support for this has not existed since v2.0~a24-1 !!
until 4d22ca948a (v2.0~a24-1), `PROGRAM` was
defined as `PROGRAM="$(basename ${0})"`. then this commit simply got rid
of the definition.
it then flipped back and forth a bit in a few ways, but always sticking
to a simple fixed "live-build" type string after that commit, as it has
been ever since.
the code removed here has thus been junk since then, and the documentation
corrected here out of date since then.
the checking of `LB_CONFIG` is also possibly junk, but i know too little
about it. it was introduced in v1.0~a43-1 in commit
705a4178e7 with a changelog entry of
"Centraly evaluate LH_CONFIG for custom configuration file."
Gbp-Dch: Short
just as most scripts are skipped if their stagefile exists (indicating
that they have already been run to completion), including chroot
preparation scripts in install mode, this implements the same guard for
chroot prep remove mode, such that they exit early if their stagefile
does not exist, indicating that the modification has already been removed.
(also override-able by --force in the same way).
this basically just uses a tweaked copy of Check_stagefile().
Gbp-Dch: Short
no backwards compatibility hack for reading the old var from existing
saved config used because this was previously stored in the alternate
format config/build file.
Gbp-Dch: Short
no backwards compatibility hack for reading the old var from existing
saved config used because this was previously stored in the alternate
format config/build file.
Gbp-Dch: Short
back in v4.0~a6-1 a transition process was started to move the live-build
config to a new format. the new format was INI style, and required
parsing functions to read/write values, compared to the existing format
which was just shell script code setting variables.
this partial transition is the explanation for the existence of the
`New_configuration()` function, and understanding this is important to
understanding the purpose of it - it is not in fact intended for creating
a new configuration, it is just related to the new config format
transition.
the positives of the new format were that it was somewhat cleaner looking,
while the negative was the terrible relative efficiency.
the file `config/build` was created to hold options in this new format.
the transition was only ever completed for a handful of config options:
- architecture
- archive areas and parent archive areas
- live image name
- live image type
a 'configuration version' attribute was also saved, which is not used by
anything.
the bootstrap-mirror and parent-bootstrap-mirror attributes are pointlessly
stored in it seemingly resulting from work done in v4.0~a17-1. (they are
also stored in another config file from which the value is actually used).
it in fact seems to have been a source of confusion for Raphaël in
authoring 44b9b0a650, since the new
`[parent]-distribution-{chroot|binary}` options it introduced were stored
both in `config/bootstrap` and in `config/build`, while only used from the
former. i expect, understandably, that he thought that `config/build` was
just an information file.
Gbp-Dch: Short
thus it can correctly indicate success/fail status instead of always
indicating failure. when a user asks for usage with -u|--usage then we
should exit in success mode rather than failure as when usage in printed
in response to incorrect usage.
Gbp-Dch: Short
this means that the usage goes from:
lb {-h|--help|-u|--usage|-v|--version}
lb COMMAND [OPTIONS]
to:
lb {-h|--help|-u|--usage|-v|--version}
lb [FRONTEND_OPTIONS] COMMAND [COMMAND_OPTIONS]
though it is probably not worth is to update the description in the
manpages...? hmm...
so for instance this matters for color control with --color|--no-color
(you already had full control via environment vars). previously you could
do `lb COMMAND --no-color` to turn off colour, only to find that output
at the frontend level was still coloured (the option is processed at the
command context level, not the frontend), so you might try to instead use
`lb --no-color COMMAND`, only to find that this was not supported. Well
now it is, and used at the frontend level will fully control colour output
(after the command is processed anyway).
the full set of common options are thus available (except --force) at the
frontend level, and thus for instance all Echo_*() helpers used in the
frontend will work correctly after args are processed.
furthermore usage like `lb --color --help` will actually work. (not that
color is used there, but this previously would have failed with the
frontend treating the `--color` argument as the command; that's the point!)
Gbp-Dch: Short
this was previously not done in 8b109ffb96
to keep the renaming simple, but leaving the variable plural is a cause
for confusion.
since this property is stored in the INI style config/build config file
rather than a shell script based one, at the property there is already
singular, there was no need for a backwards compatibility hack.
Gbp-Dch: Short
being done in Prepare_config() meant that it would get saved into the
config stored on disk which is not what was intended.
being saved on disk is not a big problem, since the injection of the
dynamically determined option is always done on top of the value read
from the saved config anyway, so you'd always end up with two copies of
the option given to apt, the first being from the saved config, the second
being the more correct dynamically determined one, overriding the first.
so there is no functional change here, just better achieving what was
intended.
Gbp-Dch: Ignore
note that the bit of code removed from source_debian relies upon a
variable LB_TASKS which itself is an old leftover artefact from before
v4.0.
Gbp-Dch: Short
since everywhere where 'apt' is a permitted value, 'apt-get' is also, it
just wasn't listed in the option's documentation and thus was also not
listed in the new validation check.
Gbp-Dch: Short
80aa5ab611 implemented a hack to handle
replacement of LB_LINUX_FLAVOURS with LB_LINUX_FLAVOURS_WITH_ARCH in
config files, but implemented it in the wrong place.
adding a conditional conversion within the config file meant that the old
value would only be read from **new** config files that are created
obviously without it, including re-saved configs if `lb config` were
re-run with additional options (not recommended). any existing value in an
existing config file would actually be ignored.
the right place to read the old value was in the Set_defaults() function
(since renamed).
a second issue also existed with the hack, it failed to excape the `$`
and thus printed the existing value of $LB_LINUX_FLAVOURS into the
conditional check being constructed in the config file, instead of
printing the name of the variable. the check embedded into the config
file thus became this on an amd64 machine:
```
if [ -n "amd64" ]
then
LB_LINUX_FLAVOURS_WITH_ARCH="amd64"
fi
```
which is clearly not what was intended.
Gbp-Dch: Short
- add a validation check where an error will be printed
- replace the check done in the grub scripts with one that simple exits
if executed bypassing the validation check
Gbp-Dch: Short
the stuff in defaults.sh is only partially to do with setting default
config values, it also does other prep work like centralised comma
separated value to space separated conversion, and validation.
this is split into two parts to keep the diff simple, first we move the
two small functions from configuration.sh into default.sh...
Gbp-Dch: Short
it mostly applies defaults where a value does not exist, but does more in
some cases. the new name better reflects its usage and functionality.
Gbp-Dch: Short
whilst some parts of the codebase were set up to work with multiple types
specified, others did not work with it and would not necessarily be easy
to adjust. this thus makes some tweaks to adjust things accordingly.
- option renamed to singular form (maintaining backwards compatibility)
- a validation check has been added
- unnecessary glob style type references fixed
- checks with In_list changed to a direct singular comparison
- typo of type "netboot" written as just "net" fixed (though unreachable
so of no consequence; really the code could be removed but it's trivial)
Gbp-Dch: Short
this option actually only has an impact when used for `lb config`; it thus
was incorrectly accepted and captured by Arguments() and the documentation
was wrong.
going back through git history, this has been incorrect since the v0.99 days.
also, reorganised the list alphabetically (no-color was inserted in the
wrong place).
Gbp-Dch: Short
two parts of the code worked with both comma and space separated lists,
while two others only worked with comma separated.
swapping out commas with spaces when we setup the var in
Set_config_defaults() means that individual scripts no longer need to worry
about it and everything supports both; and that we can avoid the
IFS/OLDIFS mess.
Gbp-Dch: Short
Lyndon Brown
Raphaël Hertzog
Raphaël Hertzog