4a56e9cf12
Finish refactoring, and make x86 CDs bootable again. Oops
2010-09-18 00:56:54 +00:00
a24fa2e1c5
More tweaks for the kFreeBSD boot code: move boot files into boot$N
2010-09-15 12:16:35 +00:00
9fef487e9d
* Fix support for alternative boot splash images. Thanks to Tony Awtrey
...
for the patch. Closes : #537368
2010-09-14 22:49:12 +00:00
22bdd161f8
Remove old mention of different boot methods for CD1 and CD2; we've
...
not supported the alternative CD2 boot in *ages*.
2010-09-14 22:28:53 +00:00
6752a1634a
* Update loadlin kernel parameters to match d-i values. Thanks to Samuel
...
Thibault for the patch. Closes : #594267
2010-09-14 12:30:05 +00:00
70f52017d3
Tweak definitions for kfreebsd daily image locations again
2010-08-20 15:58:15 +00:00
c67c31fc03
Tweak definitions for daily image locations so that the push_di_to_cdbuild script can find them
2010-08-20 15:52:56 +00:00
771f754516
Add support for the kfreebsd ports. Closes : #593629
2010-08-20 15:04:23 +00:00
5018528099
Fix for the doppelganger patch
2010-07-08 10:23:51 +00:00
b5ec72640c
Patch from Ian Campbell <ijc@hellion.org.uk>:
...
Detect duplicates in the extra images used for installation
Several files included under install.{386,amd} are actually identical to
others. Rather than duplicating them attempt to detect this and hardlink
them.
Since images can be downloaded from the web at build time it is not
always possible to detect identical files by looking for the symlinks
created by the debian-installer build. Instead we pass a list of
potential "doppelgangers" to extra_image each of which is checked for
similarity to the new image.
I added gtk/vmlinuz (which is always the same as plain vmlinuz) which
although not necessary makes it more explicit which kernel goes with the
initrd at very little cost.
Hardlinks are used in preference to symlinks since these are expected to
work better with isolinux and the Xen tools.
2010-07-07 23:49:46 +00:00
370193149e
More changes needed for the netinst including firmware. Set up build "C" to work the same as build "2" in most respects.
2010-05-27 13:33:26 +00:00
d961fb7e0e
s390: specify offset and size of the initrd for booting from CD
...
The old setup worked fine with an ext2 initrd but fails with an initramfs,
either because autodetection is different for initramfs or because of kernel
changes (I suspect the first).
This means that booting s390 from CD has not worked since sometime during the
Etch release cycle, even though support for booting from CD was only added
early in that cycle - ouch.
For booting with an initramfs initrd we apparently need to specify its
offset and size at specific memory locations.
Change is based on SuSE's CD boot. Many thanks to Adam Thornton, Mark Post
(of Novell) and Bastian Blank for providing the pointers to the missing bits.
This fixes booting from CD using the d390.ins file; tested in Hercules for
both Lenny (31-bit kernel) and Squeeze (64-bit kernel).
Booting from CD using the d390.tdf file may still be broken (if possible at
all) as I have no idea how to test that.
2009-10-11 18:12:06 +00:00
d12d861d0d
Fix syntax errors in tools/boot/{lenny,squeeze}/boot-m68k (thanks to
...
lintian).
2009-09-17 14:16:21 +00:00
d8a3faa32f
* Fallback looking for syslinux/silo/yaboot in $CODENAME when $DI_CODENAME
...
didn't gave any result. This is useful when using partial mirrors built by
simple-cdd while trying to build a Debian CD using a newer d-i (in my case
etch CD with lenny d-i).
* Use dpkg --fsys-tarfile instead of ar for extracting files from deb
packages. The previous invocation could have failed for packages using
something other than gzip compression.
2009-08-18 15:01:25 +00:00
fe2334131d
Add a Xen variant on i386 and amd64
...
Patch from Ian Campbell.
i386 Xen guests require a PAE (686-bigmem) kernel in order to
run. Therefore this variant includes the relevant installer kernel and
ramdisk in install.386/xen as well as suitable kernel udebs and proper
debs for the installed system.
amd64 Xen has no similar requirement but we include the kernels under
install.amd/xen in order to have a consistent path under both
architectures.
2009-08-09 14:33:00 +00:00
e9c608e6b7
Add support for producing disks with (optional) extra variants
...
This patch from Ian Cambell adds the generic support code:
* CONF.sh: Add $(VARIANTS) configuration variable.
* eash-build.sh: Add command line parameter to enable variants.
* Makefile: Define VARIANT_xxx when preprocessing package list.
* boot/?/common.sh: Add a function for checking if a variant is enabled.
* generate_di_list: Allow variant overrides in udeb exclusion list.
Variant support is documented in docs/README.variants
The intention is to use this support to add support for installing a
Xen guest from an ISO image.
The approach to use varriants was originally suggested by Frans Pop.
2009-08-09 14:32:55 +00:00
bee30ee646
boot-x86: move creation of install.bat out of extra_image
...
Patch from Ian Campbell.
2009-08-09 14:32:45 +00:00
276bf8f8ac
Don't fetch D-I images for the prep subarchitecture
...
prep has not been available for a long time.
Thanks to Ian Campbell for pointing that out.
2009-08-07 10:34:15 +00:00
129713f1b2
Fix syntax error
2009-08-07 10:34:11 +00:00
83fcacb0f7
Don't download floppy D-I images for i386; they're no longer available
2009-08-04 20:34:23 +00:00
ed19bfa438
Avoid unnecessary download of D-I images for x86 and alpha
...
Only do boot disk stuff for x86 and alpha if the image is supposed to be
bootable. For i386 and amd64 this avoids downloading D-I images for all
30+ CDs in a full set.
2009-08-04 20:15:32 +00:00
c6e842e393
Display message for unsupported sparc subarchitectures
2009-06-13 14:52:42 +00:00
fc09043feb
Better do an explicit check for D-I syslinux config version
2009-05-31 23:53:55 +00:00
617497fff0
x86: fail build if old syslinux config is detected
2009-05-31 22:45:12 +00:00
ce3806e8af
Split out code for workaround for #505243 to x86-desktop function library
...
Cleans up the main boot-x86 script a bit.
2009-05-31 22:45:09 +00:00
d15cc10746
x86: update syslinux config manipulation for version 2.0
...
Adjust x86 boot scripts for new version (2.0) of framework in D-I for
creation of syslinux configuration files. Essentially the new version
is a backport of what was already implemented in debian-cd before the
release of Lenny and allows a significant simplification.
There are no significant changes in generated CD/DVD images.
2009-05-31 22:45:05 +00:00
d5479c0814
Re-add code to generate install.bat on x86 machines. Thanks to Samuel Thibault
...
for the patch. Closes : #518807
2009-05-16 19:57:17 +00:00
c875c30056
ia64 dailies moved to d-i.d.o
2009-05-05 21:50:23 +00:00
5e62e91e68
Re-disable mipsel bootable cd code: it's just failing solidly
2009-04-27 16:14:45 +00:00
ef8a3fd518
Update powerpc dailies to the d-i.debian.org ones
2009-04-26 16:42:22 +00:00
d0bd2117be
boot-x86 gets sourced: remove shebang; improve whitespace consistency
2009-04-20 12:11:27 +00:00
0bf1b210cd
boot-x86 gets sourced: remove shebang; improve whitespace consistency
2009-04-20 11:50:42 +00:00
b9730d6ab1
use general path as specific one seems to fail
2009-04-08 20:28:52 +00:00
799a06f4c2
Cope with changes to d-i daily-build mirroring
2009-04-07 23:31:03 +00:00
2c0136b79f
hppa dailies moved to d-i.debian.org
2009-04-07 18:07:04 +00:00
396633af06
Reenable mipsel with ok from Sledge to find out if it works
2009-04-07 13:52:51 +00:00
7a2d35f38c
Moved some images to d-i.debian.org.
2009-04-07 13:43:59 +00:00
e08830966d
Luk Claes has taken over alpha, amd64, mips, and mipsel daily d-i
...
builds.
2009-03-26 01:54:41 +00:00
27c98b9a17
Add support for and update to squeeze
...
The Debian version for squeeze has already been set:
http://lists.debian.org/debian-release/2009/01/msg00682.html
2009-02-15 22:42:47 +00:00
132bae8583
Re-add the tools directory on amd64 and i386 disc #1
2009-02-14 12:16:11 +00:00
7f320fed82
x86-desktop.sh: improve comment
2009-01-30 05:00:20 +00:00
69e3f1fa76
Clean up D-I Lenny RC1 compatibility code
2009-01-30 05:00:16 +00:00
5032d25183
Drop support for ISOLINUX_DEFAULT
...
This environment variable was used by simple-cdd to force the default
installation option to the graphical installer. Now that we have the
syslinux VESA menu, the option has become rather pointless.
See #512303 for discussion.
2009-01-30 05:00:09 +00:00
33ec58d1a5
sparc: ensure the default 'install' option also gets KERNEL_PARAMS set
...
The current code will add KERNEL_PARAMS only for boot options that have
an existing "append=" line, but that leaves the default option without it.
2009-01-20 00:39:09 +00:00
dc3927d14c
Add support for a separate 'GNOME desktop environment' CD
...
This new task is mostly added for completeness. Main difference with
the default task file is that no server tasks are included.
2008-12-05 14:12:32 +00:00
31e8cfd687
Ensure working boot config for light/all desktops for arches other than x86
2008-12-05 14:12:26 +00:00
2225676ffe
Add support to create an 'all desktops' DVD
...
Include all four desktop environments supported by tasksel (GNOME, KDE,
LXDE and Xfce).
On x86 also add an option in the isolinux menu (under Advanced options)
to select which DE to install; GNOME remains default.
2008-12-05 14:12:24 +00:00
5b750a3810
Add support for a 'light desktop environment' CD (LXDE + Xfce)
...
Supports installation of either an xfce or an lxde desktop environment.
For now use B as identifier for INSTALLER_CD in contrib/testingcds.
Includes a framework to manipulate the isolinux configuration for x86 so
that a user can select which desktop he wishes to install.
2008-12-05 14:12:21 +00:00
3e2d5841be
Avoid build error when building full set of multi-arch i386/amd64 DVDs
2008-12-05 14:12:04 +00:00
c9c4150758
Don't add 'desktop=' to append line in instsel.cfg
2008-12-05 14:11:58 +00:00
5d95644996
boot-hppa: stop passing redundant boot parameters
...
With current initramfs support neither root= nor ramdisk_size= are
needed anymore.
2008-12-05 09:08:23 +00:00
ae69a5b14e
boot-hppa: support KERNEL_PARAMS
...
This is mainly to have the desktop= option passed correctly.
Also switch to space separation in -hppa-cmdline for consistency with
other architectures.
2008-12-05 09:08:20 +00:00
9ed57cc189
Fix x86 m-a breakage in workaround due to file renames
2008-11-26 12:46:58 +00:00
03adf99b41
Prepare for *text.cfg to *txt.cfg rename by D-I
2008-11-23 21:34:39 +00:00
4c0e41e465
* Add support for tracking which packages we've extracted binaries from,
...
so that we can archive them (both binaries and sources). If we need
anything, we will list it in CD$N.pkgs_extracted so that external
scripts can pick it up and do whatever's needed.
* Minor changes to the interface of tools/which_deb to accommodate that:
now just lists the files *within* the mirror; it's up to callers to
prepend ${MIRROR} as needed.
2008-11-23 18:19:25 +00:00
16f9407423
Prepare for adamd*.cfg to amdad*.cfg rename by D-I
2008-11-23 11:53:57 +00:00
bc419dbf37
Workaround issue with isolinux on amd64/i386 multi-arch images
...
Modify the syslinux configuration for amd64/i386 multi-arch images
and use ifcpu64.c32 to autodetect 32/64-bit systems when a user hits
enter from the isolinux help screens.
Based on research done and info provided by Franklin Piat.
2008-11-19 16:08:22 +00:00
262e02ffca
Fix i386/amd64 multi-arch support
...
Currently the isolinux configuration only gets created correctly if the
two arches are specified in the order "amd64 i386". Change the lenny x86
boot script so it works the other way around too.
2008-11-15 01:08:15 +00:00
a8f0d9d14b
Remove remaining remnants of pre-split-config support
2008-11-15 01:08:12 +00:00
88824982ba
Fix error in expansion of %ARCH% variables in D-I image location envvars
2008-11-14 20:14:35 +00:00
1a47dd2a93
Avoid adding an EOL at the end of f3/f4 syslinux help files
2008-11-13 00:23:16 +00:00
e37c9d5a1f
Indentation fix
2008-11-13 00:23:14 +00:00
5beea509c7
Improve code readability
2008-11-12 20:33:42 +00:00
747426afb6
More no longer needed compatibility code cleanup
2008-11-12 20:33:39 +00:00
bac7536f0f
Clean up no longer needed compatibility code in lenny x86 boot script
2008-11-12 18:06:29 +00:00
5aa7863d82
Also extract isolinux.bin from the syslinux package in the case of etch
...
CD images (since it's no more provided by debian-cd itself).
2008-11-07 16:32:06 +00:00
7b28512cf9
Don't try to copy sbm on etch CD images as it got removed.
2008-11-07 15:53:36 +00:00
bb9fad3216
Allow multi-arch builds using D-I images from official mirrors or local D-I images
...
This is made possible by allowing to include a "%ARCH%" placeholder in the
environment variables DI_WWW_HOME and DI_DIR which is expanded to the correct
value at runtime.
Supported for Etch and later.
2008-10-14 08:22:00 +00:00
07a91b45e3
Drop support for building Sarge CDs
2008-10-14 08:02:21 +00:00
45617b2d30
* Support KERNEL_PARAMS for powerpc, alpha and sparc ( Closes : #416230 )
...
Thanks to Vagrant Cascadian for the patch.
2008-10-12 23:30:19 +00:00
9202a3e6e8
Also remove advanced syslinux config files for gtk
...
Note that AFAICT removing these files is unnecessary as they should not
be included in the tarball if the file f3.txt.withgtk is not present.
2008-09-21 22:02:22 +00:00
1dd8261809
Update for syslinux config file rename in D-I
...
The files (ad)amd.cfg were renamed to (ad)amdtext.cfg for consistency.
2008-09-21 22:02:10 +00:00
704a350c35
Make sure directory to unpack syslinux in exists
...
Also make indentation consistent
2008-09-18 18:26:14 +00:00
3580191792
Remove all mention of sbm; no longer needed
2008-09-16 15:29:55 +00:00
60dbf627e2
* Major licensing problem cleanup: ( Closes : #497270 )
...
+ Remove binary blobs from the package; pull those files from the
.debs in the archive as needed (isolinux.bin, vesamenu.c32)
+ sbm.bin *not* yet worked out, so drop it for now
+ Pull out the code to find the right deb and put it in a new helper
shell script (tools/which_deb), called from Makefile and boot-* as
needed.
2008-09-15 23:09:18 +00:00
b598c30a47
* Add the "-joliet-long" option when making images with Joliet names.
...
Some packages with ridiculously long names are not unique in the
first 64 characters, so normal Joliet sorting fails.
2008-09-08 21:53:45 +00:00
b402ea3ba7
* Applied patch from Robert Millan <rmh@aybabtu.com> to allow choice of
...
desktop when building for win32-loader. Closes : #491300 .
2008-07-29 17:29:32 +00:00
787f433fe6
Correct location of images for ia64
2008-07-16 20:02:15 +00:00
311d0a1273
Daily builds for ia64 have moved
2008-07-16 20:02:11 +00:00
76dab60727
Daily builds for m68k have moved
2008-07-16 20:02:08 +00:00
b4fd0dfd9b
use isolinux rather than
2008-06-08 22:32:11 +00:00
55bd8d23b1
better anchor for search
2008-06-08 22:17:30 +00:00
83ac3d95a3
Add support for custom kernel params for all isolinux configurations
2008-06-08 22:13:42 +00:00
977746d1c1
Path to sparc daily builds has changed.
2008-06-05 22:45:11 +00:00
c580e320e8
Start to add armel support.
2008-05-04 17:38:52 +00:00
f91df1f669
Add support for a split syslinux.cfg file, which will later be provided
...
to support the syslinux vesa menu.
2008-05-01 20:52:03 +00:00
8ced9d59fc
Disable the other m68k option
2008-04-01 23:12:40 +00:00
5747f296cb
Temporarily disable boot support on problematic arches
2008-03-31 13:04:42 +00:00
5498cc1e5b
* Temporarily disable boot support for arm CDs - the netwinder images are not
...
being produced at the moment.
2008-03-05 00:14:25 +00:00
bd1da0c827
* boot-{mipsel,sparc}: Parse website directory index case insensitive so
...
that both "<a href=" and "<A HREF=" are recognized.
2007-12-12 00:45:02 +00:00
921d112d91
Try again to make lenny/sid i386 builds work again
2007-09-18 09:48:49 +00:00
c81d64da56
* Make daily i386/amd64 lenny builds work again - don't attempt to copy
...
the win32-loader files into place if they don't exist.
2007-09-17 10:52:03 +00:00
f2026f7c5f
* Fix autorun.inf generation when win32-loader is present.
2007-09-13 18:28:21 +00:00
8a0984b325
* Applied patch from Robert Millan <rmh@aybabtu.com> to use win32-loader
...
for autorun when CD is being used on Windows. Closes : #441846 .
2007-09-12 16:31:27 +00:00
23f2e94046
fix bashism
2007-09-10 18:10:16 +00:00
fbdb7b30fd
* Applied patch from Robert Millan <rmh@aybabtu.com> to integrate
...
win32-loader. Closes : #440220 .
2007-09-10 17:47:16 +00:00
08f297d554
* Disable debugging output in boot scripts.
2007-09-02 17:18:06 +00:00
2996bf0a1e
Invert the -e test
2007-08-11 23:23:25 +00:00
e53fc89e17
* Temporary fixup for daily lenny sparc builds - use older image locations
...
if new ones not available.
2007-08-11 12:57:12 +00:00
5655b191d5
Further logic fixing in boot-x86: amd64 should now work
2007-08-10 23:44:14 +00:00
c40e37b066
Fix boot-x86 shell syntax so it runs
2007-08-09 21:28:10 +00:00
6560eb096d
* Merge boot-i386 and boot-amd64 into boot-x86.
2007-08-02 03:47:50 +00:00
0b03aad504
* Parse isolinux.cfg case-insensatively.
2007-08-02 02:43:19 +00:00
cd50dfba26
* Drop old with26 cruft for lenny.
2007-08-02 02:28:02 +00:00
79c1614a0a
Use correct version of boot configuration files
2007-07-26 08:18:52 +00:00
7a414b8567
Partial reversion, we can always simplify further later
2007-07-26 01:53:36 +00:00
cb5987f544
- Remove support for sparc32
...
- Structure of D-I images was simplified, so adapt to that
- Fix some broken references to etch in lenny boot-sparc script
- Hope after all this things will still work...
2007-07-26 01:22:33 +00:00
ff146a5d79
Disable sparc32 for Lenny images as it is no longer supported
2007-07-18 07:39:59 +00:00
fdb006760d
Dann Frazier has taken over from Jeff Bailey for daily IA64 D-I builds
2007-05-03 22:00:21 +00:00
fff66f0336
- Also export COMPLETE for use in the README file template
...
- Clean up: remove files for potato and woody release
2007-04-10 23:31:01 +00:00
09e495846f
* Copied etch files to lenny ready for the new testing work.
2007-04-10 23:21:31 +00:00
64bd969a0c
* Fix up boot-alpha to calculate the size of the ramdisk needed, rather
...
than hard-coding to 16384. Also slight refactoring.
2007-03-20 01:01:16 +00:00
1fc78c6086
* Fix the extra_image() function in both boot-i386 and boot-amd64 to make
...
sure we don't end up overwriting extra images from one arch with those
from the other. Now the multi-arch netinst should work for the installgui
target for both arches
2007-03-13 02:21:13 +00:00
9006e6dd31
* Add the DEFAULT64 handling to boot-amd64 as well as boot-i386; needed
...
in both so that things are setup the same regardless of the order in
which the boot-$arch scripts are called
2007-03-13 01:06:07 +00:00
ec87877896
Fix path for creating splash image in boot-amd64. Closes : #413850 .
2007-03-12 01:33:39 +00:00
7b1b3973f8
* Updated isolinux.bin to the version from syslinux 3.31-3.
...
* Re-enable use of 64 bit detection, fixed now.
2007-03-01 19:18:45 +00:00
2ca98a7f32
* Cope with rolling back more than one package in case we go well
...
over the disc size
* Use a multiplier of 1.2 for HFS space - overkill, but it fixes
the multi-arch DVD overflowing. Also log if we're doing HFS.
* Tweak where we look for s390 boot files to make the weeklies work again.
2007-02-27 20:05:32 +00:00
f47d23be43
* Temporarily disable use of 64 bit detection due to syslinx's bug #410729 .
2007-02-13 01:14:35 +00:00
3d5259c5ef
* Use the 64 bit autodetection feature of syslinux 3.31-2, if available,
...
to default to the 64 bit target in multiarch isos.
2007-02-04 23:41:44 +00:00
528c0072f2
remove Suggests on delo - we grab and use the correct version direct
...
from the archive instead these days
2006-12-23 03:02:37 +00:00
342bcac67b
don't suggest binutils-multiarch, we haven't needed that for mipsel CDs since woody
2006-12-23 01:17:47 +00:00
82aa893404
Minor update to boot-sparc
2006-12-22 14:24:28 +00:00
5f185be61f
Removed old "set -x"
2006-12-21 16:19:34 +00:00
4a2a622525
Make the boot scripts more consistent in how they call add_mkisofs_opt
2006-12-21 16:05:32 +00:00
67d9909bbe
Make sure the mkisofs options file goes in the right place
2006-12-21 15:27:50 +00:00
95ffabb409
* Don't put ppc boot files on discs >1.
...
* Add more hfs options to m68k discs, to match ppc.
2006-12-12 02:09:34 +00:00
634682f779
Fixing oversights from the big merge
2006-12-07 23:51:14 +00:00
a269a8fd4c
Merge of changes from Steve's development branch to take us to
...
debian-cd version 3.0.0. Highlights:
* Support now added for multi-arch CDs/DVDs, including mixed
binary/source discs. Multi-arch discs should be bootable on those
multiple arches, modulo boot-sector clashes. Extra support added
in boot-i386 and boot-amd64 to make the 2 main arches happily
co-exist.
* Disc sizing is now much more intelligent - sizes are defined
depending on the disk type chosen at the start, and discs are now
filled exactly to those sizes while files are added rather than
the old up-front guessing method. Equally, the metadata on the
disc (Packages, Packages.gz, Sources, Sources.gz, md5sums.txt) is
generated as much as possible while this is happening to make the
sizing code incredibly accurate. Using this method of disc sizing
means that customising discs should be much easier/safer - either
add custom contents at the start and debian-cd will fill the
remainder of the disc, or afterwards roll back the packages on the
disc and add extras later.
* Source is now treated as (almost) just another arch, with most of
the special casing for source hidden internally. If asking for
source-only discs, they will simply be built using all the
available sources. If combined with other arches, the sources will
automatically be chosen to match the binary packages. Meeting GPL
requirements was never so easy!
* Removed lots of old cruft to clean up the codebase:
+ non-US support
+ woody support
+ lots of old support scripts that have been made redundant
+ significantly simpler Makefile, much easier to follow
+ old boot-$ARCH.calc files for estimating boot-file sizes are now
(obviously) obsolete and therefore gone
2006-12-07 23:09:01 +00:00
5f62118c2c
Daily builds for amd64 now done by Andreas Barth; with thanks to Kurt Roeckx
2006-12-07 01:01:01 +00:00
7a843520eb
* Include prep support on powerpc images again.
2006-12-04 10:30:40 +00:00
3f2f6c11e3
Don't attempt to make ppc CDs bootable after #1
2006-11-27 09:43:10 +00:00
9b44f8f3e0
Fix f1.txt mods - only apply on CD1
2006-11-27 09:36:49 +00:00
38aa21763a
* DEVEL BRANCH MERGE: Change mkisofs_opts usage: add a shell function
...
for the boot-$arch scripts to use rather than simply appending to the
$N.mkisofs_opts file directly. Needed for forthcoming multi-arch
support.
2006-11-27 02:15:29 +00:00
89235c1124
Try again for dates
2006-11-26 22:53:28 +00:00
6f101339c8
Add the build date/time into a few more places so people can see them
...
more easily; add the build time into the .disk/info file.
2006-11-26 22:42:02 +00:00
9924a80b78
* Include floppy disk images again for i386.
2006-11-23 00:42:39 +00:00
3e59b569ea
Current values
2006-11-17 00:35:50 +00:00
2a9dbeb4d8
* Include "tape" images again for S/390.
2006-11-02 07:21:58 +00:00
b5de101510
Current boot- sizes
2006-10-31 00:06:55 +00:00
ddf215a939
Also remove no longer needed boot parameters for hppa
2006-10-22 22:42:44 +00:00
de0e745535
* Increase alpha hardcoded ramdisk_size to 20 mb, 16 is too small now.
2006-10-22 22:23:56 +00:00
4a6935c1d3
* Merge patch from Petter to allow override of the default boot choice
...
in syslinux using the ISOLINUX_DEFAULT config option. Closes : #393229
2006-10-18 20:47:32 +00:00
99ca059cfa
[ Petter Reinholdtsen ]
...
* Update tools/boot/*/boot-amd64 to use the correct isolinux
splash image settings, and to insert $KERNEL_PARAMS correctly into
isolinux.cfg. Based on patches already implemented in boot-i386.
2006-10-15 16:44:41 +00:00
5a80e07493
* Fix KERNEL_PARAM breakage. Thanks to Vagrant Cascadian for the patch,
...
closes : #387255
2006-10-08 11:25:42 +00:00
277eecc730
* Remove init=/linuxrc from hppa.
2006-09-15 09:07:20 +00:00
758e9dc0bb
* Correct splash screen generation for sarge and etch, making sure the
...
correct background colour (black) is selected.
2006-09-02 10:56:44 +00:00
83af20b93f
cope with powerpc cdrom -> cdrom64 change
2006-08-29 14:09:19 +00:00
4110d78b3e
move an echo around
2006-08-24 18:52:10 +00:00
73f2664cec
Disable el-torito boot image for i386
2006-07-30 13:00:57 +00:00
2e0f6ffcca
Exclude floppy and el-torito images for i386 as they are not being built
2006-07-29 21:09:05 +00:00
7c7e23faf9
Make sure that we also actually take 2.6 kernel images if DI_DIR is set
2006-07-29 20:03:50 +00:00
452b0ec0a6
There are no tape images with 2.6.16 for S/390
2006-07-29 19:11:12 +00:00
ed1abc0ee4
* Mips has dropped r5k-ip22 kernels and gained r5k-ip32. And r5k-ip32
...
doesn't have CD boot support yet, so don't attempt to use the cdrom
boot image.
2006-07-28 22:35:14 +00:00
7bde597d14
Mips has dropped r5k-ip22 kernels and gained r5k-ip32
2006-07-28 21:18:49 +00:00
fa8a2837be
Drop 2.4 support for sparc64; switch from 2.4 to 2.6 for sparc32
2006-07-27 10:25:48 +00:00
45ac515723
Give daily builds for i386 back to Joey
2006-07-23 17:38:16 +00:00
d9d9e45386
Temporarily take over i386 daily builds
2006-07-17 09:29:14 +00:00
c48ee7153e
Add debug output to help work out which images we're using
...
Fix boot-amd64 to find the daily image files correctly
2006-07-03 14:39:16 +00:00
22fbd311c0
Syncing changes back from the build machine
2006-07-03 14:00:34 +00:00
fd5997614f
Sync some changes in from the build machine
2006-07-03 13:59:09 +00:00
f4277b2348
AMD64 d-i images are now available from people.d.o
2006-07-02 22:14:37 +00:00
ba45622865
Fix URL to powerpc images
2006-06-24 12:31:04 +00:00
20434539ca
Wouter Verhelst has taken over daily d-i builds for powerpc
2006-06-23 20:50:42 +00:00
a36572ee9e
* Add gtk initrd to amd64 images if available.
...
* Add autorun file to amd64 images if there's a README.html, same as for
i386.
2006-06-15 19:39:41 +00:00
99a1707eb8
* Correct url to the amd64 dailys.
2006-06-15 19:25:33 +00:00
5c2d0ecb20
* d-i doesn't include bast images anymore, drop from boot-arm.
2006-05-24 18:03:47 +00:00
43ff633c0e
* i386 has stopped building because the el-torito boot images were turned
...
off (due to size issues). Fix this by not failing if the el-torito images
arn't there.
2006-05-24 18:00:58 +00:00
9ce8394fb7
fix copying of image to cd
2006-05-15 22:04:18 +00:00
0bcfa7bdad
remove remaining with* files always
2006-05-15 22:00:57 +00:00
88c8591c95
typo
2006-05-15 00:53:46 +00:00
cbd40e680e
* Add support to boot/etch/boot-i386 for adding gtk images. If the
...
isolinux files include .with26+gtk, include gtk initrd along with the
2.4 kernel. If .withgtk, include gtk initrd along with the default
(presumably 2.6) kernel.
untested!!
2006-05-14 17:27:44 +00:00
9d6a6006e7
* ths has taken over mipsel builds
2006-05-10 20:08:42 +00:00
78966b6bde
* Fix to tools/grab_md5: reset the file and dir name after each source
...
package is finished with.
* Add extra debug in tools/boot/etch/boot-i386
2006-05-02 21:52:05 +00:00
c017d3cf55
* Only tell mkisofs to use the prep initrd if it's available (which it
...
currently isn't for 2.6.16).
2006-04-27 14:05:22 +00:00
e13e471f6d
Thiemo Seufer has resumed building images for mips
2006-04-23 18:10:53 +00:00
d015fe8754
Revert i386 takeover - Joey is back
2006-04-22 23:59:26 +00:00
c52a1e5ec6
Temporarily take over daily builds for i386 from Joey
2006-04-22 02:17:42 +00:00
0596978928
Colin Watson has taken over daily d-i builds for PowerPC
2006-03-28 16:23:04 +00:00
7980cf50a4
* Remove net-drivers floppy from full CD images.
2006-03-08 18:02:33 +00:00
d056a7b6e5
Mipsel boot images haven't actually moved yet in etch. Cope with this
...
- fall back to the old location if the new one isn't there.
2006-02-28 01:23:18 +00:00
e365484e8b
Kyle McMartin is now taking care of HPPA daily builds
2006-02-15 22:20:09 +00:00
b9ee14bddd
Update the boot-sparc scripts to improve the algorithm for finding the
...
right version of silo to use - grab the filename from the appropriate
Packages file rather than looking in the silo directory in the pool.
2006-02-12 20:53:25 +00:00
3f38cc069c
tbm has temporarily taken over daily mips builds from ths
2006-02-07 18:40:38 +00:00
839d556954
arm: risc* flavours are no longer built; patch by Martin Michlmayr
2006-02-07 18:34:58 +00:00
576e35c431
Add an initial copy of boot-amd64.calc for etch
2006-02-05 02:09:42 +00:00
f7a94acfc8
Cope with mipsel boot images moving location. Closes : #349563
2006-01-24 00:08:23 +00:00
a408da1a54
* Drop floppies from i386 netinst and businesscard; this will make the
...
netinst small enough to fit on 128 mb usb keychains again.
2005-12-28 18:07:01 +00:00
b9dab72c03
Use "|" rather than "/" as a sed separator in the etch boot-amd64 and
...
boot-i386 scripts. Closes : #342344
2005-12-17 17:53:52 +00:00
5e5a31750c
Set boot-s390 script executable
2005-12-15 22:24:34 +00:00
70605c7b44
Fix the code to find the kernel(s) for HPPA; JTE wants the path
...
relative to the root of the CD, not the absolute path on the host
filesystem.
2005-12-08 01:33:17 +00:00
2c24d679d4
Merging JTE support into the trunk now that the Debian mkisofs package
...
has JTE included by default.
2005-12-07 00:08:57 +00:00
ab9a1f6db4
Problem analyzed, so debugging no longer needed
2005-10-31 16:22:02 +00:00
b7c085427d
Debug why daily m68k builds are not build from smarenka's home; will revert tomorrow
2005-10-31 15:50:25 +00:00
a365d7c22b
* Don't chmod amiboot if it doesn't exist.
2005-10-31 15:20:27 +00:00
f315aecc40
use $DI_CODENAME in boot-powerpc rather than hardcoding sarge/etch
2005-10-18 08:27:19 +00:00
d44ee5d938
Apply patch from Bdale to make CD building work correctly on HPPA.
2005-09-29 08:01:49 +00:00
9fdb678d8b
Copied Richard Hirst's hppa ramdisk size fix for sarge as well as etch
2005-09-26 21:25:25 +00:00
c2df2f7c1e
- Fix ramdisk_size value for hppa
2005-09-21 07:32:45 +00:00
3adf94038b
Readded the bitness thingy, which got lost before i had svn access.
2005-09-20 17:26:10 +00:00
5aaa17f9fc
Better fix, which doesn't go over the net.
2005-09-20 15:10:06 +00:00
25b483599a
Now test not only if $DI_DIR is not empty, but also if it is a real dir.
...
This was not the case in the powerpc builds, and thus the build failed.
2005-09-20 14:55:36 +00:00
75b9f25cc5
Added set -x to actually provide some visible info in the log about what is happening. Hopefully it will work this time.
2005-09-20 12:15:50 +00:00
86b020552d
Little fix committed for Sven Luther.
2005-09-19 14:12:28 +00:00
46f282657d
second half of sven's patch
2005-09-17 17:05:27 +00:00
fc0ae496b1
* Applied patch from Sven Luther which adds powerpc64 kernels to
...
the CDs, and adds IBM chrp boot files. Closes : #328274
* Remove Debian_sid task, which dates from before woody and should not be
used.
2005-09-14 17:55:39 +00:00
34df7ddf4e
fix sid symlinks, and begin versioning in svn
2005-09-07 15:21:11 +00:00
10f1ae01cc
Update for Sparc:
...
- sparc64: switch to 2.6.12 kernel; make CD multiboot 2.6 and 2.4,
using 2.6.12 by default
- sparc32: drop 2.6 kernel support as it has no 2.6.12 kernel
- restructure silo.conf with proper support for install, expert and
rescue boot options
2005-09-05 21:05:05 +00:00
2e38d856fa
- Applied s390 boot support patch by Frans Pop. Closes : #318021
2005-08-08 17:51:56 +00:00
97a1836833
- Switch mipsel to use my builds.
2005-08-04 05:54:00 +00:00
2d7658bac7
- Use isolinux config files included in the d-i debian-cd_info tarball
...
so it does not need to be maintained in both places.
2005-07-08 09:22:27 +00:00
433894c716
please limit pointless debugging messages to English. :-P
2005-07-08 09:12:12 +00:00
73a4345271
- Completed access cd-drivers transition.
...
- d-i renamed syslinux.txt to boot.txt, us new name instead of
renaming file from d-i.
2005-07-08 08:07:22 +00:00
f5a7063347
m68k etch updates
2005-06-29 12:41:28 +00:00
f82f3649ac
handle etch changes in d-i
2005-06-15 12:29:25 +00:00
d51a2cabd4
- Synced up all sarge changes to etch.
2005-06-10 21:45:45 +00:00
74ed0539fd
Multiple changes before final release:
...
* Add release notes to CD#1 on full CD/DVD sets, and link them from
README.html
* Tweak the generated Release files to be "stable" rather than
"testing"
* Added Sven's patch: a pegasos forth boot script
2005-06-04 14:36:59 +00:00
d90f6e41f4
Allow the usage of a local mirror of the daily d-i builds to be used
...
for sid_d-i builds.
2005-05-26 17:56:34 +00:00
d3ab791cdb
Port to etch previous changes I commited for sarge.
2005-05-17 16:08:15 +00:00
34220d8a54
Add some amd64 patches from Goswin that fix boot-amd64 and missing packages.
2005-05-17 11:49:25 +00:00
8a8cc186cb
Add autorun capabilities to i386 cds
2005-05-17 09:55:36 +00:00
f029f6e6e6
Allow the usage of a local mirror of the daily d-i builds to be used
...
for sid_d-i builds.
2005-05-17 09:47:34 +00:00
c754493b57
Don't copy boot.img.gz onto amd64 CD1
2005-05-11 22:10:10 +00:00
15be267e26
- Add support for f4.txt that is for systems with the 2.6 kernel.
2005-05-06 18:47:45 +00:00
14988d1047
Add etch stuff. Mostly copied unchanged from sarge, with light edits.
...
Only enable the rescue isolinux targets for etch.
I hope at least some of the etch stuff (like tools/boot/etch) can be used
for the daily CD builds that build using d-i daily builds.
2005-05-05 16:15:44 +00:00
b49bfbf516
- Add rescue stanzas to isolinux.cfg. Rescue mode is supported in
...
post-sarge d-i images only, but I guess it won't hurt to have the
stanzas there even for sarge images. We may add rescue mode in r1
or something even..
2005-05-04 18:20:17 +00:00
0359eee355
Don't copy the whole d-i cdrom directory onto CD1 for amd64.
...
Closes : #306926
2005-05-01 17:20:06 +00:00
f052e56e2a
Make woody's post-boot-mipsel script cope with extra fields in the
...
output of sarge's isoinfo
2005-04-18 00:00:06 +00:00
2d8b715b82
sparc daily build moved
2005-03-20 20:09:34 +00:00
496b90e673
preferred url for alpha images
2005-02-18 18:15:09 +00:00
f427edbd31
kmuto is now doing arm builds
2005-02-17 07:46:30 +00:00
509a9fe0e0
- Switch mips daily builds to new builds by ths.
2005-01-20 22:34:50 +00:00
553eb21ce6
switch hppa to 2.6.8 kernel version of installer
2005-01-16 04:35:22 +00:00
b01a2e73ba
- Apply patch from bug #258026 .
2005-01-12 16:38:17 +00:00
3a19971c45
Added script to make amd64 CDs/DVDs bootable.
...
FIXME: the help text for isolinux still needs updating...
2004-12-08 22:47:20 +00:00
a990f95026
use vorlon's daily builds for alpha, jailey's machine is going away
2004-12-03 18:19:49 +00:00
f1d2a2a4fb
- Update debian-installer's tasks.
...
- Update calc script and calc files.
- Make i386 cds 8.3 filenaming compatible again.
- Workaround the two kernels problem on hppa.
2004-11-29 18:36:42 +00:00
75b221301d
Handle missing m68k/bvme6000 floppy
2004-10-20 12:03:11 +00:00
1619ec160a
Add tools/calc script to update .calc files with up to date estimations on
...
the iso size parameters.
Update .calc files with up to date estimations.
Update debian-installer tasks.
2004-10-06 20:38:25 +00:00
4db567acec
Upload some changes by Thiemo Seufer, namely:
...
- Add arcboot to the mips tasks/base-sarge list, like it is done for
other bootloaders.
- Add a default bootfile named sashARCS for mips, aliased to r4k-ip22.
2004-10-01 15:11:14 +00:00
7a550c08b1
fix typo
2004-10-01 00:05:06 +00:00
d8ba0ec5ec
Add prep powerpc support.
...
Try to fix powerpc DVDs.
Update debian-installer tasks.
2004-09-27 22:30:36 +00:00
049b9e7d94
- Drop i386 floppies that have gone away in d-i.
2004-09-25 14:20:26 +00:00
8c4888772d
Hardlink powerpc and powerpc/minimal vmlinux files together, since they're
...
identical.
2004-09-25 10:45:15 +00:00
dee0dd273f
Remove 2.4 images from power3 and power4; those few who want them can
...
netboot.
Remove 2.6 PReP images from power3 and power4, as no such machines exist.
2004-09-25 10:32:32 +00:00
d98b470673
Fix syntax error.
2004-09-24 18:00:19 +00:00
5d4fbb96b8
Drop compatibility with old powerpc 2.4/2.6 d-i image layout, since the
...
changed image layout reached sarge a while ago.
2004-09-24 17:59:29 +00:00
d57cff08f9
put back the extra images for full cds
2004-09-23 12:06:29 +00:00
957b7e9db9
- Remove access floppies to save space on netinsts. Also remove
...
net-drivers floppy and some other things not really needed for install
from CD.
2004-09-23 11:12:52 +00:00
3fa03ffcd3
Simplified boot-powerpc copying stuff a bit.
...
Added support for cdrom-minimal images copying.
2004-09-20 19:51:24 +00:00
f5f49b5527
check and install disk image
2004-09-18 15:31:10 +00:00
Steve McIntyre
cd-builder user
Frans Pop
Raphaël Hertzog
Luk Claes
Colin Watson
Joey Hess
Santiago Garcia Mantinan
Otavio Salvador
Petter Reinholdtsen
Tollef Fog Heen
Sven Luther
Stephen R. Marenka
Bdale Garbee
Kenshi Muto