debian-cd-clone/CONF.sh

336 lines
12 KiB
Bash

#
# This file will have to be sourced where needed
#
# Unset all optional variables first to start from a clean state
unset NONUS || true
unset FORCENONUSONCD1 || true
unset NONFREE || true
unset CONTRIB || true
unset EXTRANONFREE || true
unset LOCAL || true
unset LOCALDEBS || true
unset SECURED || true
unset SECURITY || true
unset BOOTDIR || true
unset BOOTDISKS || true
unset SYMLINK || true
unset COPYLINK || true
unset MKISOFS || true
unset MKISOFS_OPTS || true
unset ISOLINUX || true
unset EXCLUDE || true
unset SRCEXCLUDE || true
unset NORECOMMENDS || true
unset NOSUGGESTS || true
unset DOJIGDO || true
unset JIGDOTEMPLATEURL || true
unset JIGDOFALLBACKURLS || true
unset JIGDOINCLUDEURLS || true
unset JIGDOSCRIPT || true
unset JIGDO_OPTS || true
unset DEFBINSIZE || true
unset DEFSRCSIZE || true
unset FASTSUMS || true
unset PUBLISH_URL || true
unset PUBLISH_NONUS_URL || true
unset PUBLISH_PATH || true
unset UDEB_INCLUDE || true
unset UDEB_EXCLUDE || true
unset BASE_INCLUDE || true
unset BASE_EXCLUDE || true
unset INSTALLER_CD || true
unset MAXCDS || true
unset SPLASHPNG || true
unset OMIT_MANUAL || true
unset OMIT_RELEASE_NOTES || true
# The debian-cd dir
# Where I am (hoping I'm in the debian-cd dir)
export BASEDIR=`pwd`
# Building etch cd set ...
export CODENAME=sarge
# By default use Debian installer packages from $CODENAME
if [ ! "$DI_CODENAME" ]
then
export DI_CODENAME=$CODENAME
fi
# If set, controls where the d-i components are downloaded from.
# This may be an url, or "default", which will make it use the default url
# for the daily d-i builds. If not set, uses the official d-i images from
# the Debian mirror.
#export DI_WWW_HOME=default
# Version number, "2.2 r0", "2.2 r1" etc.
export DEBVERSION="3.1"
# Official or non-official set.
# NOTE: THE "OFFICIAL" DESIGNATION IS ONLY ALLOWED FOR IMAGES AVAILABLE
# ON THE OFFICIAL DEBIAN CD WEBSITE http://cdimage.debian.org
export OFFICIAL="Unofficial"
#export OFFICIAL="Official"
#export OFFICIAL="Official Beta"
# ... for arch
CPU=`dpkg-architecture -qDEB_HOST_DPKG_CPU 2>/dev/null || true`
if [ "$CPU"x = ""x ] ; then
CPU=`dpkg-architecture -qDEB_HOST_ARCH`
fi
KERNEL=`dpkg-architecture -qDEB_HOST_DPKG_OS 2>/dev/null || true`
if [ "$KERNEL"x = ""x ] ; then
KERNEL=linux
fi
if [ $KERNEL = linux ] ; then
ARCH=$CPU
else
ARCH="$KERNEL-$CPU"
fi
export CPU KERNEL ARCH
# IMPORTANT : The 4 following paths must be on the same partition/device.
# If they aren't then you must set COPYLINK below to 1. This
# takes a lot of extra room to create the sandbox for the ISO
# images, however. Also, if you are using an NFS partition for
# some part of this, you must use this option.
# Paths to the mirrors
export MIRROR=/mirror/debian
# Comment the following line if you don't have/want non-US
#export NONUS=/ftp/debian-non-US
# And this option will make you 2 copies of CD1 - one with all the
# non-US packages on it, one with none. Useful if you're likely to
# need both.
#export FORCENONUSONCD1=1
# Path of the temporary directory
export TDIR=/mirror/tmp
# Path where the images will be written
export OUT=/mirror/debian-cd-test
# Where we keep the temporary apt stuff.
# This cannot reside on an NFS mount.
export APTTMP=/mirror/tmp/apt
# Do I want to have NONFREE merged in the CD set
# export NONFREE=1
# Do I want to have CONTRIB merged in the CD set
export CONTRIB=1
# Do I want to have NONFREE on a separate CD (the last CD of the CD set)
# WARNING: Don't use NONFREE and EXTRANONFREE at the same time !
# export EXTRANONFREE=1
# If you have a $MIRROR/dists/$CODENAME/local/binary-$ARCH dir with
# local packages that you want to put on the CD set then
# uncomment the following line
# export LOCAL=1
# If your local packages are not under $MIRROR, but somewhere else,
# you can uncomment this line and edit to to point to a directory
# containing dists/$CODENAME/local/binary-$ARCH
# export LOCALDEBS=/home/joey/debian/va/debian
# If you want a <codename>-secured tree with a copy of the signed
# Release.gpg and files listed by this Release file, then
# uncomment this line
# export SECURED=1
# Where to find the security patches. This directory should be the
# top directory of a security.debian.org mirror.
#export SECURITY="$TOPDIR"/debian/debian-security
# Sparc only : bootdir (location of cd.b and second.b)
# export BOOTDIR=/boot
# Symlink farmers should uncomment this line :
# export SYMLINK=1
# Use this to force copying the files instead of symlinking or hardlinking
# them. This is useful if your destination directories are on a different
# partition than your source files.
# export COPYLINK=1
# Options
# export MKISOFS=mkisofs
# export MKISOFS_OPTS="-r" #For normal users
# export MKISOFS_OPTS="-r -F ." #For symlink farmers
# ISOLinux support for multiboot on CD1 for i386
export ISOLINUX=1
# uncomment this to if you want to see more of what the Makefile is doing
export VERBOSE_MAKE=1
# uncoment this to make build_all.sh try to build a simple CD image if
# the proper official CD run does not work
ATTEMPT_FALLBACK=yes
# Set your disk size here in MB. Used in calculating package and
# source file layouts in build.sh and build_all.sh. Defaults are for
# CD-R, try ~4600 for DVD-R.
export DEFBINSIZE=630
export DEFSRCSIZE=635
# We don't want certain packages to take up space on CD1...
#export EXCLUDE="$BASEDIR"/tasks/exclude-$CODENAME
# ...but they are okay for other CDs (UNEXCLUDEx == may be included on CD >= x)
#export UNEXCLUDE2="$BASEDIR"/tasks/unexclude-CD2-$CODENAME
# Any packages listed in EXCLUDE but not in any UNEXCLUDE will be
# excluded completely.
# We also exclude some source packages
#export SRCEXCLUDE="$BASEDIR"/tasks/exclude-src-$CODENAME
# Set this if the recommended packages should be skipped when adding
# package on the CD. The default is 'false'.
export NORECOMMENDS=1
# Set this if the suggested packages should be skipped when adding
# package on the CD. The default is 'true'.
#export NOSUGGESTS=1
# Produce jigdo files:
# 0/unset = Don't do jigdo at all, produce only the full iso image.
# 1 = Produce both the iso image and jigdo stuff.
# 2 = Produce ONLY jigdo stuff by piping mkisofs directly into jigdo-file,
# no temporary iso image is created (saves lots of disk space).
# NOTE: The no-temp-iso will not work for (at least) alpha and powerpc
# since they need the actual .iso to make it bootable. For these archs,
# the temp-iso will be generated, but deleted again immediately after the
# jigdo stuff is made; needs temporary space as big as the biggest image.
#export DOJIGDO=2
#
# jigdo-file command & options
# Note: building the cache takes hours, so keep it around for the next run
#export JIGDOCMD="/usr/local/bin/jigdo-file --cache=$HOME/jigdo-cache.db"
#
# HTTP/FTP URL for directory where you intend to make the templates
# available. You should not need to change this; the default value ""
# means "template in same dir as the .jigdo file", which is usually
# correct. If it is non-empty, it needs a trailing slash. "%ARCH%"
# will be substituted by the current architecture.
#export JIGDOTEMPLATEURL=""
#
# Name of a directory on disc to create data for a fallback server in.
# Should later be made available by you at the URL given in
# JIGDOFALLBACKURLS. In the directory, two subdirs named "Debian" and
# "Non-US" will be created, and filled with hard links to the actual
# files in your FTP archive. Because of the hard links, the dir must
# be on the same partition as the FTP archive! If unset, no fallback
# data is created, which may cause problems - see README.
#export JIGDOFALLBACKPATH="$(OUT)/snapshot/"
#
# Space-separated list of label->URL mappings for "jigdo fallback
# server(s)" to add to .jigdo file. If unset, no fallback URL is
# added, which may cause problems - see README.
#export JIGDOFALLBACKURLS="Debian=http://myserver/snapshot/Debian/ Non-US=http://myserver/snapshot/Non-US/"
#
# Space-separated list of "include URLs" to add to the .jigdo file.
# The included files are used to provide an up-to-date list of Debian
# mirrors to the jigdo _GUI_application_ (_jigdo-lite_ doesn't support
# "[Include ...]").
export JIGDOINCLUDEURLS="http://cdimage.debian.org/debian-cd/debian-servers.jigdo"
#
# $JIGDOTEMPLATEURL and $JIGDOINCLUDEURLS are passed to
# "tools/jigdo_header", which is used by default to generate the
# [Image] and [Servers] sections of the .jigdo file. You can provide
# your own script if you need the .jigdo file to contain different
# data.
#export JIGDOSCRIPT="myscript"
# If set, use the md5sums from the main archive, rather than calculating
# them locally
export FASTSUMS=1
# A couple of things used only by publish_cds, so it can tweak the
# jigdo files, and knows where to put the results.
# You need to run publish_cds manually, it is not run by the Makefile.
export PUBLISH_URL="http://cdimage.debian.org/jigdo-area"
export PUBLISH_NONUS_URL="http://non-US.cdimage.debian.org/jigdo-area"
export PUBLISH_PATH="/home/jigdo-area/"
# Specify files and directories to *exclude* from jigdo processing. These
# files on each CD are expected to be different to those on the mirror, or
# are often subject to change. Any files matching entries in this list will
# simply be placed straight into the template file.
export JIGDO_EXCLUDE="'README*' /doc/ /md5sum.txt /.disk/ /pics/ 'Release*' 'Packages*' 'Sources*'"
# Specify files that MUST match entries in the externally-supplied
# md5-list. If they do not, the CD build process will fail; something
# must have been corrupted. Replaces the old mirrorcheck code.
export JIGDO_INCLUDE="/pool/"
# Specify the minimum file size to consider for jigdo processing. Any files
# smaller than this will simply be placed straight into the template file.
export JIGDO_OPTS="-jigdo-min-file-size 0"
for EXCL in $JIGDO_EXCLUDE
do
JIGDO_OPTS="$JIGDO_OPTS -jigdo-exclude $EXCL"
done
for INCL in $JIGDO_INCLUDE
do
JIGDO_OPTS="$JIGDO_OPTS -jigdo-force-md5 $INCL"
done
# Where to find the boot disks
#export BOOTDISKS=$TOPDIR/ftp/skolelinux/boot-floppies
# File with list of packages to include when fetching modules for the
# first stage installer (debian-installer). One package per line.
# Lines starting with '#' are comments. The package order is
# important, as the packages will be installed in the given order.
#export UDEB_INCLUDE="$BASEDIR"/data/$CODENAME/udeb_include
# File with list of packages to exclude as above.
#export UDEB_EXCLUDE="$BASEDIR"/data/$CODENAME/udeb_exclude
# File with list of packages to include when running debootstrap from
# the first stage installer (currently only supported in
# debian-installer). One package per line. Lines starting with '#'
# are comments. The package order is important, as the packages will
# be installed in the given order.
#export BASE_INCLUDE="$BASEDIR"/data/$CODENAME/base_include
# File with list of packages to exclude as above.
#export BASE_EXCLUDE="$BASEDIR"/data/$CODENAME/base_exclude
# Only put the installer onto the cd (set NORECOMMENDS,... as well).
# INSTALLER_CD=0: nothing special (default)
# INSTALLER_CD=1: just add debian-installer (use TASK=tasks/debian-installer-$CODENAME)
# INSTALLER_CD=2: add d-i and base (use TASK=tasks/debian-installer+kernel-$CODENAME)
#export INSTALLER_CD=2
# Parameters to pass to kernel when the CD boots. Not currently supported
# for all architectures.
#export KERNEL_PARAMS="DEBCONF_PRIORITY=critical"
# If set, limits the number of binary CDs to produce.
# export MAXCDS=1
# If set, overrides the boot picture used.
#export SPLASHPNG="$BASEDIR/data/$CODENAME/splash-img.png"
# Used by build.sh to determine what to build, this is the name of a target
# in the Makefile. Use bin-official_images to build only binary CDs. The
# default, official_images, builds everything.
IMAGETARGET=bin-official_images
# Set to 1 to save space by omitting the installation manual.
# If so the README will link to the manual on the web site.
#export OMIT_MANUAL=1
# Set to 1 to save space by omitting the release notes
# If so we will link to them on the web site.
export OMIT_RELEASE_NOTES=1
# Set this to override the defaul location
#export RELEASE_NOTES_LOCATION="http://www.debian.org/releases/$CODENAME"