2024-10-27 15:16:46 -01:00
#!/bin/bash
#-
# Copyright (c) 2012-2015 Juan Romero Pardines <xtraeme@gmail.com>.
# 2012 Dave Elusive <davehome@redthumb.info.tm>.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-
# Make sure we don't inherit these from env.
SOURCE_DONE =
HOSTNAME_DONE =
KEYBOARD_DONE =
LOCALE_DONE =
TIMEZONE_DONE =
ROOTPASSWORD_DONE =
USERLOGIN_DONE =
USERPASSWORD_DONE =
USERNAME_DONE =
USERGROUPS_DONE =
USERACCOUNT_DONE =
BOOTLOADER_DONE =
PARTITIONS_DONE =
NETWORK_DONE =
FILESYSTEMS_DONE =
MIRROR_DONE =
TARGETDIR = /mnt/target
LOG = /dev/tty8
2024-10-28 11:24:03 -01:00
CONF_FILE = /tmp/.pep-installer.conf
2024-10-27 15:16:46 -01:00
if [ ! -f $CONF_FILE ] ; then
touch -f $CONF_FILE
fi
ANSWER = $( mktemp -t vinstall-XXXXXXXX || exit 1)
TARGET_FSTAB = $( mktemp -t vinstall-fstab-XXXXXXXX || exit 1)
trap "DIE" INT TERM QUIT
# disable printk
if [ -w /proc/sys/kernel/printk ] ; then
echo 0 >/proc/sys/kernel/printk
fi
# Detect if this is an EFI system.
if [ -e /sys/firmware/efi/systab ] ; then
EFI_SYSTEM = 1
EFI_FW_BITS = $( cat /sys/firmware/efi/fw_platform_size)
if [ $EFI_FW_BITS -eq 32 ] ; then
EFI_TARGET = i386-efi
else
EFI_TARGET = x86_64-efi
fi
fi
# dialog colors
BLACK = "\Z0"
RED = "\Z1"
GREEN = "\Z2"
YELLOW = "\Z3"
BLUE = "\Z4"
MAGENTA = "\Z5"
CYAN = "\Z6"
WHITE = "\Z7"
BOLD = "\Zb"
REVERSE = "\Zr"
UNDERLINE = "\Zu"
RESET = "\Zn"
# Properties shared per widget.
MENULABEL = " ${ BOLD } Use UP and DOWN keys to navigate \
menus. Use TAB to switch between buttons and ENTER to select .${ RESET } "
MENUSIZE = "14 60 0"
INPUTSIZE = "8 60"
MSGBOXSIZE = "8 70"
YESNOSIZE = " $INPUTSIZE "
WIDGET_SIZE = "10 70"
DIALOG( ) {
rm -f $ANSWER
dialog --colors --keep-tite --no-shadow --no-mouse \
2024-10-28 11:24:03 -01:00
--backtitle " ${ BOLD } ${ WHITE } Peppermintos installation -- https://peppermintos.com (@@MKLIVE_VERSION@@) ${ RESET } " \
2024-10-27 15:16:46 -01:00
--cancel-label "Back" --aspect 20 " $@ " 2>$ANSWER
return $?
}
INFOBOX( ) {
# Note: dialog --infobox and --keep-tite don't work together
dialog --colors --no-shadow --no-mouse \
2024-10-28 11:24:03 -01:00
--backtitle " ${ BOLD } ${ WHITE } Peppermintos installation -- https://peppermintos.com (@@MKLIVE_VERSION@@) ${ RESET } " \
2024-10-27 15:16:46 -01:00
--title " ${ TITLE } " --aspect 20 --infobox " $@ "
}
DIE( ) {
rval = $1
[ -z " $rval " ] && rval = 0
clear
rm -f $ANSWER $TARGET_FSTAB
# reenable printk
if [ -w /proc/sys/kernel/printk ] ; then
echo 4 >/proc/sys/kernel/printk
fi
umount_filesystems
exit $rval
}
set_option( ) {
if grep -Eq " ^ ${ 1 } .* " $CONF_FILE ; then
sed -i -e " /^ ${ 1 } .*/d " $CONF_FILE
fi
echo " ${ 1 } ${ 2 } " >>$CONF_FILE
}
get_option( ) {
echo $( grep -E " ^ ${ 1 } .* " $CONF_FILE | sed -e " s| ${ 1 } || " )
}
# ISO-639 language names for locales
iso639_language( ) {
case " $1 " in
aa) echo "Afar" ; ;
af) echo "Afrikaans" ; ;
an) echo "Aragonese" ; ;
ar) echo "Arabic" ; ;
ast) echo "Asturian" ; ;
be) echo "Belgian" ; ;
bg ) echo "Bulgarian" ; ;
bhb) echo "Bhili" ; ;
br) echo "Breton" ; ;
bs) echo "Bosnian" ; ;
ca) echo "Catalan" ; ;
cs) echo "Czech" ; ;
cy) echo "Welsh" ; ;
da) echo "Danish" ; ;
de) echo "German" ; ;
el) echo "Greek" ; ;
en) echo "English" ; ;
es) echo "Spanish" ; ;
et) echo "Estonian" ; ;
eu) echo "Basque" ; ;
fi ) echo "Finnish" ; ;
fo) echo "Faroese" ; ;
fr) echo "French" ; ;
ga) echo "Irish" ; ;
gd) echo "Scottish Gaelic" ; ;
gl) echo "Galician" ; ;
gv) echo "Manx" ; ;
he) echo "Hebrew" ; ;
hr) echo "Croatian" ; ;
hsb) echo "Upper Sorbian" ; ;
hu) echo "Hungarian" ; ;
id) echo "Indonesian" ; ;
is) echo "Icelandic" ; ;
it) echo "Italian" ; ;
iw) echo "Hebrew" ; ;
ja) echo "Japanese" ; ;
ka) echo "Georgian" ; ;
kk) echo "Kazakh" ; ;
kl) echo "Kalaallisut" ; ;
ko) echo "Korean" ; ;
ku) echo "Kurdish" ; ;
kw) echo "Cornish" ; ;
lg) echo "Ganda" ; ;
lt) echo "Lithuanian" ; ;
lv) echo "Latvian" ; ;
mg) echo "Malagasy" ; ;
mi) echo "Maori" ; ;
mk) echo "Macedonian" ; ;
ms) echo "Malay" ; ;
mt) echo "Maltese" ; ;
nb) echo "Norwegian Bokmål" ; ;
nl) echo "Dutch" ; ;
nn) echo "Norwegian Nynorsk" ; ;
oc) echo "Occitan" ; ;
om) echo "Oromo" ; ;
pl) echo "Polish" ; ;
pt) echo "Portugese" ; ;
ro) echo "Romanian" ; ;
ru) echo "Russian" ; ;
sk) echo "Slovak" ; ;
sl) echo "Slovenian" ; ;
so) echo "Somali" ; ;
sq) echo "Albanian" ; ;
st) echo "Southern Sotho" ; ;
sv) echo "Swedish" ; ;
tcy) echo "Tulu" ; ;
tg) echo "Tajik" ; ;
th) echo "Thai" ; ;
tl) echo "Tagalog" ; ;
tr) echo "Turkish" ; ;
uk) echo "Ukrainian" ; ;
uz) echo "Uzbek" ; ;
wa) echo "Walloon" ; ;
xh) echo "Xhosa" ; ;
yi) echo "Yiddish" ; ;
zh) echo "Chinese" ; ;
zu) echo "Zulu" ; ;
*) echo " $1 " ; ;
esac
}
# ISO-3166 country codes for locales
iso3166_country( ) {
case " $1 " in
AD) echo "Andorra" ; ;
AE) echo "United Arab Emirates" ; ;
AL) echo "Albania" ; ;
AR) echo "Argentina" ; ;
AT) echo "Austria" ; ;
AU) echo "Australia" ; ;
BA) echo "Bonsia and Herzegovina" ; ;
BE) echo "Belgium" ; ;
BG) echo "Bulgaria" ; ;
BH) echo "Bahrain" ; ;
BO) echo "Bolivia" ; ;
BR) echo "Brazil" ; ;
BW) echo "Botswana" ; ;
BY) echo "Belarus" ; ;
CA) echo "Canada" ; ;
CH) echo "Switzerland" ; ;
CL) echo "Chile" ; ;
CN) echo "China" ; ;
CO) echo "Colombia" ; ;
CR) echo "Costa Rica" ; ;
CY) echo "Cyprus" ; ;
CZ) echo "Czech Republic" ; ;
DE) echo "Germany" ; ;
DJ) echo "Djibouti" ; ;
DK) echo "Denmark" ; ;
DO) echo "Dominican Republic" ; ;
DZ) echo "Algeria" ; ;
EC) echo "Ecuador" ; ;
EE) echo "Estonia" ; ;
EG) echo "Egypt" ; ;
ES) echo "Spain" ; ;
FI) echo "Finland" ; ;
FO) echo "Faroe Islands" ; ;
FR) echo "France" ; ;
GB) echo "Great Britain" ; ;
GE) echo "Georgia" ; ;
GL) echo "Greenland" ; ;
GR) echo "Greece" ; ;
GT) echo "Guatemala" ; ;
HK) echo "Hong Kong" ; ;
HN) echo "Honduras" ; ;
HR) echo "Croatia" ; ;
HU) echo "Hungary" ; ;
ID) echo "Indonesia" ; ;
IE) echo "Ireland" ; ;
IL) echo "Israel" ; ;
IN) echo "India" ; ;
IQ) echo "Iraq" ; ;
IS) echo "Iceland" ; ;
IT) echo "Italy" ; ;
JO) echo "Jordan" ; ;
JP) echo "Japan" ; ;
KE) echo "Kenya" ; ;
KR) echo "Korea, Republic of" ; ;
KW) echo "Kuwait" ; ;
KZ) echo "Kazakhstan" ; ;
LB) echo "Lebanon" ; ;
LT) echo "Lithuania" ; ;
LU) echo "Luxembourg" ; ;
LV) echo "Latvia" ; ;
LY) echo "Libya" ; ;
MA) echo "Morocco" ; ;
MG) echo "Madagascar" ; ;
MK) echo "Macedonia" ; ;
MT) echo "Malta" ; ;
MX) echo "Mexico" ; ;
MY) echo "Malaysia" ; ;
NI) echo "Nicaragua" ; ;
NL) echo "Netherlands" ; ;
NO) echo "Norway" ; ;
NZ) echo "New Zealand" ; ;
OM) echo "Oman" ; ;
PA) echo "Panama" ; ;
PE) echo "Peru" ; ;
PH) echo "Philippines" ; ;
PL) echo "Poland" ; ;
PR) echo "Puerto Rico" ; ;
PT) echo "Portugal" ; ;
PY) echo "Paraguay" ; ;
QA) echo "Qatar" ; ;
RO) echo "Romania" ; ;
RU) echo "Russian Federation" ; ;
SA) echo "Saudi Arabia" ; ;
SD) echo "Sudan" ; ;
SE) echo "Sweden" ; ;
SG) echo "Singapore" ; ;
SI) echo "Slovenia" ; ;
SK) echo "Slovakia" ; ;
SO) echo "Somalia" ; ;
SV) echo "El Salvador" ; ;
SY) echo "Syria" ; ;
TH) echo "Thailand" ; ;
TJ) echo "Tajikistan" ; ;
TN) echo "Tunisia" ; ;
TR) echo "Turkey" ; ;
TW) echo "Taiwan" ; ;
UA) echo "Ukraine" ; ;
UG) echo "Uganda" ; ;
US) echo "United States of America" ; ;
UY) echo "Uruguay" ; ;
UZ) echo "Uzbekistan" ; ;
VE) echo "Venezuela" ; ;
YE) echo "Yemen" ; ;
ZA) echo "South Africa" ; ;
ZW) echo "Zimbabwe" ; ;
*) echo " $1 " ; ;
esac
}
show_disks( ) {
local dev size sectorsize gbytes
# IDE
for dev in $( ls /sys/block| grep -E '^hd' ) ; do
if [ " $( cat /sys/block/$dev /device/media) " = "disk" ] ; then
# Find out nr sectors and bytes per sector;
echo " /dev/ $dev "
size = $( cat /sys/block/$dev /size)
sectorsize = $( cat /sys/block/$dev /queue/hw_sector_size)
gbytes = " $(( $size * $sectorsize / 1024 / 1024 / 1024 )) "
echo " size: ${ gbytes } GB;sector_size: $sectorsize "
fi
done
# SATA/SCSI and Virtual disks (virtio)
for dev in $( ls /sys/block| grep -E '^([sv]|xv)d|mmcblk|nvme' ) ; do
echo " /dev/ $dev "
size = $( cat /sys/block/$dev /size)
sectorsize = $( cat /sys/block/$dev /queue/hw_sector_size)
gbytes = " $(( $size * $sectorsize / 1024 / 1024 / 1024 )) "
echo " size: ${ gbytes } GB;sector_size: $sectorsize "
done
# cciss(4) devices
for dev in $( ls /dev/cciss 2>/dev/null| grep -E 'c[0-9]d[0-9]$' ) ; do
echo " /dev/cciss/ $dev "
size = $( cat /sys/block/cciss\! $dev /size)
sectorsize = $( cat /sys/block/cciss\! $dev /queue/hw_sector_size)
gbytes = " $(( $size * $sectorsize / 1024 / 1024 / 1024 )) "
echo " size: ${ gbytes } GB;sector_size: $sectorsize "
done
}
get_partfs( ) {
# Get fs type from configuration if available. This ensures
# that the user is shown the proper fs type if they install the system.
local part = " $1 "
local default = " ${ 2 :- none } "
local fstype = $( grep " MOUNTPOINT ${ part } " " $CONF_FILE " | awk '{print $3}' )
echo " ${ fstype :- $default } "
}
show_partitions( ) {
local dev fstype fssize p part
set -- $( show_disks)
while [ $# -ne 0 ] ; do
disk = $( basename $1 )
shift 2
# ATA/SCSI/SATA
for p in /sys/block/$disk /$disk *; do
if [ -d $p ] ; then
part = $( basename $p )
fstype = $( lsblk -nfr /dev/$part | awk '{print $2}' | head -1)
[ " $fstype " = "iso9660" ] && continue
[ " $fstype " = "crypto_LUKS" ] && continue
[ " $fstype " = "LVM2_member" ] && continue
fssize = $( lsblk -nr /dev/$part | awk '{print $4}' | head -1)
echo " /dev/ $part "
echo " size: ${ fssize :- unknown } ;fstype: $( get_partfs " /dev/ $part " ) "
fi
done
done
# Device Mapper
for p in /dev/mapper/*; do
part = $( basename $p )
[ " ${ part } " = "live-rw" ] && continue
[ " ${ part } " = "live-base" ] && continue
[ " ${ part } " = "control" ] && continue
fstype = $( lsblk -nfr $p | awk '{print $2}' | head -1)
fssize = $( lsblk -nr $p | awk '{print $4}' | head -1)
echo " ${ p } "
echo " size: ${ fssize :- unknown } ;fstype: $( get_partfs " $p " ) "
done
# Software raid (md)
for p in $( ls -d /dev/md* 2>/dev/null| grep '[0-9]' ) ; do
part = $( basename $p )
if cat /proc/mdstat| grep -qw $part ; then
fstype = $( lsblk -nfr /dev/$part | awk '{print $2}' )
[ " $fstype " = "crypto_LUKS" ] && continue
[ " $fstype " = "LVM2_member" ] && continue
fssize = $( lsblk -nr /dev/$part | awk '{print $4}' )
echo " $p "
echo " size: ${ fssize :- unknown } ;fstype: $( get_partfs " $p " ) "
fi
done
# cciss(4) devices
for part in $( ls /dev/cciss 2>/dev/null| grep -E 'c[0-9]d[0-9]p[0-9]+' ) ; do
fstype = $( lsblk -nfr /dev/cciss/$part | awk '{print $2}' )
[ " $fstype " = "crypto_LUKS" ] && continue
[ " $fstype " = "LVM2_member" ] && continue
fssize = $( lsblk -nr /dev/cciss/$part | awk '{print $4}' )
echo " /dev/cciss/ $part "
echo " size: ${ fssize :- unknown } ;fstype: $( get_partfs " /dev/cciss/ $part " ) "
done
if [ -e /sbin/lvs ] ; then
# LVM
lvs --noheadings| while read lvname vgname perms size; do
echo " /dev/mapper/ ${ vgname } - ${ lvname } "
echo " size: ${ size } ;fstype: $( get_partfs " /dev/mapper/ ${ vgname } - ${ lvname } " lvm) "
done
fi
}
menu_filesystems( ) {
local dev fstype fssize mntpoint reformat
while true; do
DIALOG --ok-label "Change" --cancel-label "Done" \
--title " Select the partition to edit " --menu " $MENULABEL " \
${ MENUSIZE } $( show_partitions)
[ $? -ne 0 ] && return
dev = $( cat $ANSWER )
DIALOG --title " Select the filesystem type for $dev " \
--menu " $MENULABEL " ${ MENUSIZE } \
"btrfs" "Oracle's Btrfs" \
"ext2" "Linux ext2 (no journaling)" \
"ext3" "Linux ext3 (journal)" \
"ext4" "Linux ext4 (journal)" \
"f2fs" "Flash-Friendly Filesystem" \
"swap" "Linux swap" \
"vfat" "FAT32" \
"xfs" "SGI's XFS"
if [ $? -eq 0 ] ; then
fstype = $( cat $ANSWER )
else
continue
fi
if [ " $fstype " != "swap" ] ; then
DIALOG --inputbox " Please specify the mount point for $dev : " ${ INPUTSIZE }
if [ $? -eq 0 ] ; then
mntpoint = $( cat $ANSWER )
elif [ $? -eq 1 ] ; then
continue
fi
else
mntpoint = swap
fi
DIALOG --yesno " Do you want to create a new filesystem on $dev ? " ${ YESNOSIZE }
if [ $? -eq 0 ] ; then
reformat = 1
elif [ $? -eq 1 ] ; then
reformat = 0
else
continue
fi
fssize = $( lsblk -nr $dev | awk '{print $4}' )
set -- " $fstype " " $fssize " " $mntpoint " " $reformat "
if [ -n " $1 " -a -n " $2 " -a -n " $3 " -a -n " $4 " ] ; then
local bdev = $( basename $dev )
local ddev = $( basename $( dirname $dev ) )
if [ " $ddev " != "dev" ] ; then
sed -i -e " /^MOUNTPOINT \/dev\/ ${ ddev } \/ ${ bdev } .*/d " $CONF_FILE
else
sed -i -e " /^MOUNTPOINT \/dev\/ ${ bdev } .*/d " $CONF_FILE
fi
echo " MOUNTPOINT $dev $1 $2 $3 $4 " >>$CONF_FILE
fi
done
FILESYSTEMS_DONE = 1
}
menu_partitions( ) {
DIALOG --title " Select the disk to partition " \
--menu " $MENULABEL " ${ MENUSIZE } $( show_disks)
if [ $? -eq 0 ] ; then
local device = $( cat $ANSWER )
DIALOG --title " Select the software for partitioning " \
--menu " $MENULABEL " ${ MENUSIZE } \
"cfdisk" "Easy to use" \
"fdisk" "More advanced"
if [ $? -eq 0 ] ; then
local software = $( cat $ANSWER )
DIALOG --title " Modify Partition Table on $device " --msgbox " \n
${ BOLD } ${ software } will be executed in disk $device .${ RESET } \n \n
For BIOS systems, MBR or GPT partition tables are supported.\n
To use GPT on PC BIOS systems an empty partition of 1MB must be added\n
at the first 2GB of the disk with the TOGGLE \` bios_grub' enabled.\n
${ BOLD } NOTE: you don' t need this on EFI systems.${ RESET } \n \n
For EFI systems GPT is mandatory and a FAT32 partition with at least\n
100MB must be created with the TOGGLE \` boot' , this will be used as\n
EFI System Partition. This partition must have mountpoint as \` /boot/efi' .\n \n
At least 1 partition is required for the rootfs ( /) .\n
For swap, RAM*2 must be really enough. For / 600MB are required.\n \n
${ BOLD } WARNING: /usr is not supported as a separate partition.${ RESET } \n
${ RESET } \n " 18 80
if [ $? -eq 0 ] ; then
while true; do
clear; $software $device ; PARTITIONS_DONE = 1
break
done
else
return
fi
fi
fi
}
menu_keymap( ) {
local _keymaps = " $( find /usr/share/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f\n" | sed 's|.map.gz||g' | sort) "
local _KEYMAPS =
for f in ${ _keymaps } ; do
_KEYMAPS = " ${ _KEYMAPS } ${ f } - "
done
while true; do
DIALOG --title " Select your keymap " --menu " $MENULABEL " 14 70 14 ${ _KEYMAPS }
if [ $? -eq 0 ] ; then
set_option KEYMAP " $( cat $ANSWER ) "
loadkeys " $( cat $ANSWER ) "
KEYBOARD_DONE = 1
break
else
return
fi
done
}
set_keymap( ) {
local KEYMAP = $( get_option KEYMAP)
if [ -f /etc/vconsole.conf ] ; then
sed -i -e " s|KEYMAP=.*|KEYMAP= $KEYMAP |g " $TARGETDIR /etc/vconsole.conf
else
sed -i -e " s|#\?KEYMAP=.*|KEYMAP= $KEYMAP |g " $TARGETDIR /etc/rc.conf
fi
}
menu_locale( ) {
local _locales = " $( grep -E '\.UTF-8' /etc/default/libc-locales| awk '{print $1}' | sed -e 's/^#//' ) "
local LOCALES ISO639 ISO3166
local TMPFILE = $( mktemp -t vinstall-XXXXXXXX || exit 1)
INFOBOX "Scanning locales ..." 4 60
for f in ${ _locales } ; do
eval $( echo $f | awk ' BEGIN { FS = "." } \
{ FS = "_" ; split( $1 , a) ; printf "ISO639=%s ISO3166=%s\n" , a[ 1] , a[ 2] } ' )
echo " $f | $( iso639_language $ISO639 ) ( $( iso3166_country $ISO3166 ) )| " >> $TMPFILE
done
clear
# Sort by ISO-639 language names
LOCALES = $( sort -t '|' -k 2 < $TMPFILE | xargs | sed -e's/| /|/g' )
rm -f $TMPFILE
while true; do
( IFS = "|" ; DIALOG --title " Select your locale " --menu " $MENULABEL " 18 70 18 ${ LOCALES } )
if [ $? -eq 0 ] ; then
set_option LOCALE " $( cat $ANSWER ) "
LOCALE_DONE = 1
break
else
return
fi
done
}
set_locale( ) {
if [ -f $TARGETDIR /etc/default/libc-locales ] ; then
local LOCALE = " $( get_option LOCALE) "
: " ${ LOCALE : =C.UTF-8 } "
sed -i -e " s|LANG=.*|LANG= $LOCALE |g " $TARGETDIR /etc/locale.conf
# Uncomment locale from /etc/default/libc-locales and regenerate it.
sed -e " / ${ LOCALE } /s/^\#// " -i $TARGETDIR /etc/default/libc-locales
echo "Running xbps-reconfigure -f glibc-locales ..." >$LOG
chroot $TARGETDIR xbps-reconfigure -f glibc-locales >$LOG 2>& 1
fi
}
menu_timezone( ) {
local areas = ( Africa America Antarctica Arctic Asia Atlantic Australia Europe Indian Pacific)
local area locations location
while ( IFS = '|' ; DIALOG ${ area : +--default-item| " $area " } --title " Select area " --menu " $MENULABEL " 19 51 19 $( printf '%s||' " ${ areas [@] } " ) ) ; do
area = $( cat $ANSWER )
read -a locations -d '\n' < <( find /usr/share/zoneinfo/$area -type f -printf '%P\n' | sort)
if ( IFS = '|' ; DIALOG --title " Select location ( ${ area } ) " --menu " $MENULABEL " 19 51 19 $( printf '%s||' " ${ locations [@]//_/ } " ) ) ; then
location = $( tr ' ' '_' < $ANSWER )
set_option TIMEZONE " $area / $location "
TIMEZONE_DONE = 1
return 0
else
continue
fi
done
return 1
}
set_timezone( ) {
local TIMEZONE = " $( get_option TIMEZONE) "
ln -sf " /usr/share/zoneinfo/ ${ TIMEZONE } " " ${ TARGETDIR } /etc/localtime "
}
menu_hostname( ) {
while true; do
DIALOG --inputbox "Set the machine hostname:" ${ INPUTSIZE }
if [ $? -eq 0 ] ; then
set_option HOSTNAME " $( cat $ANSWER ) "
HOSTNAME_DONE = 1
break
else
return
fi
done
}
set_hostname( ) {
local hostname = " $( get_option HOSTNAME) "
2024-10-28 11:24:03 -01:00
echo " ${ hostname :- pep } " > $TARGETDIR /etc/hostname
2024-10-27 15:16:46 -01:00
}
menu_rootpassword( ) {
local _firstpass _secondpass _again _desc
while true; do
if [ -z " ${ _firstpass } " ] ; then
_desc = "Enter the root password"
else
_again = " again"
fi
DIALOG --insecure --passwordbox " ${ _desc } ${ _again } " ${ INPUTSIZE }
if [ $? -eq 0 ] ; then
if [ -z " ${ _firstpass } " ] ; then
_firstpass = " $( cat $ANSWER ) "
else
_secondpass = " $( cat $ANSWER ) "
fi
if [ -n " ${ _firstpass } " -a -n " ${ _secondpass } " ] ; then
if [ " ${ _firstpass } " != " ${ _secondpass } " ] ; then
INFOBOX "Passwords do not match! Please enter again." 6 60
unset _firstpass _secondpass _again
sleep 2 && clear && continue
fi
set_option ROOTPASSWORD " ${ _firstpass } "
ROOTPASSWORD_DONE = 1
break
fi
else
return
fi
done
}
set_rootpassword( ) {
echo " root: $( get_option ROOTPASSWORD) " | chroot $TARGETDIR chpasswd -c SHA512
}
menu_useraccount( ) {
local _firstpass _secondpass _desc _again
local _groups _status _group _checklist
local _preset _userlogin
while true; do
_preset = $( get_option USERLOGIN)
2024-10-28 11:24:03 -01:00
[ -z " $_preset " ] && _preset = "pep"
2024-10-27 15:16:46 -01:00
DIALOG --inputbox "Enter a primary login name:" ${ INPUTSIZE } " $_preset "
if [ $? -eq 0 ] ; then
_userlogin = " $( cat $ANSWER ) "
# based on useradd(8) § Caveats
if [ " ${# _userlogin } " -le 32 ] && [ [ " ${ _userlogin } " = ~ ^[ a-z_] [ a-z0-9_-] *[ $] ?$ ] ] ; then
set_option USERLOGIN " ${ _userlogin } "
USERLOGIN_DONE = 1
break
else
INFOBOX "Invalid login name! Please try again." 6 60
unset _userlogin
sleep 2 && clear && continue
fi
else
return
fi
done
while true; do
_preset = $( get_option USERNAME)
2024-10-28 11:24:03 -01:00
[ -z " $_preset " ] && _preset = "Peppermint User"
2024-10-27 15:16:46 -01:00
DIALOG --inputbox " Enter a display name for login ' $( get_option USERLOGIN) ' : " \
${ INPUTSIZE } " $_preset "
if [ $? -eq 0 ] ; then
set_option USERNAME " $( cat $ANSWER ) "
USERNAME_DONE = 1
break
else
return
fi
done
while true; do
if [ -z " ${ _firstpass } " ] ; then
_desc = " Enter the password for login ' $( get_option USERLOGIN) ' "
else
_again = " again"
fi
DIALOG --insecure --passwordbox " ${ _desc } ${ _again } " ${ INPUTSIZE }
if [ $? -eq 0 ] ; then
if [ -z " ${ _firstpass } " ] ; then
_firstpass = " $( cat $ANSWER ) "
else
_secondpass = " $( cat $ANSWER ) "
fi
if [ -n " ${ _firstpass } " -a -n " ${ _secondpass } " ] ; then
if [ " ${ _firstpass } " != " ${ _secondpass } " ] ; then
INFOBOX "Passwords do not match! Please enter again." 6 60
unset _firstpass _secondpass _again
sleep 2 && clear && continue
fi
set_option USERPASSWORD " ${ _firstpass } "
USERPASSWORD_DONE = 1
break
fi
else
return
fi
done
_groups = "wheel,audio,video,floppy,cdrom,optical,kvm,xbuilder"
while true; do
_desc = " Select group membership for login ' $( get_option USERLOGIN) ': "
for _group in $( cat /etc/group) ; do
_gid = " $( echo ${ _group } | cut -d: -f3) "
_group = " $( echo ${ _group } | cut -d: -f1) "
_status = " $( echo ${ _groups } | grep -w ${ _group } ) "
if [ -z " ${ _status } " ] ; then
_status = off
else
_status = on
fi
# ignore the groups of root, existing users, and package groups
if [ [ " ${ _gid } " -ge 1000 || " ${ _group } " = "_" * || " ${ _group } " = "root" ] ] ; then
continue
fi
if [ -z " ${ _checklist } " ] ; then
_checklist = " ${ _group } ${ _group } : ${ _gid } ${ _status } "
else
_checklist = " ${ _checklist } ${ _group } ${ _group } : ${ _gid } ${ _status } "
fi
done
DIALOG --no-tags --checklist " ${ _desc } " 20 60 18 ${ _checklist }
if [ $? -eq 0 ] ; then
set_option USERGROUPS $( cat $ANSWER | sed -e's| |,|g' )
USERGROUPS_DONE = 1
break
else
return
fi
done
}
set_useraccount( ) {
[ -z " $USERACCOUNT_DONE " ] && return
chroot $TARGETDIR useradd -m -G " $( get_option USERGROUPS) " \
-c " $( get_option USERNAME) " " $( get_option USERLOGIN) "
echo " $( get_option USERLOGIN) : $( get_option USERPASSWORD) " | \
chroot $TARGETDIR chpasswd -c SHA512
}
menu_bootloader( ) {
while true; do
DIALOG --title " Select the disk to install the bootloader" \
--menu " $MENULABEL " ${ MENUSIZE } $( show_disks) none "Manage bootloader otherwise"
if [ $? -eq 0 ] ; then
set_option BOOTLOADER " $( cat $ANSWER ) "
BOOTLOADER_DONE = 1
break
else
return
fi
done
while true; do
DIALOG --yesno "Use a graphical terminal for the boot loader?" ${ YESNOSIZE }
if [ $? -eq 0 ] ; then
set_option TEXTCONSOLE 0
break
elif [ $? -eq 1 ] ; then
set_option TEXTCONSOLE 1
break
else
return
fi
done
}
set_bootloader( ) {
local dev = $( get_option BOOTLOADER) grub_args =
if [ " $dev " = "none" ] ; then return ; fi
# Check if it's an EFI system via efivars module.
if [ -n " $EFI_SYSTEM " ] ; then
2024-10-28 11:24:03 -01:00
grub_args = " --target= $EFI_TARGET --efi-directory=/boot/efi --bootloader-id=pep_grub --recheck "
2024-10-27 15:16:46 -01:00
fi
echo " Running grub-install $grub_args $dev ... " >$LOG
chroot $TARGETDIR grub-install $grub_args $dev >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
failed to install GRUB to $dev !\n Check $LOG for errors." ${ MSGBOXSIZE }
DIE 1
fi
echo " Running grub-mkconfig on $TARGETDIR ... " >$LOG
chroot $TARGETDIR grub-mkconfig -o /boot/grub/grub.cfg >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR ${ RESET } : \
failed to run grub-mkconfig!\n Check $LOG for errors." ${ MSGBOXSIZE }
DIE 1
fi
}
test_network( ) {
# Reset the global variable to ensure that network is accessible for this test.
NETWORK_DONE =
rm -f otime && \
xbps-uhelper fetch https://repo-default.voidlinux.org/current/otime >$LOG 2>& 1
local status = $?
rm -f otime
if [ " $status " -eq 0 ] ; then
DIALOG --msgbox "Network is working properly!" ${ MSGBOXSIZE }
NETWORK_DONE = 1
return 1
fi
if [ " $1 " = "nm" ] ; then
DIALOG --msgbox "Network Manager is enabled but network is inaccessible, please set it up externally with nmcli, nmtui, or the Network Manager tray applet." ${ MSGBOXSIZE }
else
DIALOG --msgbox "Network is inaccessible, please set it up properly." ${ MSGBOXSIZE }
fi
}
configure_wifi( ) {
local dev = " $1 " ssid enc pass _wpasupconf = /etc/wpa_supplicant/wpa_supplicant.conf
DIALOG --form " Wireless configuration for ${ dev } \n(encryption type: wep or wpa) " 0 0 0 \
"SSID:" 1 1 "" 1 16 30 0 \
"Encryption:" 2 1 "" 2 16 4 3 \
"Password:" 3 1 "" 3 16 63 0 || return 1
readarray -t values <<< $( cat $ANSWER )
ssid = " ${ values [0] } " ; enc = " ${ values [1] } " ; pass = " ${ values [2] } "
if [ -z " $ssid " ] ; then
DIALOG --msgbox "Invalid SSID." ${ MSGBOXSIZE }
return 1
elif [ -z " $enc " -o " $enc " != "wep" -a " $enc " != "wpa" ] ; then
DIALOG --msgbox "Invalid encryption type (possible values: wep or wpa)." ${ MSGBOXSIZE }
return 1
elif [ -z " $pass " ] ; then
DIALOG --msgbox "Invalid AP password." ${ MSGBOXSIZE }
fi
# reset the configuration to the default, if necessary
# otherwise backup the configuration
if [ -f ${ _wpasupconf } .orig ] ; then
cp -f ${ _wpasupconf } .orig ${ _wpasupconf }
else
cp -f ${ _wpasupconf } ${ _wpasupconf } .orig
fi
if [ " $enc " = "wep" ] ; then
cat << EOF >> ${ _wpasupconf }
network = {
ssid = " $ssid "
wep_key0 = " $pass "
wep_tx_keyidx = 0
auth_alg = SHARED
}
EOF
else
wpa_passphrase " $ssid " " $pass " >> ${ _wpasupconf }
fi
sv restart wpa_supplicant
configure_net_dhcp $dev
return $?
}
configure_net( ) {
local dev = " $1 " rval
DIALOG --yesno " Do you want to use DHCP for $dev ? " ${ YESNOSIZE }
rval = $?
if [ $rval -eq 0 ] ; then
configure_net_dhcp $dev
elif [ $rval -eq 1 ] ; then
configure_net_static $dev
fi
}
iface_setup( ) {
ip addr show dev $1 | grep -q -e 'inet ' -e 'inet6 '
return $?
}
configure_net_dhcp( ) {
local dev = " $1 "
iface_setup $dev
if [ $? -eq 1 ] ; then
sv restart dhcpcd 2>& 1 | tee $LOG | \
DIALOG --progressbox " Initializing $dev via DHCP... " ${ WIDGET_SIZE }
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } failed to run dhcpcd. See $LOG for details. " ${ MSGBOXSIZE }
return 1
fi
export -f iface_setup
timeout 10s bash -c " while true; do iface_setup $dev ; sleep 0.25; done "
if [ $? -eq 1 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } DHCP request failed for $dev . Check $LOG for errors. " ${ MSGBOXSIZE }
return 1
fi
fi
test_network
if [ $? -eq 1 ] ; then
set_option NETWORK " ${ dev } dhcp "
fi
}
configure_net_static( ) {
local ip gw dns1 dns2 dev = $1
DIALOG --form " Static IP configuration for $dev : " 0 0 0 \
"IP address:" 1 1 "192.168.0.2" 1 21 20 0 \
"Gateway:" 2 1 "192.168.0.1" 2 21 20 0 \
"DNS Primary" 3 1 "8.8.8.8" 3 21 20 0 \
"DNS Secondary" 4 1 "8.8.4.4" 4 21 20 0 || return 1
set -- $( cat $ANSWER )
ip = $1 ; gw = $2 ; dns1 = $3 ; dns2 = $4
echo " running: ip link set dev $dev up " >$LOG
ip link set dev $dev up >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } Failed to bring $dev interface. " ${ MSGBOXSIZE }
return 1
fi
echo " running: ip addr add $ip dev $dev " >$LOG
ip addr add $ip dev $dev >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } Failed to set ip to the $dev interface. " ${ MSGBOXSIZE }
return 1
fi
ip route add default via $gw >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } failed to setup your gateway. " ${ MSGBOXSIZE }
return 1
fi
echo " nameserver $dns1 " >/etc/resolv.conf
echo " nameserver $dns2 " >>/etc/resolv.conf
test_network
if [ $? -eq 1 ] ; then
set_option NETWORK " ${ dev } static $ip $gw $dns1 $dns2 "
fi
}
menu_network( ) {
local dev addr f DEVICES
if [ -e /var/service/NetworkManager ] ; then
test_network nm
return
fi
for f in $( ls /sys/class/net) ; do
[ " $f " = "lo" ] && continue
addr = $( cat /sys/class/net/$f /address)
DEVICES = " $DEVICES $f $addr "
done
DIALOG --title " Select the network interface to configure " \
--menu " $MENULABEL " ${ MENUSIZE } ${ DEVICES }
if [ $? -eq 0 ] ; then
dev = $( cat $ANSWER )
if $( echo $dev | egrep -q "^wl.*" 2>/dev/null) ; then
configure_wifi $dev
else
configure_net $dev
fi
fi
}
validate_useraccount( ) {
# don't check that USERNAME has been set because it can be empty
local USERLOGIN = $( get_option USERLOGIN)
local USERPASSWORD = $( get_option USERPASSWORD)
local USERGROUPS = $( get_option USERGROUPS)
if [ -n " $USERLOGIN " ] && [ -n " $USERPASSWORD " ] && [ -n " $USERGROUPS " ] ; then
USERACCOUNT_DONE = 1
fi
}
validate_filesystems( ) {
local mnts dev size fstype mntpt mkfs rootfound fmt
local usrfound efi_system_partition
local bootdev = $( get_option BOOTLOADER)
unset TARGETFS
mnts = $( grep -E '^MOUNTPOINT.*' $CONF_FILE )
set -- ${ mnts }
while [ $# -ne 0 ] ; do
fmt = ""
dev = $2 ; fstype = $3 ; size = $4 ; mntpt = " $5 " ; mkfs = $6
shift 6
if [ " $mntpt " = "/" ] ; then
rootfound = 1
elif [ " $mntpt " = "/usr" ] ; then
usrfound = 1
elif [ " $fstype " = "vfat" -a " $mntpt " = "/boot/efi" ] ; then
efi_system_partition = 1
fi
if [ " $mkfs " -eq 1 ] ; then
fmt = "NEW FILESYSTEM: "
fi
if [ -z " $TARGETFS " ] ; then
TARGETFS = " ${ fmt } $dev ( $size ) mounted on $mntpt as ${ fstype } \n "
else
TARGETFS = " ${ TARGETFS } ${ fmt } ${ dev } ( $size ) mounted on $mntpt as ${ fstype } \n "
fi
done
if [ -z " $rootfound " ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
the mount point for the root filesystem ( /) has not yet been configured." ${ MSGBOXSIZE }
return 1
elif [ -n " $usrfound " ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
/usr mount point has been configured but is not supported, please remove it to continue ." ${ MSGBOXSIZE }
return 1
elif [ -n " $EFI_SYSTEM " -a " $bootdev " != "none" -a -z " $efi_system_partition " ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
The EFI System Partition has not yet been configured, please create it\n
as FAT32, mountpoint /boot/efi and at least with 100MB of size." ${ MSGBOXSIZE }
return 1
fi
FILESYSTEMS_DONE = 1
}
create_filesystems( ) {
local mnts dev mntpt fstype fspassno mkfs size rv uuid
mnts = $( grep -E '^MOUNTPOINT.*' $CONF_FILE | sort -k 5)
set -- ${ mnts }
while [ $# -ne 0 ] ; do
dev = $2 ; fstype = $3 ; mntpt = " $5 " ; mkfs = $6
shift 6
# swap partitions
if [ " $fstype " = "swap" ] ; then
swapoff $dev >/dev/null 2>& 1
if [ " $mkfs " -eq 1 ] ; then
mkswap $dev >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
failed to create swap on ${ dev } !\n check $LOG for errors." ${ MSGBOXSIZE }
DIE 1
fi
fi
swapon $dev >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
failed to activate swap on $dev !\n check $LOG for errors." ${ MSGBOXSIZE }
DIE 1
fi
# Add entry for target fstab
uuid = $( blkid -o value -s UUID " $dev " )
echo " UUID= $uuid none swap defaults 0 0 " >>$TARGET_FSTAB
continue
fi
if [ " $mkfs " -eq 1 ] ; then
case " $fstype " in
btrfs) MKFS = "mkfs.btrfs -f" ; modprobe btrfs >$LOG 2>& 1; ;
ext2) MKFS = "mke2fs -F" ; modprobe ext2 >$LOG 2>& 1; ;
ext3) MKFS = "mke2fs -F -j" ; modprobe ext3 >$LOG 2>& 1; ;
ext4) MKFS = "mke2fs -F -t ext4" ; modprobe ext4 >$LOG 2>& 1; ;
f2fs) MKFS = "mkfs.f2fs -f" ; modprobe f2fs >$LOG 2>& 1; ;
vfat) MKFS = "mkfs.vfat -F32" ; modprobe vfat >$LOG 2>& 1; ;
xfs) MKFS = "mkfs.xfs -f -i sparse=0" ; modprobe xfs >$LOG 2>& 1; ;
esac
TITLE = " Check $LOG for details ... "
INFOBOX " Creating filesystem $fstype on $dev for $mntpt ... " 8 60
echo " Running $MKFS $dev ... " >$LOG
$MKFS $dev >$LOG 2>& 1; rv = $?
if [ $rv -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
failed to create filesystem $fstype on $dev !\n check $LOG for errors." ${ MSGBOXSIZE }
DIE 1
fi
fi
# Mount rootfs the first one.
[ " $mntpt " != "/" ] && continue
mkdir -p $TARGETDIR
echo " Mounting $dev on $mntpt ( $fstype )... " >$LOG
mount -t $fstype $dev $TARGETDIR >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
failed to mount $dev on ${ mntpt } ! check $LOG for errors." ${ MSGBOXSIZE }
DIE 1
fi
# Add entry to target fstab
uuid = $( blkid -o value -s UUID " $dev " )
if [ " $fstype " = "f2fs" -o " $fstype " = "btrfs" -o " $fstype " = "xfs" ] ; then
fspassno = 0
else
fspassno = 1
fi
echo " UUID= $uuid $mntpt $fstype defaults 0 $fspassno " >>$TARGET_FSTAB
done
# mount all filesystems in target rootfs
mnts = $( grep -E '^MOUNTPOINT.*' $CONF_FILE | sort -k 5)
set -- ${ mnts }
while [ $# -ne 0 ] ; do
dev = $2 ; fstype = $3 ; mntpt = " $5 "
shift 6
[ " $mntpt " = "/" -o " $fstype " = "swap" ] && continue
mkdir -p ${ TARGETDIR } ${ mntpt }
echo " Mounting $dev on $mntpt ( $fstype )... " >$LOG
mount -t $fstype $dev ${ TARGETDIR } ${ mntpt } >$LOG 2>& 1
if [ $? -ne 0 ] ; then
DIALOG --msgbox " ${ BOLD } ${ RED } ERROR: ${ RESET } \
failed to mount $dev on $mntpt ! check $LOG for errors." ${ MSGBOXSIZE }
DIE
fi
# Add entry to target fstab
uuid = $( blkid -o value -s UUID " $dev " )
if [ " $fstype " = "f2fs" -o " $fstype " = "btrfs" -o " $fstype " = "xfs" ] ; then
fspassno = 0
else
fspassno = 2
fi
echo " UUID= $uuid $mntpt $fstype defaults 0 $fspassno " >>$TARGET_FSTAB
done
}
mount_filesystems( ) {
for f in sys proc dev; do
[ ! -d $TARGETDIR /$f ] && mkdir $TARGETDIR /$f
echo " Mounting $TARGETDIR / $f ... " >$LOG
mount --rbind /$f $TARGETDIR /$f >$LOG 2>& 1
done
}
umount_filesystems( ) {
local mnts = " $( grep -E '^MOUNTPOINT.*swap.*$' $CONF_FILE | sort -r -k 5) "
set -- ${ mnts }
while [ $# -ne 0 ] ; do
local dev = $2 ; local fstype = $3
shift 6
if [ " $fstype " = "swap" ] ; then
echo " Disabling swap space on $dev ... " >$LOG
swapoff $dev >$LOG 2>& 1
continue
fi
done
echo " Unmounting $TARGETDIR ... " >$LOG
umount -R $TARGETDIR >$LOG 2>& 1
}
log_and_count( ) {
local progress whole tenth
while read line; do
echo " $line " >$LOG
copy_count = $(( copy_count + 1 ))
progress = $(( 1000 * copy_count / copy_total))
if [ " $progress " != " $copy_progress " ] ; then
whole = $(( progress / 10 ))
tenth = $(( progress % 10 ))
printf "Progress: %d.%d%% (%d of %d files)\n" $whole $tenth $copy_count $copy_total
copy_progress = $progress
fi
done
}
copy_rootfs( ) {
local tar_in = "--create --one-file-system --xattrs"
TITLE = " Check $LOG for details ... "
INFOBOX "Counting files, please be patient ..." 4 60
copy_total = $( tar ${ tar_in } -v -f /dev/null / 2>/dev/null | wc -l)
export copy_total copy_count = 0 copy_progress =
clear
tar ${ tar_in } -f - / 2>/dev/null | \
tar --extract --xattrs --xattrs-include= '*' --preserve-permissions -v -f - -C $TARGETDIR | \
log_and_count | \
DIALOG --title " ${ TITLE } " \
--progressbox "Copying live image to target rootfs." 5 60
if [ $? -ne 0 ] ; then
DIE 1
fi
unset copy_total copy_count copy_percent
}
install_packages( ) {
local _grub = _syspkg =
if [ -n " $EFI_SYSTEM " ] ; then
if [ $EFI_FW_BITS -eq 32 ] ; then
_grub = "grub-i386-efi"
else
_grub = "grub-x86_64-efi"
fi
else
_grub = "grub"
fi
_syspkg = "base-system"
mkdir -p $TARGETDIR /var/db/xbps/keys $TARGETDIR /usr/share
cp -a /usr/share/xbps.d $TARGETDIR /usr/share/
cp /var/db/xbps/keys/*.plist $TARGETDIR /var/db/xbps/keys
if [ -n " $MIRROR_DONE " ] ; then
mkdir -p $TARGETDIR /etc
cp -a /etc/xbps.d $TARGETDIR /etc
fi
mkdir -p $TARGETDIR /boot/grub
_arch = $( xbps-uhelper arch)
stdbuf -oL env XBPS_ARCH = ${ _arch } \
xbps-install -r $TARGETDIR -SyU ${ _syspkg } ${ _grub } 2>& 1 | \
DIALOG --title "Installing base system packages..." \
--programbox 24 80
if [ $? -ne 0 ] ; then
DIE 1
fi
xbps-reconfigure -r $TARGETDIR -f base-files >/dev/null 2>& 1
chroot $TARGETDIR xbps-reconfigure -a
}
enable_service( ) {
ln -sf /etc/sv/$1 $TARGETDIR /etc/runit/runsvdir/default/$1
}
menu_install( ) {
ROOTPASSWORD_DONE = " $( get_option ROOTPASSWORD) "
BOOTLOADER_DONE = " $( get_option BOOTLOADER) "
if [ -z " $ROOTPASSWORD_DONE " ] ; then
DIALOG --msgbox " ${ BOLD } The root password has not been configured, \
please do so before starting the installation.${ RESET } " ${ MSGBOXSIZE }
return 1
elif [ -z " $BOOTLOADER_DONE " ] ; then
DIALOG --msgbox " ${ BOLD } The disk to install the bootloader has not been \
configured, please do so before starting the installation.${ RESET } " ${ MSGBOXSIZE }
return 1
fi
# Validate filesystems after making sure bootloader is done,
# so that specific checks can be made based on the selection
validate_filesystems || return 1
if [ -z " $FILESYSTEMS_DONE " ] ; then
DIALOG --msgbox " ${ BOLD } Required filesystems were not configured, \
please do so before starting the installation.${ RESET } " ${ MSGBOXSIZE }
return 1
fi
# Validate useraccount. All parameters must be set (name, password, login name, groups).
validate_useraccount
if [ -z " $USERACCOUNT_DONE " ] ; then
DIALOG --yesno " ${ BOLD } The user account is not set up properly. ${ RESET } \n\n
${ BOLD } ${ RED } WARNING: no user will be created. You will only be able to login \
with the root user in your new system.${ RESET } \n \n
${ BOLD } Do you want to continue ?${ RESET } " 10 60 || return
fi
DIALOG --yesno " ${ BOLD } The following operations will be executed: ${ RESET } \n\n
${ BOLD } ${ TARGETFS } ${ RESET } \n
${ BOLD } ${ RED } WARNING: data on partitions will be COMPLETELY DESTROYED for new \
filesystems.${ RESET } \n \n
${ BOLD } Do you want to continue ?${ RESET } " 20 80 || return
unset TARGETFS
# Create and mount filesystems
create_filesystems
SOURCE_DONE = " $( get_option SOURCE) "
# If source not set use defaults.
if [ " $( get_option SOURCE) " = "local" -o -z " $SOURCE_DONE " ] ; then
copy_rootfs
. /etc/default/live.conf
rm -f $TARGETDIR /etc/motd
rm -f $TARGETDIR /etc/issue
2024-10-28 11:24:03 -01:00
rm -f $TARGETDIR /usr/sbin/pep-installer
2024-10-27 15:16:46 -01:00
# Remove modified sddm.conf to let sddm use the defaults.
rm -f $TARGETDIR /etc/sddm.conf
# Remove live user.
echo " Removing $USERNAME live user from targetdir ... " >$LOG
chroot $TARGETDIR userdel -r $USERNAME >$LOG 2>& 1
2024-10-28 11:24:03 -01:00
rm -f $TARGETDIR /etc/sudoers.d/99-pep-live
2024-10-27 15:16:46 -01:00
sed -i " s,GETTY_ARGS=\"--noclear -a $USERNAME \",GETTY_ARGS=\"--noclear\",g " $TARGETDIR /etc/sv/agetty-tty1/conf
TITLE = " Check $LOG for details ... "
INFOBOX "Rebuilding initramfs for target ..." 4 60
echo "Rebuilding initramfs for target ..." >$LOG
# mount required fs
mount_filesystems
chroot $TARGETDIR dracut --no-hostonly --add-drivers "ahci" --force >>$LOG 2>& 1
INFOBOX "Removing temporary packages from target ..." 4 60
echo "Removing temporary packages from target ..." >$LOG
TO_REMOVE = "dialog xtools-minimal xmirror"
# only remove espeakup and brltty if it wasn't enabled in the live environment
if ! [ -e "/var/service/espeakup" ] ; then
TO_REMOVE += " espeakup"
fi
if ! [ -e "/var/service/brltty" ] ; then
TO_REMOVE += " brltty"
fi
xbps-remove -r $TARGETDIR -Ry $TO_REMOVE >>$LOG 2>& 1
rmdir $TARGETDIR /mnt/target
else
# mount required fs
mount_filesystems
# network install, use packages.
install_packages
fi
INFOBOX "Applying installer settings..." 4 60
# copy target fstab.
install -Dm644 $TARGET_FSTAB $TARGETDIR /etc/fstab
# Mount /tmp as tmpfs.
echo "tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0" >> $TARGETDIR /etc/fstab
# set up keymap, locale, timezone, hostname, root passwd and user account.
set_keymap
set_locale
set_timezone
set_hostname
set_rootpassword
set_useraccount
# Copy /etc/skel files for root.
cp $TARGETDIR /etc/skel/.[ bix] * $TARGETDIR /root
NETWORK_DONE = " $( get_option NETWORK) "
# network settings for target
if [ -n " $NETWORK_DONE " ] ; then
local net = " $( get_option NETWORK) "
set -- ${ net }
local _dev = " $1 " _type = " $2 " _ip = " $3 " _gw = " $4 " _dns1 = " $5 " _dns2 = " $6 "
if [ -z " $_type " ] ; then
# network type empty??!!!
:
elif [ " $_type " = "dhcp" ] ; then
if $( echo $_dev | egrep -q "^wl.*" 2>/dev/null) ; then
cp /etc/wpa_supplicant/wpa_supplicant.conf $TARGETDIR /etc/wpa_supplicant
ln -sf /etc/sv/wpa_supplicant $TARGETDIR /etc/runit/runsvdir/default/wpa_supplicant
fi
enable_service dhcpcd
elif [ -n " $_dev " -a " $_type " = "static" ] ; then
# static IP through dhcpcd.
mv $TARGETDIR /etc/dhcpcd.conf $TARGETDIR /etc/dhcpcd.conf.orig
2024-10-28 11:24:03 -01:00
echo " # Static IP configuration set by the pep-installer for $_dev . " \
2024-10-27 15:16:46 -01:00
>$TARGETDIR /etc/dhcpcd.conf
echo " interface $_dev " >>$TARGETDIR /etc/dhcpcd.conf
echo " static ip_address= $_ip " >>$TARGETDIR /etc/dhcpcd.conf
echo " static routers= $_gw " >>$TARGETDIR /etc/dhcpcd.conf
echo " static domain_name_servers= $_dns1 $_dns2 " >>$TARGETDIR /etc/dhcpcd.conf
enable_service dhcpcd
fi
fi
if [ -d $TARGETDIR /etc/sudoers.d ] ; then
USERLOGIN = " $( get_option USERLOGIN) "
if [ -z " $( echo $( get_option USERGROUPS) | grep -w wheel) " -a -n " $USERLOGIN " ] ; then
# enable sudo for primary user USERLOGIN who is not member of wheel
echo " # Enable sudo for login ' $USERLOGIN ' " > " $TARGETDIR /etc/sudoers.d/ $USERLOGIN "
echo " $USERLOGIN ALL=(ALL:ALL) ALL " >> " $TARGETDIR /etc/sudoers.d/ $USERLOGIN "
else
# enable the sudoers entry for members of group wheel
echo "%wheel ALL=(ALL:ALL) ALL" > " $TARGETDIR /etc/sudoers.d/wheel "
fi
unset USERLOGIN
fi
# clean up polkit rule - it's only useful in live systems
2024-10-28 11:24:03 -01:00
rm -f $TARGETDIR /etc/polkit-1/rules.d/pep-live.rules
2024-10-27 15:16:46 -01:00
# enable text console for grub if chosen
if [ " $( get_option TEXTCONSOLE) " = "1" ] ; then
sed -i $TARGETDIR /etc/default/grub \
-e 's|#\(GRUB_TERMINAL_INPUT\).*|\1=console|' \
-e 's|#\(GRUB_TERMINAL_OUTPUT\).*|\1=console|'
fi
# install bootloader.
set_bootloader
sync && sync && sync
# unmount all filesystems.
umount_filesystems
# installed successfully.
2024-10-28 11:24:03 -01:00
DIALOG --yesno " ${ BOLD } Peppermintos has been installed successfully! ${ RESET } \n
2024-10-27 15:16:46 -01:00
Do you want to reboot the system?" ${ YESNOSIZE }
if [ $? -eq 0 ] ; then
shutdown -r now
else
return
fi
}
menu_source( ) {
local src =
DIALOG --title " Select installation source " \
--menu " $MENULABEL " 8 70 0 \
"Local" "Packages from ISO image" \
"Network" "Base system only, downloaded from official repository"
case " $( cat $ANSWER ) " in
"Local" ) src = "local" ; ;
"Network" ) src = "net" ;
if [ -z " $NETWORK_DONE " ] ; then
if test_network; then
menu_network
fi
fi ; ;
*) return 1; ;
esac
SOURCE_DONE = 1
set_option SOURCE $src
}
menu_mirror( ) {
xmirror 2>$LOG && MIRROR_DONE = 1
}
menu( ) {
local AFTER_HOSTNAME
if [ -z " $DEFITEM " ] ; then
DEFITEM = "Keyboard"
fi
if xbps-uhelper arch | grep -qe '-musl$' ; then
AFTER_HOSTNAME = "Timezone"
DIALOG --default-item $DEFITEM \
--extra-button --extra-label "Settings" \
2024-10-28 11:24:03 -01:00
--title " Peppermintos installation menu " \
2024-10-27 15:16:46 -01:00
--menu " $MENULABEL " 10 70 0 \
"Keyboard" "Set system keyboard" \
"Network" "Set up the network" \
"Source" "Set source installation" \
"Mirror" "Select XBPS mirror" \
"Hostname" "Set system hostname" \
"Timezone" "Set system time zone" \
"RootPassword" "Set system root password" \
"UserAccount" "Set primary user name and password" \
"BootLoader" "Set disk to install bootloader" \
"Partition" "Partition disk(s)" \
"Filesystems" "Configure filesystems and mount points" \
"Install" "Start installation with saved settings" \
"Exit" "Exit installation"
else
AFTER_HOSTNAME = "Locale"
DIALOG --default-item $DEFITEM \
--extra-button --extra-label "Settings" \
2024-10-28 11:24:03 -01:00
--title " Peppermintos installation menu " \
2024-10-27 15:16:46 -01:00
--menu " $MENULABEL " 10 70 0 \
"Keyboard" "Set system keyboard" \
"Network" "Set up the network" \
"Source" "Set source installation" \
"Mirror" "Select XBPS mirror" \
"Hostname" "Set system hostname" \
"Locale" "Set system locale" \
"Timezone" "Set system time zone" \
"RootPassword" "Set system root password" \
"UserAccount" "Set primary user name and password" \
"BootLoader" "Set disk to install bootloader" \
"Partition" "Partition disk(s)" \
"Filesystems" "Configure filesystems and mount points" \
"Install" "Start installation with saved settings" \
"Exit" "Exit installation"
fi
if [ $? -eq 3 ] ; then
# Show settings
cp $CONF_FILE /tmp/conf_hidden.$$ ;
sed -i "s/^ROOTPASSWORD.*/ROOTPASSWORD <-hidden->/" /tmp/conf_hidden.$$
sed -i "s/^USERPASSWORD.*/USERPASSWORD <-hidden->/" /tmp/conf_hidden.$$
DIALOG --title "Saved settings for installation" --textbox /tmp/conf_hidden.$$ 14 60
rm /tmp/conf_hidden.$$
return
fi
case $( cat $ANSWER ) in
"Keyboard" ) menu_keymap && [ -n " $KEYBOARD_DONE " ] && DEFITEM = "Network" ; ;
"Network" ) menu_network && [ -n " $NETWORK_DONE " ] && DEFITEM = "Source" ; ;
"Source" ) menu_source && [ -n " $SOURCE_DONE " ] && DEFITEM = "Mirror" ; ;
"Mirror" ) menu_mirror && [ -n " $MIRROR_DONE " ] && DEFITEM = "Hostname" ; ;
"Hostname" ) menu_hostname && [ -n " $HOSTNAME_DONE " ] && DEFITEM = " $AFTER_HOSTNAME " ; ;
"Locale" ) menu_locale && [ -n " $LOCALE_DONE " ] && DEFITEM = "Timezone" ; ;
"Timezone" ) menu_timezone && [ -n " $TIMEZONE_DONE " ] && DEFITEM = "RootPassword" ; ;
"RootPassword" ) menu_rootpassword && [ -n " $ROOTPASSWORD_DONE " ] && DEFITEM = "UserAccount" ; ;
"UserAccount" ) menu_useraccount && [ -n " $USERLOGIN_DONE " ] && [ -n " $USERPASSWORD_DONE " ] \
&& DEFITEM = "BootLoader" ; ;
"BootLoader" ) menu_bootloader && [ -n " $BOOTLOADER_DONE " ] && DEFITEM = "Partition" ; ;
"Partition" ) menu_partitions && [ -n " $PARTITIONS_DONE " ] && DEFITEM = "Filesystems" ; ;
"Filesystems" ) menu_filesystems && [ -n " $FILESYSTEMS_DONE " ] && DEFITEM = "Install" ; ;
"Install" ) menu_install; ;
"Exit" ) DIE; ;
*) DIALOG --yesno "Abort Installation?" ${ YESNOSIZE } && DIE
esac
}
if ! command -v dialog >/dev/null; then
echo "ERROR: missing dialog command, exiting..."
exit 1
fi
if [ " $( id -u) " != "0" ] ; then
2024-10-28 11:24:03 -01:00
echo "pep-installer must run as root" 1>& 2
2024-10-27 15:16:46 -01:00
exit 1
fi
#
# main()
#
2024-10-28 11:24:03 -01:00
DIALOG --title " ${ BOLD } ${ RED } Enter the pep ... ${ RESET } " --msgbox " \n
Welcome to the Peppermintos installation. A simple and minimal \
2024-10-27 15:16:46 -01:00
Linux distribution made from scratch and built from the source package tree \
available for XBPS, a new alternative binary package system.\n \n
The installation should be pretty straightforward. If you are in trouble \
2024-10-28 11:24:03 -01:00
please join us at ${ BOLD } #Peppermintos${RESET} on ${BOLD}irc.libera.chat${RESET}.\n\n
${ BOLD } https://peppermintos.com/${ RESET } \n \n " 16 80
2024-10-27 15:16:46 -01:00
while true; do
menu
done
exit 0
# vim: set ts=4 sw=4 et:
