Begin cleaning disk definitions, finish all menu points except disk.

2021-04-23 01:33:46 +02:00 · 2021-04-23 01:33:46 +02:00 · 5f7acc58c5
parent d446af1d6a
commit 5f7acc58c5
3 changed files with 172 additions and 73 deletions
--- a/129
+++ b/129
@ -63,9 +63,9 @@ function get_timezone() {
 		echo "$timezone"
 	else
 		# compare files by contents
-		# https://stackoverflow.com/questions/12521114/getting-the-canonical-time-zone-name-in-shell-script#comment88637393_12523283
-		find /usr/share/zoneinfo -type f ! -regex ".*/Etc/.*" -exec \
-			cmp -s {} /etc/localtime \; -print | sed -e 's@.*/zoneinfo/@@' | head -n1
+		find /usr/share/zoneinfo -type f -exec cmp -s {} /etc/localtime \; -print \
+			| sed -e 's,.*/zoneinfo/,,' \
+			| head -1
 	fi
 }

@ -94,6 +94,10 @@ function get_all_keymaps() {
 	done
 }

+function get_all_timezones() {
+	readarray -t ALL_TIMEZONES < <(find /usr/share/zoneinfo -type f -printf "%P\n" | sort -u)
+}
+
 function recalculate_locales() {
 	LOCALES=""
 	N_LOCALES=0
@ -117,19 +121,33 @@ function recalculate_locales() {
 	LOCALES="${LOCALES:1}"
 }

-ALL_PARTITIONING_SCHEMES=("single_disk" "raid0_luks" "btrfs_raid" "zfs_raid")
-PARTITIONING_SCHEME="single_disk"
+ALL_PARTITIONING_SCHEMES=(
+	"classic_single_disk" "Classic single disk layout (boot, swap, root)"
+	"zfs_centric"         "ZFS centric (optional raid0/1 and encryption via zfs)"
+	"btrfs_centric"       "Btrfs centric (optional raid0/1 via btrfs)"
+	"raid0_luks"          "Raid0 (N>=2 disks) and luks for root"
+	"custom"              "Custom (edit the config manually later)"
+)
+PARTITIONING_SCHEME="zfs_centric"

-function create_btrfs_raid_layout() {
-	PARTITIONING_SCHEME="btrfs_raid"
+function create_single_disk_layout() {
+	create_classic_single_disk_layout
+}
+
+function create_classic_single_disk_layout() {
+	PARTITIONING_SCHEME="classic_single_disk"
 }

 function create_raid0_luks_layout() {
-	PARTITIONING_SCHEME="raid0_luks"
+	PARTITIONING_SCHEME="classic_single_disk"
 }

-function create_single_disk_layout() {
-	PARTITIONING_SCHEME="single_disk"
+function create_btrfs_raid_layout() {
+	create_btrfs_centric_layout
+}
+
+function create_btrfs_centric_layout() {
+	PARTITIONING_SCHEME="btrfs_centric"
 }


@ -137,6 +155,7 @@ function create_single_disk_layout() {
 # Configuration constants

 get_all_keymaps
+get_all_timezones
 INIT_SYSTEMS=("systemd" "OpenRC")
 ALL_GENTOO_ARCHS=("x86" "amd64" "arm" "arm64")
 readarray -t SUPPORTED_LOCALES < /usr/share/i18n/SUPPORTED
@ -165,6 +184,8 @@ function load_selected_locales() {
 }

 function process_config() {
+	disk_configuration
+
 	if [[ "$SYSTEMD" == true ]]; then
 		INIT_SYSTEM="systemd"
 	else
@ -322,6 +343,67 @@ function menu_splitlist()  {
 	fi
 }

+# $1: title
+# $2: description
+# $3: default item
+# $@: [tag label]...
+function menu_radiolist_labeled()  {
+	local title="$1"
+	local description="$2"
+	local default_item="$3"
+	shift 3
+
+	# Build option array
+	local items=()
+	local tag
+	local label
+	while [[ "$#" -gt 0 ]]; do
+		tag="$1"
+		label="$2"
+		shift 2
+
+		if [[ $tag == "$default_item" ]]; then
+			items+=("$tag" "$label" "on")
+		else
+			items+=("$tag" "$label" "off")
+		fi
+	done
+
+	# Show selection dialog
+	local sel
+	sel="$(dialog \
+		--no-tags \
+		--title "$title" \
+		--help-button \
+		--help-label "Select" \
+		--help-status \
+		--ok-label "OK" \
+		--default-item "$default_item" \
+		--default-button help \
+		--radiolist "$description\nUse <Select> to select the option under the cursor, or <OK> to use the option which is selected with an asterisk." \
+		"${RADIOLIST_SIZE[@]}" "${items[@]}" 3>&2 2>&1 1>&3 3>&-)"
+
+	local diag_exit="$?"
+	if [[ $diag_exit == 0 ]]; then
+		# <OK>
+		echo -n "$sel"
+		return 0
+	elif [[ $diag_exit == 1 ]]; then
+		# <Cancel>
+		return 1
+	elif [[ $diag_exit == 2 ]]; then
+		# <Select>
+		local sel="${sel#HELP }"
+		local sel_cur="${sel% *}"
+		#local sel_radio="${sel#* }"
+		echo -n "$sel_cur"
+		return 0
+	else
+		# <ESC><ESC>
+		return 1
+	fi
+}
+
 # $1: title
 # $2: description
 # $3: default item
@ -526,9 +608,9 @@ function PARTITIONING_SCHEME_show()  { return 0; }
 function PARTITIONING_SCHEME_help()  { echo "Select the desired partitioning scheme."; }
 function PARTITIONING_SCHEME_menu()  {
 	local sel
-	if sel="$(menu_radiolist \
+	if sel="$(menu_radiolist_labeled \
 		"Select partitioning scheme" \
-		"Select which partitioning scheme you want to follow. Have a look at the help text for this option (available in the menu) for details." \
+		"Select which partitioning scheme you want to follow. Have a look at the help text for this option (available in the menu) for more details.\n\nAll options support EFI/BIOS, swap and some form of encryption (luks/zfs).\n" \
 		"$PARTITIONING_SCHEME" \
 		"${ALL_PARTITIONING_SCHEMES[@]}")"
 	then
@ -559,9 +641,20 @@ function TIMEZONE_label() { echo "($TIMEZONE)"; }
 function TIMEZONE_show()  { return 0; }
 function TIMEZONE_help()  { echo "The timezone for the new system."; }
 function TIMEZONE_menu()  {
-	# TODO
-	true
+	local sel
+	if sel="$(menu_radiolist \
+		"Select timezone" \
+		"Select which timezone to use." \
+		"$TIMEZONE" \
+		"${ALL_TIMEZONES[@]}")"
+	then
+		# Save timezone
+		TIMEZONE="$sel"
 		UNSAVED_CHANGES=true
+	else
+		# Return to menu
+		true
+	fi
 }

 function KEYMAP_tag()   { echo "Keymap"; }
@ -795,13 +888,7 @@ function save() {
 ################################################
 # Disk configuration

-create_btrfs_raid_layout swap=8GiB luks=true /dev/sdX
-luks_getkeyfile() {
-	case "\$1" in
-		#'my_luks_partition') echo -n '/path/to/my_luks_partition_keyfile' ;;
-		*) echo -n "/path/to/luks-keyfile" ;;
-	esac
-}
+$(define_disk_layout)


 ################################################
--- a/gentoo.conf.example
+++ b/gentoo.conf.example
@ -15,53 +15,57 @@
 #
 # Be sure to only define one layout!

-# 1. create_single_disk_layout
-#
-# This layout creates the most common partitioning scheme on a single disk, i.e.
-# one boot, one swap and one root partition. Swap can be disabled and the root
-# partition can be luks encrypted. This is probably the layout you are most familiar with.
-#
-# Parameters:
-#   swap=<size>           Create a swap partition with given size, or no swap
-#                         at all if set to false
-#   type=[efi|bios]       Selects the boot type. Defaults to efi if not given.
-#   luks=[true|false]     Encrypt root partition. Defaults to false if not given.
-#   root_fs=[ext4|btrfs]  Root filesystem
-#create_single_disk_layout swap=8GiB type=efi luks=true root_fs=ext4 /dev/sdX
+function disk_configuration() {
+	create_classic_single_disk_layout swap=8GiB type=efi luks=true root_fs=ext4 /dev/sdX

-# 2. create_raid0_luks_layout
-#
-# This layout creates the single disk layout on multiple disks and combines
-# the swap and root partitions in separate raid0 arrays. Useful if you e.g. have
-# several nvme drives and want greater speed. Only one boot partition will actually
-# be used though.
-#
-# Parameters:
-#   swap=<size>           Create a swap partition with given size for each disk,
-#                         or no swap at all if set to false
-#   type=[efi|bios]       Selects the boot type. Defaults to efi if not given.
-#   root_fs=[ext4|btrfs]  Root filesystem
-# Careful: You will get N times the swap amount, so be sure to divide beforehand.
-#create_raid0_luks_layout swap=4GiB type=efi root_fs=ext4 /dev/sd{X,Y}
+	# 1. create_classic_single_disk_layout
+	#
+	# This layout creates the most common partitioning scheme on a single disk, i.e.
+	# one boot, one swap and one root partition. Swap can be disabled and the root
+	# partition can be luks encrypted. This is probably the layout you are most familiar with.
+	#
+	# Parameters:
+	#   swap=<size>           Create a swap partition with given size, or no swap
+	#                         at all if set to false
+	#   type=[efi|bios]       Selects the boot type. Defaults to efi if not given.
+	#   luks=[true|false]     Encrypt root partition. Defaults to false if not given.
+	#   root_fs=[ext4|btrfs]  Root filesystem
+	#create_classic_single_disk_layout swap=8GiB type=efi luks=true root_fs=ext4 /dev/sdX

-# 3. create_btrfs_raid_layout
-#
-# This layout is the same as the single_disk_layout, but uses btrfs as the root
-# filesystem and allows you to put additional disks into the btrfs device pool.
-# Only the first disk will have boot and swap partitions, the other disks will
-# directly be used in the btrfs device pool. If encryption is enabled, all disks
-# must be encrypted separately, as btrfs doesn't support encryption itself.
-# Also works with a single device.
-#
-# Parameters:
-#   swap=<size>                Create a swap partition with given size, or no swap
-#                              at all if set to false
-#   type=[efi|bios]            Selects the boot type. Defaults to efi if not given.
-#   luks=[true|false]          Encrypt root partition and btrfs devices. Defaults
-#                              to false if not given.
-#   raid_type=[raid0|raid1]    Select raid type. Defaults to raid0.
-#create_btrfs_raid_layout swap=8GiB luks=false raid_type=raid0 /dev/sd{X,Y}
-create_btrfs_raid_layout swap=8GiB luks=true /dev/sdX
+	# 2. create_raid0_luks_layout
+	#
+	# This layout creates the single disk layout on multiple disks and combines
+	# the swap and root partitions in separate raid0 arrays. Useful if you e.g. have
+	# several nvme drives and want greater speed. Only one boot partition will actually
+	# be used though.
+	#
+	# Parameters:
+	#   swap=<size>           Create a swap partition with given size for each disk,
+	#                         or no swap at all if set to false
+	#   type=[efi|bios]       Selects the boot type. Defaults to efi if not given.
+	#   root_fs=[ext4|btrfs]  Root filesystem
+	# Careful: You will get N times the swap amount, so be sure to divide beforehand.
+	#create_raid0_luks_layout swap=4GiB type=efi root_fs=ext4 /dev/sd{X,Y}
+
+	# 3. create_btrfs_centric_layout
+	#
+	# This layout is the same as the single_disk_layout, but uses btrfs as the root
+	# filesystem and allows you to put additional disks into the btrfs device pool.
+	# Only the first disk will have boot and swap partitions, the other disks will
+	# directly be used in the btrfs device pool. If encryption is enabled, all disks
+	# must be encrypted separately, as btrfs doesn't support encryption itself.
+	# Also works with a single device.
+	#
+	# Parameters:
+	#   swap=<size>                Create a swap partition with given size, or no swap
+	#                              at all if set to false
+	#   type=[efi|bios]            Selects the boot type. Defaults to efi if not given.
+	#   luks=[true|false]          Encrypt root partition and btrfs devices. Defaults
+	#                              to false if not given.
+	#   raid_type=[raid0|raid1]    Select raid type. Defaults to raid0.
+	#create_btrfs_centric_layout swap=8GiB luks=false raid_type=raid0 /dev/sd{X,Y}
+	#create_btrfs_centric_layout swap=8GiB luks=true /dev/sdX
+}


 ################################################
@ -121,7 +125,7 @@ create_btrfs_raid_layout swap=8GiB luks=true /dev/sdX
 # By default this function returns the same keyfile for all partitions.
 # If you want to make this more granular, run the install script and
 # select here based on the id reported in the partitioning overview.
-luks_getkeyfile() {
+function luks_getkeyfile() {
 	case "$1" in
 		#'my_luks_partition') echo -n '/path/to/my_luks_partition_keyfile' ;;
 		*) echo -n "/path/to/luks-keyfile" ;;
--- a/scripts/config.sh
+++ b/scripts/config.sh
@ -252,13 +252,13 @@ expand_ids() {
 	done
 }

-# Example 1: Single disk, 3 partitions (efi, swap, root)
+# Single disk, 3 partitions (efi, swap, root)
 # Parameters:
 #   swap=<size>           Create a swap partition with given size, or no swap at all if set to false
 #   type=[efi|bios]       Selects the boot type. Defaults to efi if not given.
 #   luks=[true|false]     Encrypt root partition. Defaults to false if not given.
 #   root_fs=[ext4|btrfs]  Root filesystem
-create_single_disk_layout() {
+create_classic_single_disk_layout() {
 	local known_arguments=('+swap' '?type' '?luks' '?root_fs')
 	local extra_arguments=()
 	declare -A arguments; parse_arguments "$@"
@ -314,7 +314,11 @@ create_single_disk_layout() {
 	fi
 }

-# Example 2: Multiple disks, with raid 0 and luks
+create_single_disk_layout() {
+	die "'create_single_disk_layout' is deprecated, please use 'create_classic_single_disk_layout' instead. It is fully option-compatible to the old version."
+}
+
+# Multiple disks, with raid 0 and luks
 # - efi:  partition on all disks, but only first disk used
 # - swap: raid 0 → fs
 # - root: raid 0 → luks → fs
@ -377,14 +381,14 @@ create_raid0_luks_layout() {
 	fi
 }

-# Example 3: Multiple disks, up to 3 partitions on first disk (efi, maybe swap, dm-crypt for btrfs).
+# Multiple disks, up to 3 partitions on first disk (efi, optional swap, root with btrfs).
 # Additional devices will be first encrypted and then put directly into btrfs array.
 # Parameters:
 #   swap=<size>                Create a swap partition with given size, or no swap at all if set to false
 #   type=[efi|bios]            Selects the boot type. Defaults to efi if not given.
 #   luks=[true|false]          Encrypt root partition and btrfs devices. Defaults to false if not given.
 #   raid_type=[raid0|raid1]    Select raid type. Defaults to raid0.
-create_btrfs_raid_layout() {
+create_btrfs_centric_layout() {
 	local known_arguments=('+swap' '?type' '?raid_type' '?luks')
 	local extra_arguments=()
 	declare -A arguments; parse_arguments "$@"
@ -449,3 +453,7 @@ create_btrfs_raid_layout() {
 	DISK_ID_ROOT_TYPE="btrfs"
 	DISK_ID_ROOT_MOUNT_OPTS="defaults,noatime,compress=zstd,subvol=/root"
 }
+
+create_btrfs_raid_layout() {
+	die "'create_btrfs_raid_layout' is deprecated, please use 'create_btrfs_centric_layout' instead. It is fully option-compatible to the old version."
+}