version goes to frozen since it's used for building potato CD.
Another one will follow once we have the final boot-floppies.
But I already upload this one because I'm getting complaints since
the old package doesn't work with the actual boot-floppies available
on the mirror...
* Added files for woody (yes, people already burn woody CD images)
* Make the second CD bootable on i386 with the "compact" image.
* Changes to installtools.sh, change to check for documentation
directory name by $ARCH.
-> This change will have to be removed when all arch will have synced
boot floppies.
* Changes to tools/potato/boot-i386 for support of the 2.2.3 bootdisks.
Closes: #53529 #58304
* In Makefile, if there are multiple versions of the
bootdisks in the source tree, the section "boot:" seems to get
confused. Not fixed. Temporary solution, move old i386 boot
disks out of the source archive.
* Added a file tasks/popularity-contest listing packages by order of
usefulness (results given by the popularity contest of course). This
file is included at the end of the Debian_potato task in order to
include the packages that are widely used on the first CD if possible.
* Added a bunch of set -e.
* Added pi-makelist target to generate the *.list files used by the
Pseudo Image Kit. Needs isoinfo in the cdwrite package.
* Updated README and README.devel. Explained that the main source
is on CVS and that patch should apply on the CVS tree not on the
source package available on the Debian FTP.
* Added possibility to include local packages on the CD set. Documented
it. Closes: #50640
* Documented the fact that TMP path must be on the same partition than
the mirror. Closes: #59524
-- Raphael Hertzog <hertzog@debian.org> Tue, 7 Mar 2000 19:03:44 +0100
debian-cd (2.1.91) unstable; urgency=low
* Splitted the boot scripts for slink & potato. Updated the Makefile
to handle this.
* Updated the tasks/Debian_potato to use the new task-* packages.
* New boot-i386 which does use resc2880.bin (the tecra image has
been removed since it does no more exist in the latest boot-floppies).
* Can now build CD with bootdisks taken from somewhere else than
the mirror (allow you to use your own boot floppies, notably those
built with translated documentation).
* The documentation from the boot-floppies are now installed
in /install and /doc by the scripts tools/$CODENAME/installtools.sh
It was needed since the documentation of the boot-floppies does
differ from one dist to another ...
* Removed some cruft which is no more needed (master for potato,
status.i386).
* Updated README to explain that the mkhybrid package in Debian
does support the -F option. Closes: #50141
-- Raphael Hertzog <hertzog@debian.org> Thu, 11 Nov 1999 20:50:26 +0100
debian-cd (2.1.90-1) unstable; urgency=low
* Moved to contrib because of the unzip and lha dependencies.
* Corrected the boot-m68k script (bvme600 -> bvme6000).
* YACS 0.5 :
* ----------
* tools/add_dirs: don't create section subdirectories for non-US.
* tools/*: full slink compliance. Should build slink disk even with
non-US. Thanks to the help of Filip Van Raemdonck <mechanix@dma.be>.
* Makefile: added an upgrade target called when building
official_images. It will call tools/$CODENAME/upgrade.sh if possible.
Created this upgrade.sh file for slink.
* YACS can/should generate complete slink images with this release.
Please test. In particular for non-i386 CD images. I want to check
if the scripts to make CD bootables are (still) working.
* tools/apt-selection: removed some bashisms.
* Many data has been splitted by codename. This is to allow
us to build slink and potato CD without much troubles.
* Updated the master file for potato. Added the old one for slink.
* Status file is now automatically generated when a provided one
is not available (data/$CODENAME/status.$ARCH).
* build.sh build_all.sh: convenience scripts to build CD images.
* YACS 0.4 :
* ----------
* New status file for potato i386.
* When including packages listed in the status file check that they
exist before.
* Call dpkg-scansources for generating Sources.gz file on the source
CD. And depends on dpkg-dev (>= 1.4.1.6) to be sure that we have it.
* Add dependency to libdigest-md5-perl.
* list2cds: try to select all suggested/recommended packages not only from
packages explicitely selectionned but also from packages listed
in dependencies.
* list2cds: many little checks added, now generates a log.list2cds
file (in the temp dir).
* YACS 0.3 :
* ----------
* This version has herited nothing from the previous debian-cd
package only the changelog has been added.
* It can now build sources CD.
* This package does now replace slink_cd and the old debian-cd.
I'll close the bugs (after checking that the new debian-cd behaves
correctly with the bug report situation) affected to those packages.
* The Packages.cd files are generated correctly (the same way than
slink_cd did).
* Added the good dependencies. Closes: #25710, #36109, #27758
* Some bugs are no more applicable. Closes: #24708, #25195, #31044, #24418
Closes: #36115, #36228
* No source URL in copyright file since this is a Debian native
package. Closes: #36111
* Full GPL isn't included. Closes: #36113
* Missing newlines added. Closes: #36114
* The README is a good documentation for building CD. Closes: #17540
* Added the support for hooks. Closes: #36112
* Added a link index.html -> install.html. Closes: #38402
* Files are better placed. Closes: #36110
* Rebuilding the Contents file is of no use. And if you really need
it, you can do it yourself with the hook system. Closes: #36116
* Internationalization is a boot-floppies problem. Closes: #25210
* Tried miniunz but it lacks important feature like -L ... still
uses unzip. And recommends it.
-- Raphael Hertzog <hertzog@debian.org> Thu, 29 Jul 1999 18:26:09 +0200
debian-cd (2.0.2) unstable; urgency=low
* get rid of .html from the errata URL
* add contents to README.official
-- Philip Hands <phil@hands.com> Fri, 24 Jul 1998 00:09:22 +0100
debian-cd (2.0.1) unstable; urgency=low
* add the copyright/licence intro from the install docs to the main readme
* add a reference to http://www.debian.org/2.0/errata.html to the main README
* generally tidy up README's
-- Philip Hands <phil@hands.com> Thu, 23 Jul 1998 18:41:23 +0100
debian-cd (2.0.0) unstable; urgency=low
* Suggest cdrecord (rather than Depend) since it's not needed to create
images, only to write them.
* get rid of purge_duff_disks hack
* fix timestamp to use 24 hour clock and GMT
* add README.contrib to all CD images
-- Philip Hands <phil@hands.com> Wed, 22 Jul 1998 12:16:16 +0100
debian-cd (1.99.18) unstable; urgency=low
* add dependencies (closes: #9072, #19116)
* add $(init-dists) for contrib (closes: #24465)
* make check_mirror.pl able to deal with md5sums.gz (closes: 24418)
-- Philip Hands <phil@hands.com> Fri, 17 Jul 1998 22:06:16 +0100
debian-cd (1.99.17) unstable; urgency=low
* add -p option to tecra boot mkdir
* add missing define for ``install-source-x11''
* fix making of .mkisofsrc
-- Philip Hands <phil@hands.com> Wed, 15 Jul 1998 15:16:48 +0100
debian-cd (1.99.16) unstable; urgency=low
* add hack to get rid of old 2.0.6 disks
-- Philip Hands <phil@hands.com> Wed, 8 Jul 1998 17:46:18 +0100
debian-cd (1.99.15) frozen unstable; urgency=low
* separate boot/ dir to get boot image near the start of the ISO image
resulting in bootable CD's for all (or so I hope)
* rework makefiles using defines instead of targets, and generally tidy up
* fix image-md5sum and image-date targets
-- Philip Hands <phil@hands.com> Wed, 8 Jul 1998 13:29:52 +0100
debian-cd (1.99.14-4) frozen unstable; urgency=low
* make mkisofs-source use resc1440tecra.bin as boot image (rather than the
cdboot.bin hack)
-- Philip Hands <phil@hands.com> Tue, 7 Jul 1998 14:13:54 +0100
debian-cd (1.99.14-3) frozen unstable; urgency=low
* fix typo in mkisofs-source target
-- Philip Hands <phil@hands.com> Tue, 7 Jul 1998 14:03:34 +0100
debian-cd (1.99.14-2) frozen unstable; urgency=low
* use the normal resc1440 images for CD booting, since they are now built
with syslinux -s
* get rid of binary-all from the source image
-- Philip Hands <phil@hands.com> Tue, 7 Jul 1998 13:51:23 +0100
debian-cd (1.99.14-1) frozen unstable; urgency=low
* This should really go in hamm, so that the scripts to build the CD's
end up on the CD's. Of course this will probably require a few attempts
before the scripts here settle down, because other changes are still being
made to hamm that affect these.
* edit some README's and Configuration defaults. Done with a -1 version
so my diff's come out in the diff file
* put the hamm --> ../hamm link back into dists
-- Philip Hands <phil@hands.com> Fri, 3 Jul 1998 11:31:26 +0100
debian-cd (1.99.14) stable unstable; urgency=low
* use Andreas Jellinghaus's makefile system for building CD's (starting with
* 0.14)
-- Philip Hands <phil@hands.com> Tue, 30 Jun 1998 22:15:59 +0100
debian-cd (1.0.0) stable unstable; urgency=low
* What was in vars.sh is now individual files per variable in the
vars/ directory.
* Various edits from the experience of making the Official CDs.
-- Bruce Perens <bruce@debian.org> Sun, 10 Aug 1997 21:02:17 -0700
debian-cd (0.1.6) frozen unstable; urgency=low
* Remove quotes from strings in .mkisofsrc, they were being
put on the disc. Pad filesystems for Linux read-ahead bug.
-- Bruce Perens <bruce@debian.org> Fri, 13 Jun 1997 10:08:42 -0700
debian-cd (0.1.5) frozen unstable; urgency=low
* Put vars.sh in debian/conffiles, so that a user's altered one
will not be over-written.
* boot.bat was broken.
-- Bruce Perens <bruce@debian.org> Fri, 30 May 1997 10:46:33 -0700
debian-cd (0.1.4) frozen unstable; urgency=low
* Add COLOPHON.txt, a readme about how the CD was produced.
This is my last release before going on vacation, if anything
needs to be fixed in this package for 1.3, someone else must
fix it.
-- Bruce Perens <bruce@debian.org> Wed, 30 Apr 1997 12:35:02 -0700
debian-cd (0.1.3) frozen unstable; urgency=low
* Add SOURCE.txt, a readme about source-code availability, to the
binary CD. Make distribution both frozen and unstable.
-- Bruce Perens <bruce@debian.org> Wed, 23 Apr 1997 23:22:37 -0700
debian-cd (0.1.2) unstable; urgency=low
* Add El Torito bootable-CD patches from Helmut Geyer.
-- Bruce Perens <bruce@debian.org> Sun, 23 Apr 2000 10:31:08 -0700
debian-cd (0.1.1) unstable; urgency=low
* Change architecture to "all".
-- Bruce Perens <bruce@debian.org> Fri, 18 Apr 1997 22:51:36 -0700
debian-cd (0.1.0) unstable; urgency=low
* Initial Release.
-- Bruce Perens <bruce@debian.org> Fri, 18 Apr 1997 22:20:51 -0700