void-mklive/mklive.sh.in

#!/bin/sh
#-
# Copyright (c) 2009-2012 Juan Romero Pardines.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-
trap "echo; error_out $?" INT QUIT

info_msg() {
	printf "\033[1m$@\n\033[m"
}

mount_pseudofs() {
	local fs

	for fs in sys proc dev; do
		if [ ! -d "$ROOTFS/$fs" ]; then
			mkdir -p "$ROOTFS/$fs"
		fi
		mount --bind /$fs "$ROOTFS/$fs" || error_out $?
	done
}

umount_pseudofs() {
	local fs

	for fs in sys proc dev; do
		umount -f "$ROOTFS/$fs" >/dev/null 2>&1
	done
}

error_out() {
	umount_pseudofs

	info_msg "There was an error! cleaning up $BUILDDIR, exiting..."

	[ -d "$BUILDDIR" ] && rm -rf "$BUILDDIR"
	[ -f "$LOGFILE" ] && rm -f "$LOGFILE"

	exit 1
}

write_etc_motd() {
	cat >> "$ROOTFS/etc/motd" <<_EOF
###############################################################################
  Autogenerated by void-mklive @@MKLIVE_VERSION@@
-------------------------------------------------------------------------------

Welcome to the Void Linux Live system, you have been autologged in.
This user has full sudo(8) permissions without any password, be careful
executing commands through sudo(8).

To play with package management use the xbps-bin(8) and xbps-repo(8)
utilities. Please visit:

	http://code.google.com/p/xbps/

for more information and/or documentation about using the X Binary
Package System. If you think it is useful, please make a donation
to improve further development from the above URL, thanks.

To start the installation please type:

	$ sudo void-installer

and follow the on-screen instructions. Thanks for trying Void Linux.

###############################################################################
_EOF
}

write_conf_file() {
	cat > "$1" <<_EOF
# *-*- sh -*-*
# Default configuration file for vmklive-@VERSION@.
#
# List of packages to be installed into the live image.
# At least 'base-system' or 'base-system-live' is required.
PACKAGE_LIST="base-system-live"

# Syslinux splash image.
SPLASH_IMAGE=/usr/share/void-artwork/splash.png

# Default keymap to use.
KEYMAP=us

# Default locale to use.
LOCALE=en_US

# Path to XBPS utilities.
#XBPS_BIN_CMD=xbps-bin
#XBPS_REPO_CMD=xbps-repo
#XBPS_UHELPER_CMD=xbps-uhelper

# XBPS cache directory to install packages from.
#REPOSITORY_CACHE=/blah/foo

_EOF
	chmod 644 "$1"
}

usage()
{
	cat <<_EOF
Usage: $(basename $0) [options]

Options:
 -C file		Path to configuration file (defaults to ~/.mklive.conf)
 -c (gzip|bzip2|xz) 	Compression type for the squashfs/initramfs image.
 -k version		Kernel version to use.
 -o outfile		Output file name for the ISO image.
 -s splash		Splash image file for isolinux.
_EOF
	exit 1
}

#
# main()
#
while getopts "C:c:k:o:s:h" opt; do
	case $opt in
	C) CONFIG_FILE="$OPTARG";;
	c) COMPRESSTYPE="$OPTARG";;
	k) KERNELVERSION="$OPTARG";;
	o) OUTPUT_FILE="$OPTARG";;
	s) SPLASH_IMAGE="$OPTARG";;
	h) usage;;
	esac
done
shift $(($OPTIND - 1))

if [ -z "$KERNELVERSION" ]; then
	KERNELVERSION="$(uname -r)"
fi

# Set defaults
if [ -z "$CONFIG_FILE" ]; then
	CONFIG_FILE="$HOME/.mklive.conf"
fi
if [ -z "$OUTPUT_FILE" ]; then
	OUTPUT_FILE="$HOME/void-live-$(uname -m)-${KERNELVERSION}-$(date +%Y%m%d).iso"
fi
LOGFILE="$(mktemp -t vmklive-XXXXXXXXXX.log)"

if [ -z "$SYSLINUX_DATADIR" ]; then
	SYSLINUX_DATADIR=/usr/share/syslinux
fi
if [ -z "$GRUB_DATADIR" ]; then
	GRUB_DATADIR=/usr/share/grub
fi
if [ -z "$MKLIVE_DATADIR" ]; then
	MKLIVE_DATADIR=/usr/share/void-mklive
fi
if [ -z "$SPLASH_IMAGE" ]; then
	SPLASH_IMAGE=/usr/share/void-artwork/splash.png
fi
if [ -z "$XBPS_REPO_CMD" ]; then
	XBPS_REPO_CMD=xbps-repo
fi
if [ -z "$XBPS_BIN_CMD" ]; then
	XBPS_BIN_CMD=xbps-bin
fi
if [ -z "$XBPS_UHELPER_CMD" ]; then
	XBPS_UHELPER_CMD=xbps-uhelper
fi
if [ -z "$COMPRESSTYPE" ]; then
	COMPRESSTYPE=xz
fi

# Create or read configuration file.
if [ ! -r $CONFIG_FILE ]; then
	info_msg "Creating config file at $CONFIG_FILE."
	write_conf_file $CONFIG_FILE
fi

. $CONFIG_FILE

if [ -z "$PACKAGE_LIST" ]; then
	PACKAGE_LIST="base-system-live"
else
	PACKAGE_LIST="$PACKAGE_LIST"
fi
if [ ! -f $SYSLINUX_DATADIR/isolinux.bin ]; then
	echo "Missing required isolinux files in $SYSLINUX_DATADIR, exiting..."
	exit 1
fi

# Check for root permissions.
if [ "$(id -u)" -ne 0 ]; then
	echo "Must be run as root, exiting..."
	exit 1
fi

ISO_VOLUME="VOID_LIVE"
BUILDDIR=$(mktemp --tmpdir=$HOME -d) || exit 1
BUILDDIR=$(readlink -f $BUILDDIR)
ROOTFS="$BUILDDIR/rootfs"
BOOT_DIR="$BUILDDIR/boot"
ISOLINUX_DIR="$BOOT_DIR/isolinux"
GRUB_DIR="$BOOT_DIR/grub"
ISOLINUX_CFG="$ISOLINUX_DIR/isolinux.cfg"

#
# Check there are repos registered before anything.
#
${XBPS_REPO_CMD} list >/dev/null 2>&1
if [ $? -ne 0 ]; then
	echo "No repositories available, exiting..."
	error_out
fi

#
# Mount pseudofs in the target rootfs.
#
mount_pseudofs
mkdir -p "$ROOTFS/tmp" "$ISOLINUX_DIR" "$GRUB_DIR"

XBPS_ARGS="-r $ROOTFS -y"
if [ -n "$REPOSITORY_CACHE" ]; then
	XBPS_ARGS="$XBPS_ARGS -c $REPOSITORY_CACHE"
fi
XBPS_VERSION=$($XBPS_BIN_CMD -V|awk '{print $2}')
case $XBPS_VERSION in
	# XBPS >= 0.16
	[0-9].[1-9][6-9]*) XBPS_016=1;;
esac

info_msg "Redirecting stdout/stderr to $LOGFILE ..."
info_msg "[1/10] Installing packages into the rootfs..."
for f in ${PACKAGE_LIST}; do
	info_msg "  $f"
done
# Check that all pkgs are reachable.
${XBPS_BIN_CMD} ${XBPS_ARGS} -n install ${PACKAGE_LIST} >>$LOGFILE 2>&1
if [ $? -ne 0 ]; then
	info_msg "Missing required binary packages, exiting..."
	error_out
fi
${XBPS_BIN_CMD} ${XBPS_ARGS} install ${PACKAGE_LIST} \
	2>&1|cat >> $LOGFILE || error_out
${XBPS_BIN_CMD} ${XBPS_ARGS} autoupdate \
	2>&1|cat >> $LOGFILE || error_out
${XBPS_BIN_CMD} ${XBPS_ARGS} autoremove \
	2>&1|cat >> $LOGFILE || error_out

${XBPS_BIN_CMD} -r "$ROOTFS" list > \
	"${OUTPUT_FILE%.iso}"-package-list.txt || error_out

#
# Prepare /etc/motd.
#
info_msg "[2/10] Creating /etc/motd..."
mkdir -p "$ROOTFS"/etc
write_etc_motd

#
# Create the initramfs with XZ compression.
#
info_msg "[3/10] Creating initramfs image ($COMPRESSTYPE)..."
dracut --no-hostonly --add "dmsquash-live vmklive" --${COMPRESSTYPE} \
	"${BOOT_DIR}/initrd.lz" ${KERNELVERSION} 2>/dev/null || error_out

#
# Copy the linux image to the target directory.
#
info_msg "[4/10] Copying kernel image/modules..."
cp -f /boot/vmlinuz-${KERNELVERSION} "${BOOT_DIR}/vmlinuz" || error_out $?
mkdir -p "$ROOTFS/lib/modules"
cp -a /lib/modules/${KERNELVERSION} "$ROOTFS/lib/modules" || error_out $?

# Generate a sane xbps.conf for the rootfs.
rm -f $ROOTFS/etc/xbps/xbps.conf
echo "# xbps.conf generated by void-mklive-@@MKLIVE_VERSION@@" \
	> $ROOTFS/etc/xbps/xbps.conf
echo "TransactionFrequencyFlush = 0" \
	>> $ROOTFS/etc/xbps/xbps.conf
echo "virtual-package rsyslog { targets = syslog-daemon-0 }" \
	>> $ROOTFS/etc/xbps/xbps.conf
echo "virtual-package dcron { targets = cron-daemon-0 }" \
	>> $ROOTFS/etc/xbps/xbps.conf
echo "virtual-package kmod { targets = module-init-tools-3.17 }" \
	>> $ROOTFS/etc/xbps/xbps.conf
_devel=$($XBPS_UHELPER_CMD -r $ROOTFS version xbps-devel)
if [ -n "${_devel}" ]; then
	echo "virtual-package xbps-devel { targets = xbps-9999 }" \
		>> $ROOTFS/etc/xbps/xbps.conf
fi

# Generate a conf for local repositories.
cat > $ROOTFS/etc/xbps/local-repos.conf <<_EOF
repositories = {
	# XBPS >= 0.16
	/packages,
}
_EOF
# Generate a conf for remote repositories.
cat > $ROOTFS/etc/xbps/network-repos.conf <<_EOF
repositories = {
	# XBPS >= 0.16
	http://xbps.hosting-unlimited.org/binpkgs,
	http://xbps.goodluckwith.us/binpkgs,
	http://xbps.nopcode.org/repos/current,
}
_EOF
chmod 644 $ROOTFS/etc/xbps/*.conf || error_out $?

# Create local repos for base-system and grub packages required by
# the void-installer pkg.
pkgs=$($XBPS_BIN_CMD -r /tmp/blah -n install base-system grub)
set -- ${pkgs}
while [ $# -ne 0 ]; do
	pkgn=$1; action=$2; ver=$3; repo=$4; binpkg=$5; arch=$6
	if [ -z "$XBPS_016" ]; then
		arch=$(basename $repo)
		shift 5
	else
		shift 6
	fi
	mkdir -p $ROOTFS/packages/$arch
	bpkg=$repo/$arch/$binpkg
	cp -f $bpkg $ROOTFS/packages/$arch
done
if [ -n "$XBPS_016" ]; then
	$XBPS_REPO_CMD genindex $ROOTFS/packages 2>&1 >>$LOGFILE
	rm -f $ROOTFS/packages/index-files.plist
else
	for f in $ROOTFS_REPODIR/*; do
		${XBPS_REPO_CMD} genindex $f 2>&1 >>$LOGFILE
		rm -f $f/rindex-files.plist
	done
fi

# install lsblk and blkid from util-linux. to avoid installing
# the whole package.
_lsblk=$(which lsblk)
_blkid=$(which blkid)
install -Dm755 ${_lsblk} "$ROOTFS/usr/bin/lsblk" || error_out $?
install -Dm755 ${_blkid} "$ROOTFS/sbin/blkid" || error_out $?

# install mount from util-linux.
install -Dm755 /bin/mount "$ROOTFS/bin/mount" || error_out $?

#
# The pseudofs aren't needed anymore in target rootfs.
#
umount_pseudofs

#
# Prepare isolinux files in the target rootfs.
#
info_msg "[5/10] Preparing isolinux support for BIOS..."
cp -f $SYSLINUX_DATADIR/isolinux.bin "$ISOLINUX_DIR" || error_out $?
cp -f $SYSLINUX_DATADIR/vesamenu.c32 "$ISOLINUX_DIR" || error_out $?
cp -f $MKLIVE_DATADIR/isolinux.cfg.in \
	"$ISOLINUX_DIR"/isolinux.cfg || error_out $?

if [ -f "$SPLASH_IMAGE" ]; then
	cp -f $SPLASH_IMAGE "$ISOLINUX_DIR" || error_out $?
fi
sed -i  -e "s|@@SPLASHIMAGE@@|$(basename $SPLASH_IMAGE)|" \
	-e "s|@@KERNVER@@|${KERNELVERSION}|" \
	-e "s|@@KEYMAP@@|${KEYMAP}|" \
	-e "s|@@LOCALE@@|${LOCALE}|" $ISOLINUX_DIR/isolinux.cfg

#
# Prepare grub files for EFI.
#
info_msg "[6/10] Preparing GRUB support for EFI..."
cp -f $MKLIVE_DATADIR/grub.cfg $GRUB_DIR || error_out $?
cp -f $MKLIVE_DATADIR/grub_void.cfg.in $GRUB_DIR/grub_void.cfg || error_out $?
sed -i  -e "s|@@SPLASHIMAGE@@|$(basename $SPLASH_IMAGE)|" \
	-e "s|@@KERNVER@@|${KERNELVERSION}|" \
	-e "s|@@KEYMAP@@|${KEYMAP}|" \
	-e "s|@@LOCALE@@|${LOCALE}|" $GRUB_DIR/grub_void.cfg
mkdir -p $GRUB_DIR/fonts $GRUB_DIR/locale || error_out $?
cp -f $GRUB_DATADIR/unicode.pf2 $GRUB_DIR/fonts || error_out $?
cp -f /boot/grub/locale/* $GRUB_DIR/locale || error_out $?

# Create EFI vfat image.
dd if=/dev/zero of=$GRUB_DIR/efiboot.img bs=1024 count=4096 \
	2>&1 | cat >>$LOGFILE || error_out $?
mkfs.vfat -F12 -S 512 -n "grub_uefi" "$GRUB_DIR/efiboot.img" \
	2>&1 | cat >>$LOGFILE || error_out $?

GRUB_EFI_TMPDIR="$(mktemp --tmpdir=$HOME -d)"
LOOP_DEVICE="$(losetup --show --find ${GRUB_DIR}/efiboot.img)"
mount -o rw,flush -t vfat "${LOOP_DEVICE}" "${GRUB_EFI_TMPDIR}" \
	2>&1 | cat >>$LOGFILE || error_out $?

mkdir -p "${GRUB_EFI_TMPDIR}/EFI/boot/" || error_out $?
cd "$BUILDDIR" || error_out $?
grub-mkstandalone --directory="/usr/lib/grub/x86_64-efi" --format="x86_64-efi" \
	        --compression="xz" --output="${GRUB_EFI_TMPDIR}/EFI/boot/bootx64.efi" \
		        "boot/grub/grub.cfg" 2>&1 | cat >>$LOGFILE || error_out $?
umount "$GRUB_EFI_TMPDIR" || error_out $?
losetup --detach "${LOOP_DEVICE}" || error_out $?
rm -rf $GRUB_EFI_TMPDIR || error_out $?

#
# Prepare the squashed rootfs image.
#
info_msg "[7/10] Creating squashfs image ($COMPRESSTYPE) from rootfs..."
# Find out required size for the rootfs and create an ext3fs image off it.
ROOTFS_SIZE=$(du -sk "$ROOTFS"|awk '{print $1}')
mkdir -p "$BUILDDIR/tmp/LiveOS"
dd if=/dev/zero of="$BUILDDIR/tmp/LiveOS/ext3fs.img" \
	bs="$((${ROOTFS_SIZE}+($ROOTFS_SIZE/6)))K" count=1 2>&1 | cat >>$LOGFILE || error_out $?
mkdir -p "$BUILDDIR/tmp-rootfs"
mkfs.ext3 -F -m1 "$BUILDDIR/tmp/LiveOS/ext3fs.img" 2>&1 | cat >>$LOGFILE || error_out $?
mount -o loop "$BUILDDIR/tmp/LiveOS/ext3fs.img" "$BUILDDIR/tmp-rootfs" || error_out $?
cd $BUILDDIR
cp -a rootfs/* tmp-rootfs/
umount -f "$BUILDDIR/tmp-rootfs"
mkdir -p "$BUILDDIR/LiveOS"

mksquashfs "$BUILDDIR/tmp" "$BUILDDIR/LiveOS/squashfs.img" \
	-comp ${COMPRESSTYPE} 2>&1 | cat >> $LOGFILE || error_out
chmod 444 "$BUILDDIR/LiveOS/squashfs.img" || error_out $?

info_msg "[8/9] Removing rootfs directory..."
rm -rf "$ROOTFS" "$BUILDDIR/tmp-rootfs" "$BUILDDIR/tmp" || error_out $?

#
# Prepare the ISO image.
#
info_msg "[9/10] Building ISO image..."
xorriso -as mkisofs \
	-iso-level 3 -rock -joliet \
	-max-iso9660-filenames -omit-period \
	-omit-version-number -relaxed-filenames -allow-lowercase \
	-volid "VOID_LIVE" \
	-eltorito-boot boot/isolinux/isolinux.bin \
	-eltorito-catalog boot/isolinux/boot.cat \
	-no-emul-boot -boot-load-size 4 -boot-info-table \
	-eltorito-alt-boot --efi-boot boot/grub/efiboot.img -no-emul-boot \
	-isohybrid-mbr /usr/share/syslinux/isohdpfx.bin \
	-output "$OUTPUT_FILE" "$BUILDDIR" 2>&1 | cat >>$LOGFILE || error_out $?

info_msg "[10/10] Removing build directory..."
rm -rf "$BUILDDIR" || error_out $?

hsize=$(du -sh "$OUTPUT_FILE"|awk '{print $1}')
info_msg "Created $(readlink -f $OUTPUT_FILE) ($hsize) successfully."

exit 0