diff --git a/BldHelper-32-non-pae-release.sh b/BldHelper-32-non-pae-release.sh
new file mode 100755
index 00000000..364aeca0
--- /dev/null
+++ b/BldHelper-32-non-pae-release.sh
@@ -0,0 +1,73 @@
+#!/bin/bash
+
+# BldHelper-release.sh
+# This script is meant to be run on the build server and expects to find and update itself from adjacent repos.
+# From PepDistroConfigs, these repos are ../PepProPixMaps & ../PepProTools and are vital to having a working build.
+
+### ## # Set build working variables HERE # ## ###
+
+PREFIX=My-distro-debian 	# Sets a unique final name of the ISO and checksum so <HouseKeeping> only removes 2 files .
+SUFFIX=i386		# Also used by <HouseKeeping>. And to distinguish between amd64 and x86 or devuan and ubuntu .
+BUILD=release		# Sets which pepbld.sh to use and the location in /var/www/html/[release|rc|testing|nightly|unstable]
+
+##################################################
+### ## # Make NO Edits Below This Line !! # ## ###
+##################################################
+
+[ $TODAY ! = " " ] || TODAY=$(date -u +"%Y-%m-%d")	# If MasterBuilder.sh is used IT will set the date. If not used, we set it here.
+FileName="${PREFIX}-${SUFFIX}"				# This will give a uniquely named and dated ISO and checksum for <HouseKeeping>.
+LOCATION=/var/www/acoroslinux.tk/repos/${BUILD}				# Tells <HouseKeeping> and the script which 2 files to remove and where to put them.
+LogDir=/repos/builds/logs/				# This folder contains a log for the last $[PREFIX]-$[SUFFIX] build.
+WorkDir=/repos/my-distro-builds/	# * If we change servers or locations T*H*I*S line is the O*N*L*Y line to change. *
+_break=0 ; _wait=30	# Time (in seconds) to wait
+
+# Move into the builder directory.
+# Make sure the local repos are up to date.
+cd  /repos/builds/my-distro-builds/
+d /My-distro-configs-debian && git pull --ff-only
+
+# Run the build script - expect 50 minutes, allow 60.
+ ./build-32-non-pae.sh 2>&1 | tee -a /tmp/${FileName}.out
+
+
+# Timing matters, don't destroy the old one without a replacement.
+# Check for the ISO to appear and wait for things to settle.
+until [ -e build/*.iso ]
+      do ((++_break))
+	 [ $_break -gt $_wait ] && break || sleep 1
+done
+
+if [ ${_break} -lt ${_wait} ] ; then
+### 10 June, 2022 - After 17 June, this comment and the following line can be removed
+echo -e "\n\tISO appeared after $_break seconds.\n" | tee --append /tmp/${FileName}.out
+
+mv build/*.iso build/${FileName}.iso
+
+# Make the checksum file.
+cd build
+echo "# ${FileName} ${TODAY}" > ${FileName}-sha512.checksum
+sha512sum ${FileName}.iso >> ${FileName}-sha512.checksum
+
+### <HouseKeeping>
+# Remove the previous files in ${LOCATION} .
+rm -f ${LOCATION}/${FileName}*.iso
+rm -f ${LOCATION}/${FileName}*-sha512.checksum
+
+#mv $(FileName}*  ${LOCATION}/
+mv ${FileName}.iso             ${LOCATION}/${FileName}.iso
+mv ${FileName}-sha512.checksum ${LOCATION}/${FileName}-sha512.checksum
+
+# touch -t ${_stamp} ${LOCATION} ${LOCATION}/${FileName}*
+touch ${LOCATION}/${FileName}*
+
+lb clean &
+
+# Move the log file to the log directory.
+[ ! -e ${LogDir} ] && mkdir -p ${LogDir}
+mv /tmp/${FileName}.out ${LogDir}/${FileName}-${BUILD}.log
+### </HouseKeeping>
+
+else echo -e "\n\tAfter $_break seconds, ISO never appeared.\n" | tee --append /tmp/${FileName}.out
+     mv /tmp/${FileName}.out ${LogDir}/${FileName}-${BUILD}.log
+fi
+
diff --git a/BldHelper-32-release.sh b/BldHelper-32-release.sh
new file mode 100755
index 00000000..405bf561
--- /dev/null
+++ b/BldHelper-32-release.sh
@@ -0,0 +1,73 @@
+#!/bin/bash
+
+# BldHelper-release.sh
+# This script is meant to be run on the build server and expects to find and update itself from adjacent repos.
+# From PepDistroConfigs, these repos are ../PepProPixMaps & ../PepProTools and are vital to having a working build.
+
+### ## # Set build working variables HERE # ## ###
+
+PREFIX=My-distro-debian 	# Sets a unique final name of the ISO and checksum so <HouseKeeping> only removes 2 files .
+SUFFIX=i386-pae		# Also used by <HouseKeeping>. And to distinguish between amd64 and x86 or devuan and ubuntu .
+BUILD=release		# Sets which pepbld.sh to use and the location in /var/www/html/[release|rc|testing|nightly|unstable]
+
+##################################################
+### ## # Make NO Edits Below This Line !! # ## ###
+##################################################
+
+[ $TODAY ! = " " ] || TODAY=$(date -u +"%Y-%m-%d")	# If MasterBuilder.sh is used IT will set the date. If not used, we set it here.
+FileName="${PREFIX}-${SUFFIX}"				# This will give a uniquely named and dated ISO and checksum for <HouseKeeping>.
+LOCATION=/var/www/acoroslinux.tk/repos/${BUILD}				# Tells <HouseKeeping> and the script which 2 files to remove and where to put them.
+LogDir=/repos/builds/logs/				# This folder contains a log for the last $[PREFIX]-$[SUFFIX] build.
+WorkDir=/repos/my-distro-builds/	# * If we change servers or locations T*H*I*S line is the O*N*L*Y line to change. *
+_break=0 ; _wait=30	# Time (in seconds) to wait
+
+# Move into the builder directory.
+# Make sure the local repos are up to date.
+cd  /repos/builds/my-distro-builds/
+cd /My-distro-configs-debian && git pull --ff-only
+
+# Run the build script - expect 50 minutes, allow 60.
+ ./build-32.sh 2>&1 | tee -a /tmp/${FileName}.out
+
+
+# Timing matters, don't destroy the old one without a replacement.
+# Check for the ISO to appear and wait for things to settle.
+until [ -e build/*.iso ]
+      do ((++_break))
+	 [ $_break -gt $_wait ] && break || sleep 1
+done
+
+if [ ${_break} -lt ${_wait} ] ; then
+### 10 June, 2022 - After 17 June, this comment and the following line can be removed
+echo -e "\n\tISO appeared after $_break seconds.\n" | tee --append /tmp/${FileName}.out
+
+mv build/*.iso build/${FileName}.iso
+
+# Make the checksum file.
+cd build
+echo "# ${FileName} ${TODAY}" > ${FileName}-sha512.checksum
+sha512sum ${FileName}.iso >> ${FileName}-sha512.checksum
+
+### <HouseKeeping>
+# Remove the previous files in ${LOCATION} .
+rm -f ${LOCATION}/${FileName}*.iso
+rm -f ${LOCATION}/${FileName}*-sha512.checksum
+
+#mv $(FileName}*  ${LOCATION}/
+mv ${FileName}.iso             ${LOCATION}/${FileName}.iso
+mv ${FileName}-sha512.checksum ${LOCATION}/${FileName}-sha512.checksum
+
+# touch -t ${_stamp} ${LOCATION} ${LOCATION}/${FileName}*
+touch ${LOCATION}/${FileName}*
+
+lb clean &
+
+# Move the log file to the log directory.
+[ ! -e ${LogDir} ] && mkdir -p ${LogDir}
+mv /tmp/${FileName}.out ${LogDir}/${FileName}-${BUILD}.log
+### </HouseKeeping>
+
+else echo -e "\n\tAfter $_break seconds, ISO never appeared.\n" | tee --append /tmp/${FileName}.out
+     mv /tmp/${FileName}.out ${LogDir}/${FileName}-${BUILD}.log
+fi
+
diff --git a/BldHelper-64-release.sh b/BldHelper-64-release.sh
new file mode 100755
index 00000000..e56fe987
--- /dev/null
+++ b/BldHelper-64-release.sh
@@ -0,0 +1,74 @@
+#!/bin/bash
+
+# BldHelper-release.sh
+# This script is meant to be run on the build server and expects to find and update itself from adjacent repos.
+# From PepDistroConfigs, these repos are ../PepProPixMaps & ../PepProTools and are vital to having a working build.
+
+### ## # Set build working variables HERE # ## ###
+
+PREFIX=My-distro-debian 	# Sets a unique final name of the ISO and checksum so <HouseKeeping> only removes 2 files .
+SUFFIX=amd64		# Also used by <HouseKeeping>. And to distinguish between amd64 and x86 or devuan and ubuntu .
+BUILD=release		# Sets which pepbld.sh to use and the location in /var/www/html/[release|rc|testing|nightly|unstable]
+
+##################################################
+### ## # Make NO Edits Below This Line !! # ## ###
+##################################################
+
+[ $TODAY ! = " " ] || TODAY=$(date -u +"%Y-%m-%d")	# If MasterBuilder.sh is used IT will set the date. If not used, we set it here.
+FileName="${PREFIX}-${SUFFIX}"				# This will give a uniquely named and dated ISO and checksum for <HouseKeeping>.
+LOCATION=/var/www/acoroslinux.tk/repos/${BUILD}				# Tells <HouseKeeping> and the script which 2 files to remove and where to put them.
+LogDir=/repos/builds/logs/				# This folder contains a log for the last $[PREFIX]-$[SUFFIX] build.
+WorkDir=/repos/my-distro-builds/	# * If we change servers or locations T*H*I*S line is the O*N*L*Y line to change. *
+_break=0 ; _wait=30	# Time (in seconds) to wait
+
+# Move into the builder directory.
+# Make sure the local repos are up to date.
+cd /repos/builds/my-distro-builds/
+#cd  ./My-distro-xfce-configs-ubuntu 
+cd /My-distro-configs-debian && git pull --ff-only
+
+# Run the build script - expect 50 minutes, allow 60.
+ ./build-64.sh 2>&1 | tee -a /tmp/${FileName}.out
+
+
+# Timing matters, don't destroy the old one without a replacement.
+# Check for the ISO to appear and wait for things to settle.
+until [ -e build/*.iso ]
+      do ((++_break))
+	 [ $_break -gt $_wait ] && break || sleep 1
+done
+
+if [ ${_break} -lt ${_wait} ] ; then
+### 10 June, 2022 - After 17 June, this comment and the following line can be removed
+echo -e "\n\tISO appeared after $_break seconds.\n" | tee --append /tmp/${FileName}.out
+
+mv build/*.iso build/${FileName}.iso
+
+# Make the checksum file.
+cd build
+echo "# ${FileName} ${TODAY}" > ${FileName}-sha512.checksum
+sha512sum ${FileName}.iso >> ${FileName}-sha512.checksum
+
+### <HouseKeeping>
+# Remove the previous files in ${LOCATION} .
+rm -f ${LOCATION}/${FileName}*.iso
+rm -f ${LOCATION}/${FileName}*-sha512.checksum
+
+#mv $(FileName}*  ${LOCATION}/
+mv ${FileName}.iso             ${LOCATION}/${FileName}.iso
+mv ${FileName}-sha512.checksum ${LOCATION}/${FileName}-sha512.checksum
+
+# touch -t ${_stamp} ${LOCATION} ${LOCATION}/${FileName}*
+touch ${LOCATION}/${FileName}*
+
+lb clean &
+
+# Move the log file to the log directory.
+[ ! -e ${LogDir} ] && mkdir -p ${LogDir}
+mv /tmp/${FileName}.out ${LogDir}/${FileName}-${BUILD}.log
+### </HouseKeeping>
+
+else echo -e "\n\tAfter $_break seconds, ISO never appeared.\n" | tee --append /tmp/${FileName}.out
+     mv /tmp/${FileName}.out ${LogDir}/${FileName}-${BUILD}.log
+fi
+
diff --git a/build-64.sh b/build-64.sh
index 6eba029b..946f4659 100755
--- a/build-64.sh
+++ b/build-64.sh
@@ -231,7 +231,6 @@ mkdir -p $build/build/config/includes.chroot/etc/calamares
 mkdir -p $build/build/config/includes.chroot/usr/share/icons
 mkdir -p $build/build/config/includes.chroot/usr/share/themes
 mkdir -p $build/build/config/includes.chroot/etc/live/config.conf.d
-mkdir -p $build/build/config/includes.chroot/etc/dpkg/origins
 mkdir -p $build/build/config/includes.chroot/usr/sbin
 mkdir -p $build/build/config/includes.chroot/etc/lightdm
 mkdir -p $build/build/config/includes.chroot/usr/share/pixmaps