Updated ISO Profile

changelog.md

@@ -1,5 +1,26 @@
 <h2 align="center">Archcraft : Changelogs</h2>
 
+### July 2023
+- Updated ISO profile with latest archiso
+- Latest base with new packages
+- Fixed `xfce-power-manager` issue (not locking the screen on lid close)
+- Fixed sddm not saving the last used session issue
+- Added a calculator app
+- **`Openbox WM`**
+  - Added `tint2` as alternate panel (in all themes)
+  - Ability to switch between panels
+  - Added `bluetooth` module on both panels
+  - Added a rofi `bluetooth` applet
+  - Fixed window resizing issue via each side of window
+  - etc
+- **`BSPWM`**
+  - Added `bluetooth` module on polybar (in all themes)
+  - Added a rofi `bluetooth` applet
+  - etc
+- Many small bugs fixed.
+
+#
+
 ### April 2023
 **`Update (1st May): `** 
 - Fixed `pacman-init` issue in last ISO.

profile/airootfs/etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml

@@ -0,0 +1,8 @@
+<!-- Copyright (C) 2020-2023 Aditya Shakya <adi1090x@gmail.com> -->
+<?xml version="1.0" encoding="UTF-8"?>
+
+<channel name="xfce4-session" version="1.0">
+  <property name="general" type="empty">
+    <property name="LockCommand" type="string" value="xflock4"/>
+  </property>
+</channel>

profile/airootfs/etc/systemd/network/20-ethernet.network

@@ -7,6 +7,7 @@ Name=eth*
 
 [Network]
 DHCP=yes
+MulticastDNS=yes
 IPv6PrivacyExtensions=yes
 
 # systemd-networkd does not set per-interface-type default route metrics

profile/airootfs/etc/systemd/network/20-wlan.network

@@ -3,6 +3,7 @@ Name=wl*
 
 [Network]
 DHCP=yes
+MulticastDNS=yes
 IPv6PrivacyExtensions=yes
 
 # systemd-networkd does not set per-interface-type default route metrics

profile/airootfs/etc/systemd/resolved.conf.d/archiso.conf

@@ -0,0 +1,4 @@
+# Default systemd-resolved configuration for archiso
+
+[Resolve]
+MulticastDNS=yes

profile/airootfs/root/.automated_script.sh

@@ -16,7 +16,13 @@ automated_script ()
     script="$(script_cmdline)"
     if [[ -n "${script}" && ! -x /tmp/startup_script ]]; then
         if [[ "${script}" =~ ^((http|https|ftp)://) ]]; then
-            curl "${script}" --location --retry-connrefused --retry 10 -s -o /tmp/startup_script >/dev/null
+            # there's no synchronization for network availability before executing this script
+            printf '%s: waiting for network-online.target\n' "$0"
+            until systemctl --quiet is-active network-online.target; do
+                sleep 1
+            done
+            printf '%s: downloading %s\n' "$0" "${script}"
+            curl "${script}" --location --retry-connrefused --retry 10 -s -o /tmp/startup_script
             rt=$?
         else
             cp "${script}" /tmp/startup_script
@@ -24,6 +30,9 @@ automated_script ()
         fi
         if [[ ${rt} -eq 0 ]]; then
             chmod +x /tmp/startup_script
+            printf '%s: executing automated script\n' "$0"
+            # note that script is executed when other services (like pacman-init) may be still in progress, please
+            # synchronize to "systemctl is-system-running --wait" when your script depends on other services
             /tmp/startup_script
         fi
     fi

profile/airootfs/root/customize_airootfs.sh

@@ -28,7 +28,7 @@ _EOF_
 
 ## Enable Parallel Downloads
 sed -i -e 's|#ParallelDownloads.*|ParallelDownloads = 5|g' /etc/pacman.conf
-sed -i -e '/#\[testing\]/Q' /etc/pacman.conf
+sed -i -e '/#\[core-testing\]/Q' /etc/pacman.conf
 
 ## Append archcraft repository to pacman.conf
 cat >> "/etc/pacman.conf" <<- EOL
@@ -36,19 +36,16 @@ cat >> "/etc/pacman.conf" <<- EOL
 	SigLevel = Optional TrustAll
 	Include = /etc/pacman.d/archcraft-mirrorlist
 
-	#[testing]
+	#[core-testing]
 	#Include = /etc/pacman.d/mirrorlist
 
 	[core]
 	Include = /etc/pacman.d/mirrorlist
 
-	[extra]
+	#[extra-testing]
-	Include = /etc/pacman.d/mirrorlist
-
-	#[community-testing]
 	#Include = /etc/pacman.d/mirrorlist
 
-	[community]
+	[extra]
 	Include = /etc/pacman.d/mirrorlist
 
 	# If you want to run 32 bit applications on your x86_64 system,

profile/airootfs/usr/local/bin/xflock4

@@ -4,4 +4,4 @@
 
 ## Script to Lock the session by xfce-power-manager
 
-betterlockscreen --lock
+betterlockscreen --lock &

profile/efiboot/loader/entries/01-archcraftiso-x86_64-linux.conf

@@ -4,4 +4,4 @@ linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 initrd   /%INSTALL_DIR%/boot/intel-ucode.img
 initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n module_blacklist=pcspkr,snd_pcsp
+options  archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n module_blacklist=pcspkr,snd_pcsp

profile/efiboot/loader/entries/02-archcraftiso-x86_64-linux-open-source.conf

@@ -4,4 +4,4 @@ linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 initrd   /%INSTALL_DIR%/boot/intel-ucode.img
 initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nouveau.modeset=1 radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm module_blacklist=pcspkr,snd_pcsp
+options  archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nouveau.modeset=1 radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm module_blacklist=pcspkr,snd_pcsp

profile/efiboot/loader/entries/03-archcraftiso-x86_64-linux-nvidia.conf

@@ -4,4 +4,4 @@ linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 initrd   /%INSTALL_DIR%/boot/intel-ucode.img
 initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux-nvidia.img
-options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nvidia_drm.modeset=1 nouveau.modeset=0 module_blacklist=nouveau radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
+options  archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nvidia_drm.modeset=1 nouveau.modeset=0 module_blacklist=nouveau radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=pcspkr,snd_pcsp

profile/efiboot/loader/entries/04-archcraftiso-x86_64-linux-nomodeset.conf

@@ -4,4 +4,4 @@ linux   /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 initrd   /%INSTALL_DIR%/boot/intel-ucode.img
 initrd   /%INSTALL_DIR%/boot/amd-ucode.img
 initrd   /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-options archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nomodeset module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm nouveau.modeset=0 radeon.modeset=0 i915.modeset=0 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
+options  archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nomodeset module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm nouveau.modeset=0 radeon.modeset=0 i915.modeset=0 nvme_load=yes module_blacklist=pcspkr,snd_pcsp

profile/grub/grub.cfg

@@ -40,43 +40,41 @@ timeout_style=menu
 # Menu entries
 menuentry "Boot Archcraft (x86_64, UEFI)" --class archcraft --class arch --class gnu-linux --class gnu --class os --id 'archcraft' {
     set gfxpayload=keep
-    search --no-floppy --set=root --label %ARCHISO_LABEL%
+    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n module_blacklist=pcspkr,snd_pcsp
-    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n module_blacklist=pcspkr,snd_pcsp
     initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "Boot Archcraft (x86_64, UEFI, open source)" --class archcraft --class arch --class gnu-linux --class gnu --class os --id 'archcraftos' {
     set gfxpayload=keep
-    search --no-floppy --set=root --label %ARCHISO_LABEL%
+    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nouveau.modeset=1 radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm module_blacklist=pcspkr,snd_pcsp
-    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nouveau.modeset=1 radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm module_blacklist=pcspkr,snd_pcsp
     initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 menuentry "Boot Archcraft (x86_64, UEFI, nvidia)" --class archcraft --class arch --class gnu-linux --class gnu --class os --id 'archcraftpn' {
     set gfxpayload=keep
-    search --no-floppy --set=root --label %ARCHISO_LABEL%
+    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nvidia_drm.modeset=1 nouveau.modeset=0 module_blacklist=nouveau radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
-    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nvidia_drm.modeset=1 nouveau.modeset=0 module_blacklist=nouveau radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
     initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux-nvidia.img
 }
 
 menuentry "Boot Archcraft (x86_64, UEFI, nomodeset)" --class archcraft --class arch --class gnu-linux --class gnu --class os --id 'archcraftnm' {
     set gfxpayload=keep
-    search --no-floppy --set=root --label %ARCHISO_LABEL%
+    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisodevice=UUID=${ARCHISO_UUID} quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nomodeset module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm nouveau.modeset=0 radeon.modeset=0 i915.modeset=0 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
-    linux /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nomodeset module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm nouveau.modeset=0 radeon.modeset=0 i915.modeset=0 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
     initrd /%INSTALL_DIR%/boot/intel-ucode.img /%INSTALL_DIR%/boot/amd-ucode.img /%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
 }
 
 if [ "${grub_platform}" == "efi" ]; then
     if [ "${grub_cpu}" == "x86_64" ]; then
-        menuentry "UEFI Shell" --class recovery {
+        menuentry "Run Memtest86+ (RAM test)" --class memtest86 --class memtest --class gnu --class tool {
+            set gfxpayload=800x600,1024x768
+            linux /boot/memtest86+/memtest.efi
+        }
+        menuentry "UEFI Shell" --class recovery --class efi {
             insmod chain
-            search --no-floppy --set=root --label %ARCHISO_LABEL%
             chainloader /shellx64.efi
         }
     elif [ "${grub_cpu}" == "i386" ]; then
-        menuentry "UEFI Shell" --class recovery {
+        menuentry "UEFI Shell" --class recovery --class efi {
             insmod chain
-            search --no-floppy --set=root --label %ARCHISO_LABEL%
             chainloader /shellia32.efi
         }
     fi

profile/mkarchcraftiso

@@ -29,6 +29,7 @@ gpg_key=""
 gpg_sender=""
 iso_name=""
 iso_label=""
+iso_uuid=""
 iso_publisher=""
 iso_application=""
 iso_version=""
@@ -38,6 +39,7 @@ pacman_conf=""
 packages=""
 bootstrap_packages=""
 pacstrap_dir=""
+declare -i rm_work_dir=0
 buildmodes=()
 bootmodes=()
 airootfs_image_type=""
@@ -86,7 +88,7 @@ usage: ${app_name} [options] <profile_dir>
                       Default: '${iso_application}'
      -C <file>        pacman configuration file.
                       Default: '${pacman_conf}'
-     -D <install_dir> Set an install_dir. All files will by located here.
+     -D <install_dir> Set an install_dir. All files will be located here.
                       Default: '${install_dir}'
                       NOTE: Max 8 characters, use only [a-z0-9]
      -L <label>       Set the ISO volume label
@@ -109,6 +111,7 @@ usage: ${app_name} [options] <profile_dir>
                       Default: '${out_dir}'
      -p [package ..]  Package(s) to install.
                       Multiple packages are provided as quoted, space delimited list.
+     -r               Delete the working directory at the end.
      -v               Enable verbose output
      -w <work_dir>    Set the working directory
                       Default: '${work_dir}'
@@ -395,7 +398,7 @@ _make_customize_airootfs() {
                 if [[ ! -d "${pacstrap_dir}${passwd[5]}" ]]; then
                     install -d -m 0750 -o "${passwd[2]}" -g "${passwd[3]}" -- "${pacstrap_dir}${passwd[5]}"
                 fi
-                cp -dnRT --preserve=mode,timestamps,links -- "${pacstrap_dir}/etc/skel/." "${pacstrap_dir}${passwd[5]}"
+                cp -dRT --update=none --preserve=mode,timestamps,links -- "${pacstrap_dir}/etc/skel/." "${pacstrap_dir}${passwd[5]}"
                 chmod -f 0750 -- "${pacstrap_dir}${passwd[5]}"
                 chown -hR -- "${passwd[2]}:${passwd[3]}" "${pacstrap_dir}${passwd[5]}"
             else
@@ -463,6 +466,7 @@ _make_bootmode_bios.syslinux.mbr() {
     install -d -m 0755 -- "${isofs_dir}/boot/syslinux"
     for _cfg in "${profile}/syslinux/"*.cfg; do
         sed "s|%ARCHISO_LABEL%|${iso_label}|g;
+             s|%ARCHISO_UUID%|${iso_uuid}|g;
              s|%INSTALL_DIR%|${install_dir}|g;
              s|%ARCH%|${arch}|g" \
              "${_cfg}" > "${isofs_dir}/boot/syslinux/${_cfg##*/}"
@@ -570,26 +574,25 @@ _make_common_bootmode_grub_copy_to_isofs() {
         files_to_copy+=("${profile}/grub/"!(*.cfg))
     fi
     install -d -m 0755 -- "${isofs_dir}/boot/grub"
-    install -m 0644 -- "${files_to_copy[@]}" "${isofs_dir}/boot/grub/"
+    cp -r --remove-destination -- "${files_to_copy[@]}" "${isofs_dir}/boot/grub/"
 }
 
 # Prepare GRUB configuration files
 _make_common_bootmode_grub_cfg(){
-    local _cfg archiso_uuid search_filename
+    local _cfg search_filename
 
     install -d -- "${work_dir}/grub"
 
-    # Precalculate the ISO's modification date in UTC, i.e. its "UUID"
-    TZ=UTC printf -v archiso_uuid '%(%F-%H-%M-%S-00)T' "$SOURCE_DATE_EPOCH"
     # Create a /boot/grub/YYYY-mm-dd-HH-MM-SS-00.uuid file on ISO 9660. GRUB will search for it to find the ISO
     # volume. This is similar to what grub-mkrescue does, except it places the file in /.disk/, but we opt to use a
     # directory that does not start with a dot to avoid it being accidentally missed when copying the ISO's contents.
-    : > "${work_dir}/grub/${archiso_uuid}.uuid"
+    : > "${work_dir}/grub/${iso_uuid}.uuid"
-    search_filename="/boot/grub/${archiso_uuid}.uuid"
+    search_filename="/boot/grub/${iso_uuid}.uuid"
 
     # Fill GRUB configuration files
     for _cfg in "${profile}/grub/"*'.cfg'; do
         sed "s|%ARCHISO_LABEL%|${iso_label}|g;
+             s|%ARCHISO_UUID%|${iso_uuid}|g;
              s|%INSTALL_DIR%|${install_dir}|g;
              s|%ARCH%|${arch}|g;
              s|%ARCHISO_SEARCH_FILENAME%|${search_filename}|g" \
@@ -838,6 +841,7 @@ _make_bootmode_uefi-x64.systemd-boot.esp() {
     mcopy -i "${efibootimg}" "${profile}/efiboot/loader/loader.conf" ::/loader/
     for _conf in "${profile}/efiboot/loader/entries/"*".conf"; do
         sed "s|%ARCHISO_LABEL%|${iso_label}|g;
+             s|%ARCHISO_UUID%|${iso_uuid}|g;
              s|%INSTALL_DIR%|${install_dir}|g;
              s|%ARCH%|${arch}|g" \
             "${_conf}" | mcopy -i "${efibootimg}" - "::/loader/entries/${_conf##*/}"
@@ -1673,10 +1677,15 @@ _set_overrides() {
     elif [[ -z "$quiet" ]]; then
         quiet="y"
     fi
+    if [[ -v override_rm_work_dir ]]; then
+        rm_work_dir="$override_rm_work_dir"
+    fi
 
     # Set variables that do not have overrides
     [[ -n "$airootfs_image_type" ]] || airootfs_image_type="squashfs"
     [[ -n "$iso_name" ]] || iso_name="${app_name}"
+    # Precalculate the ISO's modification date in UTC, i.e. its "UUID"
+    TZ=UTC printf -v iso_uuid '%(%F-%H-%M-%S-00)T' "$SOURCE_DATE_EPOCH"
 }
 
 _export_gpg_publickey() {
@@ -1743,6 +1752,16 @@ _make_pkglist() {
     _msg_info "Done!"
 }
 
+# Create working directory
+_make_work_dir() {
+    if [[ ! -d "${work_dir}" ]]; then
+        install -d -- "${work_dir}"
+    elif (( rm_work_dir )); then
+        rm_work_dir=0
+        _msg_warning "Working directory removal requested, but '${work_dir}' already exists. It will not be removed!" 0
+    fi
+}
+
 # build the base for an ISO and/or a netboot target
 _build_iso_base() {
     local run_once_mode="base"
@@ -1754,13 +1773,9 @@ _build_iso_base() {
     isofs_dir="${work_dir}/iso"
 
     # Create working directory
-    [[ -d "${work_dir}" ]] || install -d -- "${work_dir}"
+    _run_once _make_work_dir
-    # Write build date to file or if the file exists, read it from there
+    # Write build date to file if it does not exist already
-    if [[ -e "${work_dir}/build_date" ]]; then
+    [[ -e "${work_dir}/build_date" ]] || printf '%s\n' "$SOURCE_DATE_EPOCH" > "${work_dir}/build_date"
-        SOURCE_DATE_EPOCH="$(<"${work_dir}/build_date")"
-    else
-        printf '%s\n' "$SOURCE_DATE_EPOCH" > "${work_dir}/build_date"
-    fi
 
     [[ "${quiet}" == "y" ]] || _show_config
     _run_once _make_pacman_conf
@@ -1837,9 +1852,14 @@ _build() {
     for buildmode in "${buildmodes[@]}"; do
         _run_once "_build_buildmode_${buildmode}"
     done
+    if (( rm_work_dir )); then
+        _msg_info 'Removing the working directory...'
+        rm -rf -- "${work_dir:?}/"
+        _msg_info 'Done!'
+    fi
 }
 
-while getopts 'c:p:C:L:P:A:D:w:m:o:g:G:vh?' arg; do
+while getopts 'c:p:C:L:P:A:D:w:m:o:g:G:vrh?' arg; do
     case "${arg}" in
         p) read -r -a override_pkg_list <<< "${OPTARG}" ;;
         C) override_pacman_conf="${OPTARG}" ;;
@@ -1854,6 +1874,7 @@ while getopts 'c:p:C:L:P:A:D:w:m:o:g:G:vh?' arg; do
         g) override_gpg_key="${OPTARG}" ;;
         G) override_gpg_sender="${OPTARG}" ;;
         v) override_quiet="n" ;;
+        r) declare -i override_rm_work_dir=1 ;;
         h|?) _usage 0 ;;
         *)
             _msg_error "Invalid argument '${arg}'" 0
@@ -1876,6 +1897,13 @@ fi
 # get the absolute path representation of the first non-option argument
 profile="$(realpath -- "${1}")"
 
+# Read SOURCE_DATE_EPOCH from file early
+build_date_file="$(realpath -q -- "${override_work_dir:-./work}/build_date")" || :
+if [[ -f "$build_date_file" ]]; then
+    SOURCE_DATE_EPOCH="$(<"$build_date_file")"
+fi
+unset build_date_file
+
 _read_profile
 _set_overrides
 _validate_options

profile/packages.x86_64

@@ -29,6 +29,7 @@ ethtool
 exfatprogs
 f2fs-tools
 fatresize
+foot-terminfo
 fsarchiver
 gnu-netcat
 gpart
@@ -61,6 +62,7 @@ man-pages
 mc
 mdadm
 #memtest86+
+#memtest86+-efi
 mkinitcpio
 mkinitcpio-archiso
 mkinitcpio-nfs-utils
@@ -114,6 +116,7 @@ usbutils
 vim
 #virtualbox-guest-utils-nox
 vpnc
+wezterm-terminfo
 wireless-regdb
 wireless_tools
 wpa_supplicant
@@ -267,8 +270,10 @@ acpi
 arandr
 dialog
 dunst
+galculator
 gparted
 gtk-engine-murrine
+gnome-keyring
 inetutils
 inotify-tools
 jq

profile/pacman.conf

@@ -70,23 +70,20 @@ LocalFileSigLevel   = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
-#[testing]
-#Include = /etc/pacman.d/mirrorlist
-
 [archcraft]
 SigLevel = Optional TrustAll
 Include = /etc/pacman.d/archcraft-mirrorlist
 
+#[core-testing]
+#Include = /etc/pacman.d/mirrorlist
+
 [core]
 Include = /etc/pacman.d/mirrorlist
 
-[extra]
+#[extra-testing]
-Include = /etc/pacman.d/mirrorlist
-
-#[community-testing]
 #Include = /etc/pacman.d/mirrorlist
 
-[community]
+[extra]
 Include = /etc/pacman.d/mirrorlist
 
 # If you want to run 32 bit applications on your x86_64 system,

profile/profiledef.sh

@@ -2,10 +2,10 @@
 # shellcheck disable=SC2034
 
 iso_name="archcraft"
-iso_label="ARCHCRAFT_$(date +%Y%m)"
+iso_label="ARCHCRAFT_$(date --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}" +%Y%m)"
 iso_publisher="Aditya Shakya <http://www.github.com/adi1090x>"
 iso_application="Archcraft Live/Installation/Rescue CD"
-iso_version="$(date +%Y.%m.%d)"
+iso_version="$(date --date="@${SOURCE_DATE_EPOCH:-$(date +%s)}" +%Y.%m.%d)"
 install_dir="arch"
 buildmodes=('iso')
 bootmodes=('bios.syslinux.mbr' 'bios.syslinux.eltorito'

profile/syslinux/archcraftiso_pxe-linux.cfg

@@ -4,9 +4,9 @@ Boot Archcraft install medium using NBD.
 It allows you to install Archcraft or perform system maintenance.
 ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, NBD)
-LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+LINUX ::/%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD ::/%INSTALL_DIR%/boot/intel-ucode.img,::/%INSTALL_DIR%/boot/amd-ucode.img,::/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} checksum verify
+APPEND archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% archiso_nbd_srv=${pxeserver} cms_verify=y
 SYSAPPEND 3
 
 LABEL arch64_nfs
@@ -15,9 +15,9 @@ Boot Archcraft install medium using NFS.
 It allows you to install Archcraft or perform system maintenance.
 ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, NFS)
-LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+LINUX ::/%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD ::/%INSTALL_DIR%/boot/intel-ucode.img,::/%INSTALL_DIR%/boot/amd-ucode.img,::/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt checksum verify
+APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt cms_verify=y
 SYSAPPEND 3
 
 LABEL arch64_http
@@ -26,7 +26,7 @@ Boot Archcraft install medium using HTTP.
 It allows you to install Archcraft or perform system maintenance.
 ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, HTTP)
-LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
+LINUX ::/%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
-INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
+INITRD ::/%INSTALL_DIR%/boot/intel-ucode.img,::/%INSTALL_DIR%/boot/amd-ucode.img,::/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ checksum verify
+APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ cms_verify=y
 SYSAPPEND 3

profile/syslinux/archcraftiso_sys-linux.cfg

@@ -7,7 +7,7 @@ ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, BIOS)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n module_blacklist=pcspkr,snd_pcsp
+APPEND archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n module_blacklist=pcspkr,snd_pcsp
 
 # Open Source
 LABEL arch64free
@@ -18,7 +18,7 @@ ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, BIOS, open source)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nouveau.modeset=1 radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm module_blacklist=pcspkr,snd_pcsp
+APPEND archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nouveau.modeset=1 radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm module_blacklist=pcspkr,snd_pcsp
 
 # NVIDIA Proprietary
 LABEL arch64nonfree
@@ -29,7 +29,7 @@ ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, BIOS, nvidia)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux-nvidia.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nvidia_drm.modeset=1 nouveau.modeset=0 module_blacklist=nouveau radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
+APPEND archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nvidia_drm.modeset=1 nouveau.modeset=0 module_blacklist=nouveau radeon.modeset=1 i915.modeset=1 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
 
 # Nomodeset
 LABEL arch64nomodeset
@@ -40,4 +40,4 @@ ENDTEXT
 MENU LABEL Boot Archcraft (x86_64, BIOS, nomodeset)
 LINUX /%INSTALL_DIR%/boot/x86_64/vmlinuz-linux
 INITRD /%INSTALL_DIR%/boot/intel-ucode.img,/%INSTALL_DIR%/boot/amd-ucode.img,/%INSTALL_DIR%/boot/x86_64/initramfs-linux.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nomodeset module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm nouveau.modeset=0 radeon.modeset=0 i915.modeset=0 nvme_load=yes module_blacklist=pcspkr,snd_pcsp
+APPEND archisobasedir=%INSTALL_DIR% archisodevice=UUID=%ARCHISO_UUID% quiet splash loglevel=3 udev.log_level=3 vt.global_cursor_default=0 cow_spacesize=5G copytoram=n nomodeset module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm nouveau.modeset=0 radeon.modeset=0 i915.modeset=0 nvme_load=yes module_blacklist=pcspkr,snd_pcsp